Product List

No. 423L
No. 423L Professional Trowel, Left
  • 1/8” open x 1/16” flat x 1/8” deep V-notched trowel. Blade is notched on the left side of the blade for left-handed users.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 424
No. 424 Professional Trowel
  • 3/32” open x 3/32” flat x 3/32” deep V-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 425
No. 425 Professional Trowel
  • 1/4” open x 3/16” deep V-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 426
No. 426 Professional Trowel
  • 1/4” open x 1/4” flat x 1/4” deep square-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 427
No. 427 Professional Trowel
  • 1/2” open x 1/2” deep V-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive or mortar in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 428
No. 428 Professional Trowel
  • 1/4” open x 1/4” flat x 3/8” deep square-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 429
No. 429 Professional Trowel
  • 1/2” open x 1/2” flat x 1/2” deep square-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 430
No. 430 Professional Trowel
  • 1/8” open x 1/16” flat x 1/8” deep U-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 431
No. 431 Professional Trowel
  • 1/16” open x 1/16” flat x 1/16” deep V-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 434
No. 434 4" x 14" Finishing Trowel
  • 4” wide x 14” long trowel with no notches.
  • Useful for spreading patch.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.
No. 435
No. 435 Flex Axle Roller
  • Made with two pivoting axles each with seven steel star wheel wheel rollers (14 total).
  • As the roller is moved forward and backward, the axles pivot outwardly then inwardly.
  • This action mixes carpet fibers and pulls the seam edges together.
  • Star wheels press the carpet’s backing into the adhesive.
No. 436
No. 436 Straight Axle Roller
  • Solid axle with ten steel star rollers.
  • Star wheels effectively press the carpet’s backing into the hot melt adhesive.
  • Welded steel handle bracket is plated.
  • Rounded handle fits well in the palm of the hand.
No. 437
No. 437 Big Foot Roller
  • Made with wide ribbed roller sections.
  • Wide surface area on the ribbed surfaces protect delicate fibers better than star wheels.
  • Ribs produce concentrated pressure forcing carpet backing into the adhesive.
  • Best roller for fine denier saxony, plush, and velvet carpets.
No. 438
No. 438 6" Pro Roller
  • Solid axle spans six inches wide and has 18 steel star wheel rollers.
  • Provides adequate pressure even with 6” tape.
  • Steel bracket and handle stem are welded and plated for durability.
  • Hard plastic handle is rounded to fit well in the palm of the hand.
No. 445
No. 445 Knee Kicker
  • Recessed trigger for length adjustment in five settings from 17¾" to 21¾".
  • Visual pin depth dial provides nine different depth settings.
  • Power rods through pin plate provide support and improved force transfer.
  • Three nap grips, pin plate with 16 pins, standard thickness bumper.
No. 450
No. 450 Deluxe Strip Cutter
  • Long 1 7/8” blades cut wide architectural strip straight in a single cut.
  • Cuts regular strip straight or diagonally in a single cut.
  • Blade stabilizer prevents splaying of the blades to increase cutting efficiency.
  • Handle includes blade storage, travel adjustment, and locker for closing in storage.
No. 451
No. 451 Strip Cutter Blades (12)
  • Package of 12 replacement blades for the Crain No. 450 Deluxe Strip Cutter.
  • Cuts wide architectural strip straight in one cut.
  • Cuts regular strip straight or diagonally in one cut.
  • Packaging includes clear plastic box that snaps shut for storage.
No. 455
No. 455 Strip Saver Bag
  • Heavy-duty cloth bag slips over standard sized tack strip boxes.
  • Extra protection prevents boxes from tearing open to protect the strip.
  • Reinforced end panel with heavy-duty zipper and double-stitched handle.
  • Projects a professional image and improves efficiency.
No. 460
No. 460 Vinyl Sealer Bottle
  • Sealer bottle for sheet vinyl seams with non-marking stainless steel tip.
  • Precision formed stainless steel tip delivers the right amount of sealer.
  • The shape of the tip forms a fin that rides on the seamline to deliver sealer directly over the seam.
  • Directions for usage printed on each bottle. Bottle holds up to 6 oz. of sealer.
No. 470
No. 470 Glue Bottle
  • Great for storing and spreading adhesives. Lid seals tight to extend adhesive life.
  • High-impact plastic bottle holds up to 16 oz. of adhesive.
  • Narrow brush allows accurate application of adhesive, particularly in tight areas.
  • Metal lid includes extendable brush that goes to the bottom of the bottle.
No. 476
No. 476 Carpet Tractor
  • Includes three 2 ½” rows of star wheels mounted on a durable steel body.
  • Produces pressure on the seam to press the backing into the adhesive.
  • The three rows of star wheels mix yarns to reduce visibility.
  • Long, rounded body is optimal for hand pressure.
No. 496
No. 496 8" Carpet Shears
  • Angled handles easily position the blades for trimming off carpet tufts.
  • Extra-long 3” blades.
  • Finger loops are oversized for large fingers.
  • Right side loop accommodates multiple fingers for easy activation.
No. 497
No. 497 Case with Driving Head
  • Includes the driving head, tail block, transfer tube and head case.
  • Head case additionally holds an Auto-Lok tube and three extension tubes (not included).
  • Head case has wheels for easy transport.
  • Head case is made from tough blow-molded plastic with recessed latches and handles.
No. 498
No. 498 Case with Tubes & Auto-Lok
  • Includes three extension tubes, Auto-Lok tube, and tube case.
  • Tube case has recesses that hook on our head cases with wheels for easy transport.
  • Made from tough yet lightweight high-density blow-molded plastic.
  • Recessed latches and handles improve durability.
No. 498E
No. 498E Empty Tube Case
  • Includes the tube case only. Holds an Auto-Lok tube and up to three additional extension tubes.
  • Tube case has recesses that hook on our head cases with wheels for easy transport.
  • Made from tough yet lightweight high-density blow-molded plastic.
  • Recessed latches and handles improve durability.
No. 499
No. 499 Double Case Stretcher
  • Power handle has built-in stretch lock for partial stretches.
  • Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
  • Pin depth adjustment knob adjusts without screws or screwdrivers.
  • Double case design distributes weight and provides room for extra components. Built-in wheels for transport.
No. 499E
No. 499E Empty Stretcher Case Set
  • Includes both head and tube cases.
  • Holds the driving head, transfer tube, tail block, Auto-Lok tube, and 7 more extension tubes.
  • Head case includes wheels, and tube case hooks on the head case for easy transport.
  • Cases split to distribute weight. Also holds Roberts 10-239.
No. 500
No. 500 Single Case Stretcher
  • Power handle has built-in stretch lock for partial stretches.
  • Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
  • Pin depth adjustment knob adjusts without screws or screwdrivers.
  • Space saving single case design includes wheels for transport.
No. 500Z
No. 500Z Cotton Head
  • For use on Crain No. 499 and 500 Power Stretchers.
  • Recommended when stretching Berber, loop pile, and low-level commercial carpets.
  • Wire nap grips are less likely to pull or snag loops.
  • Installs easily. Nap grips are replaceable.
No. 501
No. 501 Auto-Lok Tube
  • Provides ultra-fast length adjustment for a connected train of extension tubes!
  • Push back on the tubes to extend, push buttons and pull back to shorten.
  • Adds up to 4 feet 8 inches to the stretcher in convenient 1½ inch increments.
  • Works with standard-sized diameter tubes.
No. 502
No. 502 3' Extension Tube
  • Adds up to 4 feet 8 inches of length.
  • Holes are punched rather than drilled for durability and precision.
  • Buttons are rounded for smooth tube adjustment.
  • Works with other standard size diameter poles.
No. 503
No. 503 Empty Single Case
  • Includes the head case only.
  • Holds the driving head, transfer tube, tail block, Auto-Lok tube, and up to 3 additional extension tubes.
  • Case has wheels for easy transport.
  • Tough yet lightweight blow-molded plastic. Latches and handles are recessed for added durability.
No. 505
No. 505 Knee Kicker
  • Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
  • Visual pin depth dial provides nine settings for various carpets.
  • Power rods through pin plate provide support and improved force transfer.
  • Three nap grips, pin plate with 16 pins, standard thickness bumper.
No. 506
No. 506 Mini Knee Kicker
  • Ultra-short minimum length of 14 ½” for use in cramped areas.
  • Durable telescoping steel tube construction with 4 length adjustments (14 ½ ” - 25”).
  • Visual pin depth dial provides nine settings for various carpets.
  • Three nap grips, pin plate with 16 pins, standard thickness bumper.
No. 507
No. 507 Stairway Stretcher
  • Provides a full and uniform stretch across the stair tread.
  • Begin at the top of the stairs and work downwards.
  • Stretch then tuck the stair below. Prevents sore knees!
  • Comes with carrying case.
No. 513
No. 513 Seam Repair Attachment
  • Replacement part for No. 512 Mini-Stretcher or No. 514 Mini-Stretcher w/Seam Att.
  • When attached, works as seam repair stretcher by pulling carpet together.
  • Can also be used for pattern matching when attached.
  • Top knob provides fast adjustment of pin depth.
Nos. 512, 513, & 514
No. 514 Mini-Stretcher with Seam Attachment
  • Stretch without tubes by hooking tail blade on the tack strip.
  • Stretches in tight areas or places a tail block can’t brace against opposite wall.
  • Power handle locks to hold a stretch.
  • Includes seam repair attachment for repairs and pattern matching.
No. 516
No. 516 3' Aluminum Stretcher Tube
  • Lightweight and rustproof.
  • Adds up to 4 feet 8 inches of length to a stretcher in 4 inch increments.
  • Score line on inner and outer tubes to align buttons with holes during length adjustment.
  • Works with other standard sized tubes.
No. 517
No. 517 5' Aluminum Stretcher Tube
  • Lightweight and rustproof.
  • Adds up to 8 feet 8 inches of length to a stretcher in 4 inch increments.
  • Score line on inner and outer tubes to align buttons with holes during length adjustment.
  • Works with other standard sized tubes.
No. 518
No. 518 Stair Claw
  • Stretches carpet across the stair tread and forms it around the nosing.
  • Hook the teeth in the carpet near the nosing, then pull down on the handle.
  • A pulling action is generated that stretches the carpet.
  • Bottom edge tucks up under the nosing. Recesses allow easy stapling.
No. 520
No. 520 Swivel-Lock Stretcher
  • 60° of free swivel for patterned carpet. Head locks at straight, 15° or 30° angles.
  • Power handle has built-in stretch lock for partial stretches.
  • Comes with Auto-Lok tube, 3 extension tubes, and transfer tube.
  • Comes with folding tail block. Available in double cases only.
No. 520Z
No. 520Z Cotton Head
  • For use on Crain No. 520 Swivel-Lock Stretchers.
  • Recommended when stretching Berber, loop pile, and low-level commercial carpets.
  • Wire nap grips are less likely to pull or snag loops.
  • Installs easily. Nap grips are replaceable.
No. 523Y
No. 523Y 23" Seammate Repl. Blade
  • Includes three replacement blades for the Crain Seammate doorway seaming tool.
  • Each blade has a 23” long razor sharp edge for scoring the carpet’s backing at the doorway seam location.
  • Marks a straight line on the carpet’s backing which can be trace cut with a knife.
  • Blade dimensions: length: 23.27", width: .560", thickness: .020".
No. 525
No. 525 Wide Knee Kicker
  • Wider head with 4 gripper inserts and an extra row of pins moves more carpet each kick.
  • Extra thick bumper absorbs more impact for comfort.
  • Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
  • Visual pin depth dial provides nine settings for various carpets.
No. 532
No. 532 Topset Gouge
  • Forms a 5/32” wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners.
  • Groove removes excess fullness at the corner that can cause the base to pucker and gap.
  • Grooving depth adjustable using knurled steel nut. Rounded wood handle comfortably fits the palm.
  • Blade is replaceable and resharpenable (No. 533).
No. 533
No. 533 Replacement Blade
  • Includes one each replacement blade only for the Crain No. 532 Topset Gouge.
  • Forms a 5/32” wide groove on the back side of vinyl or rubber cove base.
  • Produces tight-wrapped corners by reducing excess fullness which can cause gaps and puckering.
  • Blade is resharpenable.
No. 535
No. 535 3' Carpet Straight Edge
  • Three foot aluminum straight edge useful for most carpet installation purposes.
  • Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
  • Includes 45° angle on one end, and a hanging hole on the other.
  • Economical and lightweight. Dimensions: 36" long x 2 1/2" wide x 3/16" thick.
No. 536
No. 536 6' Carpet Straight Edge
  • Six foot aluminum straight edge useful for most carpet installation purposes.
  • Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
  • Includes 45° angle on one end, and a hanging hole on the other.
  • Economical and lightweight. Dimensions: 72" long x 2 1/2" wide x 3/16" thick.
No. 543
No. 543 Aviation Snips
  • Top quality compound leverage metal snips great for making straight cuts in aluminum accessory trims.
  • Alloy steel blades make up to 1 11/16” long cuts and provide durability for long term performance.
  • Handles include “soft-touch” grips which reduce twisting in the hand under forceful squeezing.
  • Can cut sheet metal when necessary.
No. 546
No. 546 Wood Roto-Wedge Spacers™
  • Plastic spacers with unique “spiral-wedge” shape which rotates to create a variable gap.
  • Sets a variable gap from 1/16" to 7/8" as needed for a hardwood flooring expansion gap.
  • Spacers adjust on the fly to accommodate walls that are not straight.
  • Sold twelve spacers per pack. Inexpensive and reusable.
No. 553
No. 553 Engineered Wood Stapling Tool
  • Adjustable stapling tool that works close to walls generally within the width of one board.
  • Adjusts to different engineered plank thicknesses from 3/8” to 3/4” with the adjustable foot plate.
  • Insert a staple in the channel and hammer into the subfloor using the unique offset driver.
  • Tool includes separator for separating individual staples. Takes 18 gauge (1/4" crown) staples.
No. 556
No. 556 Carbide-Tipped Blade
  • Replacement carbide-tipped blade for use on Crain No. 545 or No. 555 undercut saws.
  • 36 tooth blade approximately 5 ½” diameter blade.
  • For use cutting wood base, moldings, door jams and drywall only.
  • Not for use in cutting metal, masonry, ceramic tile, or stone.
No. 557
No. 557 Hardwood Pry Bar
  • Bar for wedging bowed planks into position.
  • One end with curved shape and a sharp point is placed against the bowed board.
  • When the opposite end is hammered, a wedging action forces the bowed board in place, closing the gap.
  • Sharp point penetrates wood subfloors cleanly. Long 11” handle provides leverage when needed.
No. 558
No. 558 Staple Set Tool
  • Hand held stapling tool manually drives staples and L-shaped cleats made for ¾” solid hardwood.
  • Finishes off staples and L-shaped cleats after misfires of the nailer.
  • Works in tight areas where nailers don’t fit and is fast for repairs without a compressor.
  • After hammering, sets fasteners flush. Takes 16 GA. ½” crown staples & 16 GA. L-shaped cleats.
No. 559
No. 559 Close to Wall Staple Tool
  • Close to wall stapling tool to manually staple ¾” solid hardwood planks using staples.
  • Normally works within one board width of the wall, reducing gluing or top nailing and puttying.
  • Insert a staple in the channel and hammer it into the wood subfloor using the unique offset driver.
  • Front of tool includes separator to separate individual staples. Takes 16 GA. ½” crown staples.
No. 560
No. 560 Knuckle Head Pull Bar
  • Steel pull bar designed to take heavy hammering when necessary to pull planks together.
  • Boxed “knuckle-shaped” hammering head is welded to the body.
  • 3/16” thick body is made 3” wide to reduce bending down the length as tool is hammered.
  • 16 1/2” long overall for 14 1/2” working room when used near wall. Felt pads reduce scratching.
No. 562
No. 562 Plastic Spacers (10)
  • Maintains expansion gap between the wall and the plank even when the wall is undercut.
  • With the V-shape, one end goes in the gap, and the other braces on the face of the plank.
  • Two ends have different thicknesses, one 3/16” and the other 1/4” for manufacturer’s specifications.
  • Eliminates tipping problems with other spacers. Comes in a pack of 10 spacers.
No. 563
No. 563 Tapping Block
  • Block for tapping and moving planks while also protecting the edges of the plank.
  • Block is sized 3” wide x 7” long x ¾” thick. Bottom is relieved on a side and an end.
  • Put the block on a plank at a relieved edge and it can tap the plank against its outer edge.
  • Reduces risk of chipping the plank. Large plastic handle makes it easy to move and position.
No. 564
No. 564 Variable Wall Spacer
  • Used to space planks from the wall to form the expansion gap necessary with plank floors.
  • Provides variable spacing when the wall adjacent to the planks is not straight.
  • Large threaded pushrod is turned using the oversized ergonomic twist knob.
  • Knob has a steel hex insert for a hex wrench. Pressure pad has rubber insert to protect walls.
No. 565
No. 565 18' Strap Clamp
  • Pulls planks together across lengths of up to 19 feet.
  • Nylon strap coils internally as strap is retracted and stays out of the way.
  • Long base hooks onto planks even under toe spaces.
  • Includes large knob for rapid retraction after clamping is complete.
No. 570
No. 570 Clear Can
  • Great way to store nails and quickly dispense them on the job.
  • Resealable lid is threaded on the clear plastic body and is easily removed to add nails.
  • Squeezing the clear plastic body opens the lid to dispense the right amount of nails.
  • After releasing, lid closes and won’t spill. Lid and bottom made from durable thick ribbed vinyl.
No. 575
No. 575 Multi-Undercut Saw
  • Compact, 7 AMP undercut saw works best for fast undercutting of jambs. Also cuts walls and inside corners.
  • Height of cut adjustable from flush to 1” above floor level. Handle folds for undercutting toe-kicks.
  • Dual-angle depth gauge allows cutting at “straight on” or 45° angles. Maximum depth of cut: 1 1/4".
  • Comes with carbide blade, carrying case, blade wrench, and instructions.
No. 580
No. 580 Aluminum Drives
  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 1/8” hole.
  • Fastener dim.: 1/8” dia. X 5/8” long. Hole: 1/8” dia. x 3/4” deep.
No. 605
No. 605 Deluxe Knee Kicker
  • High profile body more easily spans over stretcher tubes, plus thicker rubber bumper.
  • Recessed trigger provides 5 length settings from 18 ½” to 22 ½”.
  • Visual pin depth dial provides nine depth settings for various carpets.
  • Power rods support the pin plate and improve force transfer to the carpet.
614
No. 614 7" Pad Staple Saver Box
  • Protective plastic box for 7” pad staple boxes.
  • Made from durable telescoping tubes.
  • Detented internal closure mechanism holds the lid on tight.
  • Protects staple boxes. Saving staples saves money!
No. 617
No. 617 Staple Saver Box (5418)
  • Designed specifically to hold Duo-Fast No. 5418 Electric Tacker Staples.
  • Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
  • Protects boxes and staples in the tool box.
  • Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
No. 618
No. 618 Staple Saver Box (7512)
  • Designed specifically to hold Duo-Fast® No. 7512 Hammer Tacker Staples.
  • Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
  • Protects boxes and staples in your tool box.
  • Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
No. 619
No. 619 Shur-Fast® Staples (5M)
  • Unique thermoplastic coating and precision ground “sharp point” (SP) 60° angle points.
  • Efficiently penetrate hardwoods for greater holding power.
  • Preferred for use in Crain electric tackers for reduced misfiring and jamming.
  • 9/16” Leg - 3/16” crown - 20 GA. Shur-Fast® is a registered trademark of the Shur-Fast® corporation.
No. 625
No. 625 Power Tacker
  • Long, slender nose more easily parts yarns and penetrates down to the backing for stapling.
  • Short height, narrow profile, and rounded cap help it get into tight areas.
  • Powerful 11 AMP solenoid drives into hardwoods.
  • Precision magazine opens to expose channel to remove broken staples.
No. 627
No. 627 Carpet Edge Sealing Tip
  • Precision glue tip only for popular glue guns at an upright angle in a convenient pulling motion.
  • Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
  • During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
  • Standard thread (7/16" - 20) fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes.
No. 628
No. 628 1/4" Nozzle
  • 1/4” diameter nozzle with crimped end. Good for seam edge sealing.
  • Thin opening (1/32” high x 7/32” wide) delivers narrow cross section of glue.
  • Works in Crain Nos. 203, 204 or 207 Glue Guns or others with standard thread.
  • Thread size: 7/16" major diameter- 20 threads per inch.
No. 629
No. 629 1/8" Nozzle
  • Extended 1/8” tube (.085” inside diameter) nozzle.
  • Works well for sealing the edges of carpet seams.
  • Works in Crain No. 203, 204 or 207 Glue Guns or others with standard thread.
  • Thread size: 7/16" major diameter- 20 threads per inch.
No. 666
No. 666 Dust Pan
  • Professional grade dust pan stamped from a single sheet of 20 gauge steel.
  • Beveled lip is 12” wide for sweeping in debris.
  • Formed with large corrugated ribs in the pan and at corners for extra stiffness and durability.
  • Painted blade with baked-on enamel finish.
No. 670
No. 670 Hardwood Plank Jack
  • Jack is powered by a threaded pushrod that can produce up to 2000 lbs. of force.
  • It does not have backlash or dog breakage problems associated with dog and ratchet jacks.
  • Turn the ratcheting handle and this jack pushes and holds. Push down on handle to quickly adjust length.
  • Works along walls or fastens down for use in the middle of the room using holes in the base.
No. 673
No. 673 13" Wood Cutter
  • Cuts plank flooring materials up to ¾” thick. Comes fully assembled.
  • Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
  • Includes wheels allowing the cutter to be easily moved from a kneeling position.
  • Movable fence positions planks for straight or 45° diagonal cuts plus cut guide for repeat cuts
No. 675
No. 675 24" Carpet Tile Cutter
  • Cuts carpet tiles, soft vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Works on materials up to ¾” thick.
  • Includes wheels allowing the cutter to be easily moved from a kneeling position.
  • Movable fence and tile guide can be set for repetitive straight or diagonal cuts.
  • Comes fully assembled. Repl. blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 676.
679
No. 679 9" Wood Cutter
  • Cuts plank flooring up to 3/4” thick. Cuts up to 9” wide planks.
  • Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
  • Movable fence positions the material on either side of the blade for increased blade life.
  • Comes fully assembled. Replacement blade: No. 681 9” Wood Cutter Blade.
No. 684
No. 684 Extension Cord
  • 25 foot long 16 gauge 3 conductor grounded extension cord.
  • Constructed for use with power tools indoors or outdoors.
  • Rated for usage up to 13 AMPs at 125 volts.
  • Plug and receptacle are molded on the cordage for durability.
No. 687
No. 687 Stand-Up Carpet Peeler Pin
  • One each steel replacement pin for the No. 686 Stand-Up Carpet Peeler.
  • This pin is driven beneath the carpet and peels it back using the leverage of the tool.
  • Made from hardened steel with sharp point.
  • Easily punctures and gets beneath glued-down carpet.
No. 701
No. 701 4” x 6” Vinyl Blade
  • Hardened, high-carbon steel blade has a 6” long sharpened edge.
  • Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
No. 702D
No. 702D 4” x 6” Double-Edge Vinyl Blade
  • Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
  • Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
No. 703
No. 703 5” x 6” Carpet Blade
  • Hardened, high-carbon steel blade has a 6” long sharpened edge.
  • 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on side only.
No. 704D
No. 704D 5” x 6” Double-Edge Carpet Blade
  • Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
  • 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
No. 705
No. 705 3” x 10” Multi-Purpose Blade
  • Hardened, high-carbon steel blade has a 10” long sharpened edge.
  • Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions 3” tall x 10” wide x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
No. 706D
No. 706D 3” x 10” Double-Edge Multi-Purpose Blade
  • Hardened, high-carbon steel blade has two 10” long sharpened edges, providing double the blade life.
  • Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 3” wide x 10” long x .079 thick. Sharp edge is ground to a 30° bevel on both sides.
No. 707
No. 707 3” x 16” Hard-Set Adhesive Blade
  • Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
  • 3” width produces a stiffer blade for removing hard-setting adhesive residues.
  • Good for removing epoxy adhesives, thin-set mortar, or cement-based patch.
  • Dimensions: 3” tall x 16” wide x .079” thick. Sharp edge ground to 30° bevel on one side only.
No. 708
No. 708 5” x 16” Soft-Set Adhesive Blade
  • Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
  • 5” width produces a blade with more flex for removing soft-setting adhesive residue.
  • Good for removing latex or urethane-based adhesives, or gypsum-based patch.
  • Dimensions: 5” wide x 16” long x .079” thick. Sharp edge ground to 30° bevel on one side only.
No. 710
No. 710 Power Stripper
  • Power Channel construction produces forward stripping blade motion with more focused energy.
  • Cam action of the 1 HP motor is channeled straight ahead using steel channels and ball bearings.
  • Blade carrier forms ultra-low blade angle allowing the blade to get beneath the material to be removed.
  • Includes 5 1/2” x 3 1/8” x 1/4” Spud Blade for light tile and wood removal, 3” x 10” multi blade, and 35 lb. weight.
No. 711
No. 711 Spud Blade
  • Heavy-duty extra-thick stripper blade for removal of ceramic tile or wood floors.
  • Narrow 3 1/8” ground edge takes up narrow sections as is often required on wood floor takeup.
  • Long 5 1/2” body provides reach to prevent the blade carrier from contacting surrounding material.
  • For use on the Crain No. 710 Power Stripper only. Dimensions: Length: 5 1/2" x Width: 3 1/8" x 1/4" thick.
No. 712
No. 712 #12 Open End Thimble, Small
  • English size #12 (U.S.A. size #0) small open-end sewing thimble.
  • Works well on small-sized fingers.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the finger and exposes fingertip for gripping.
No. 713
No. 713 #13 Open End Thimble, Medium
  • English size #13 (U.S.A. size #00) medium open-end sewing thimble.
  • Works well on medium-sized fingers.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the finger and exposes fingertip for gripping.
No. 714
No. 714 #14 Open End Thimble, Large
  • English size #14 large open-end sewing thimble.
  • Works well on large-sized fingers.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the finger and exposes fingertip for gripping.
No. 715
No. 715 #00 Open End Thimble, Thumb
  • Extra-large open-end sewing thimble.
  • Works well on the thumb.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the thumb and exposes the end of the thumb for gripping.
No. 720
No. 720 Hinged Carpet Knife
  • Slim body hinges open for access to blade storage.
  • Takes slotted razor blades.
  • Body includes knurling on both sides for improved grip.
  • Fin behind the blade carrier for thumb pressure improves control.
No. 725
No. 725 Deluxe Carpet Knife
  • Slotted razor blade carpet knife with rear-loading magazine for quick access to blades.
  • Loosen the folding thumbscrew to release the magazine.
  • Wide contours for more open, less constricted ergonomic grip.
  • Precision blade holder holds blades tight at varying blade extension when needed.
No. 726
No. 726 Pivoting Carpet Knife
  • Slotted razor blade carpet knife pivots open for quick access to blades.
  • Loosen folding thumbscrew, and the knife pivots open.
  • Knife body features wide contours for more open, less constricted ergonomic grip.
  • Precision blade holder holds blades tight at varying blade extension when needed.
No. 727
No. 727 Delphin Knife
  • Utility or hook blade knife with hinged body that opens rapidly using large thumbwheel.
  • Body can be opened by rolling the wheel across a surface for access to blade storage.
  • Contoured for enhanced grip with precision blade holder to hold blades tight.
  • Comes with plastic blade carrier that fits inside a pocket.
No. 728
No. 728 Pocket Utility Knife
  • A utility blade knife that folds for storage in your pocket.
  • Durable blade holder locks rigidly.
  • When opened, body locks rigidly and reliably.
  • Body is contoured for gripping and includes a blade storage compartment.
No. 730
No. 730 Utility Knife
  • Classic utility or hook blade knife with knurled body for solid grip.
  • Compact design and precision blade holder for detailed cutting in sheet vinyl materials.
  • Pivots open for blade storage using the folding thumbscrew.
  • Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook).
No. 732
No. 732 Extra-Grip Utility Knife
  • More knurling up front plus finger contours for better grip and precise cutting.
  • Pivots open quickly for blade storage by loosening the folding thumbscrew.
  • Replacement blades are easily removed by a teeter-totter action generated by internal ridges.
  • Precision blade clamp with magnet takes hook or utility blades.

Pages