Product List

No. 732
No. 732 Extra-Grip Utility Knife
  • More knurling up front plus finger contours for better grip and precise cutting.
  • Pivots open quickly for blade storage by loosening the folding thumbscrew.
  • Replacement blades are easily removed by a teeter-totter action generated by internal ridges.
  • Precision blade clamp with magnet takes hook or utility blades.
No. 733
No. 733 Extra-Grip Razor Knife
  • Slim profile and heavy knurling on the body and up front provide better grip for precise cutting.
  • Precision blade clamp with magnet takes standard slotted razor blades (Crain No. 308C).
  • Extra blades are easily retrieved from storage in the body by loosening the folding thumbscrew and pivoting open.
  • Blades are easily removed by a teeter totter action generated by internal ridges.
No. 735
No. 735 Carpet Pad Knife
  • Relieved blade holder exposes a longer cutting surface of the slotted razor blade.
  • Cuts thick carpet pad more efficiently.
  • Handle is angled upward to prevent dragging of the knuckles on the pad.
  • Body pivots open for blade storage by loosening the folding thumbscrew.
No. 745
No. 745 Deluxe 750° Heat Gun
  • Flameless electric heat gun producing hot air up to 750°F for softening, forming and cutting sheet vinyl and VCT.
  • Adjustable intake cover adjusts temperature from 500°F - 750°F. Fan output is 27 CFM.
  • 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
  • Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
No. 745K
No. 745K Deluxe Gun Universal Case
  • Carrying case only for Crain No. 745 and No. 995 Deluxe Heat Guns.
  • Also holds all previous Nos. 740 & 990 Crain Deluxe heat guns (red aluminum housing).
  • Custom formed interior supports and protects the heat gun in transportation and storage.
  • Made with dual latches, piano-style hinges, and recessed handle for durability.
No. 751
No. 751 Thriftline Heat Blo Gun
  • Inexpensive 1200 watt heat gun produces adjustable hot air from 250° - 1000°F.
  • Temperature is adjustable by turning a large knob at the back of the gun.
  • Three-position switch controls the power and amount of air output at high, low or power off.
  • Pistol-grip handle is designed to stand the gun upright to prevent damaging the floor.
No. 760
No. 760 Right-Handed Sewing Palm
  • Rawhide leather bound sewing palm includes sewn-on iron thimble.
  • Puts the force of the palm behind the needle to push through tough backings.
  • Sewn-on thimble includes coarse grate for directing the needle.
  • Designed for right-hand usage only.
No. 761
No. 761 2 1/8" Long Needles
  • 21/8 inch long, 16 gauge straight sewing needles.
  • Made especially for carpet seaming.
  • Rounded on the eyelet end, sharp on the other.
  • Sold in pack of 25 needles only.
No. 762
No. 762 3" Long Needles
  • 3 inch long, 16 gauge straight sewing needles.
  • Made especially for carpet seaming.
  • Rounded on the eyelet end, sharp on the other.
  • Sold in pack of 25 needles only.
No. 765
No. 765 4" Curved Needles
  • 4 inch, 17 gauge curved sewing needles.
  • Sometimes called “mattress needles”, but also good for sewing carpet.
  • Rounded on the eyelet end, sharp on the other.
  • Sold in pack of 12 needles only.
No. 769
No. 769 Economy Polyester Thread
  • Three ply waxed 100% polyester hand stitching thread.
  • Color is natural (beige) similar to the color of carpet backing.
  • Wax coating passes smoothly through the material being sewn.
  • Stretches more than linen thread, which may show more seam when used for that purpose.
No. 771
No. 771 Natural Waxed Linen Thread
  • Waxed three cord natural linen thread.
  • Wax coating helps thread pass smoothly through the carpet being sewn.
  • Color is natural (beige) similar to the color of the carpet’s backing.
  • Works well for hand sewing carpets including seams.
No. 775
No. 775 Toe-Kick Saw
  • Extended spindle, low profile head, and flush-mounted blade cuts up to inner wall of a toe-kick.
  • Cuts wood to fixed depth of 3/4” using the 3 3/8” dia. 18 tooth carbide blade (No. 787 - included).
  • Cuts ceramic tile, brick, stone or grout to depth of 3/8” with diamond blade (No. 788 – not included).
  • Saw includes clutch that may disengage if abused by cutting backwards or cutting curves.
No. 780
No. 780 Aluminum Drives
  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 1/8” hole.
  • Fastener dim.: 1/8” dia. X 7/8” long. Hole: 1/8” dia. x 1” deep.
No. 783
No. 783 Aluminum Drives
  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 3/16” hole.
  • Fastener dim.: 3/16” dia. X 7/8” long. Hole: 3/16” dia. x 1” deep.
No. 787
No. 787 Carbide-Tipped Blade
  • Replacement carbide-tipped blade for Crain Model No. 775, 785 or No. 795 Toe-Kick Saws.
  • 3 3/8” diameter with 18 carbide teeth and precision countersunk arbor to flush mount blade screw.
  • Cuts to fixed depth of 3/4” using the saw.
  • For cutting wood only. Do not use on any metal, ceramic tile, brick, or stone materials.
No. 788
No. 788 2 3/4" Toe-Kick Saw Blade
  • 2 3/4” diameter carbide-tipped blade for use on Crain No. 785 and No. 795 Toe-Kick Saws only.
  • When used on these saws, it cuts to a shallower fixed depth of 3/8”. For cutting wood only.
  • 16 carbide teeth, countersunk arbor for flush mounting the blade screw, and two drive holes.
  • Not for use on Model No. 775 Toe-Kick Saw. Don’t use on metal, ceramic tile, concrete or stone.
No. 789
No. 789 2 5/8" Toe-Kick Diamond Blade
  • Accessory diamond blade for use on Crain Model No. 775, No. 785, or No. 795 Toe-Kick Saws.
  • 2 5/8” diameter continuous rim diamond dry cutting blade for cutting ceramic tile or removing grout.
  • Cuts to fixed depth of 3/8” using the saw.
  • For use on ceramic tile, brick, concrete, stone, or removing grout only. Not for use on metals.
No. 803
No. 803 Combination Blade
  • Economical steel-toothed blade for discontinued Crain Model Nos. 800 and 810 Super Saws.
  • Includes 100 steel teeth.
  • Arbor hole countersunk for flush mounting blade screw. Body has 2 drive holes for blade driver.
  • For use on wood or dry wall only. Do not use on any metal, ceramic tile, concrete or stone.
No. 804
No. 804 Carbide Blade
  • Carbide-tipped blade for use on discontinued Model Nos. 800 and 810 Super Saws.
  • Blade has 40 carbide teeth for a smooth cut and long blade life. For use on wood or dry wall only.
  • Arbor hole countersunk for flush mounting blade screw. Body has two holes for blade driver.
  • For cutting wood or dry wall only. Do not use on any metal, ceramic tile, concrete, or stone.
No. 805
No. 805 Masonry Blade
  • Replacement 6 ½” diameter masonry blade for Crain No. 800, 810, 812, 820 and 825 undercut saws.
  • Dry cutting composition blade for undercutting masonry walls or hearths.
  • Produces seven to ten feet of undercutting depending on material and depth of cut.
  • For use in undercutting masonry materials only. Not for use on any kind of metal.
No. 812
No. 812 Super Saw
  • Powerful 13 AMP motor and compact design that can operate in tight areas like closets or pantries.
  • Undercuts doors in place, inside corners, and masonry walls and hearths up to 1 ¾” deep and 1” high.
  • Diamond blade available as accessory for undercutting tile and stone walls (No. 822).
  • Vacuum fitting for dust collection. Comes with case, carbide blade, and masonry blade.
No. 821
No. 821 Carbide-Tipped Blade
  • Carbide-tipped replacement blade for Crain No. 812 Super Saw or No. 825 Heavy-Duty Undercut Saw.
  • Large 6 ½” diameter blade can fully undercut inside corner areas.
  • 40 carbide teeth and precision-formed steel body produces smooth, accurate cuts.
  • Not for use on any metal, masonry, stone, or ceramic tile materials.
No. 821
No. 821 Carbide-Tipped Blade
  • Carbide-tipped replacement blade for Crain No. 812 Super Saw or No. 825 Heavy-Duty Undercut Saw.
  • Large 6 ½” diameter blade can fully undercut inside corner areas.
  • 40 carbide teeth and precision-formed steel body produces smooth, accurate cuts.
  • Not for use on any metal, masonry, stone, or ceramic tile materials.
No. 822
No. 822 Diamond Undercut Blade
  • Accessory 6 ½” diamond blade for the Crain No. 812, No. 820, or No. 825 undercut saws.
  • Dry-cutting segmented abrasive cutting diamond blade.
  • Provides superior blade life cutting masonry, ceramic tile, or stone.
  • Not for use on any metal or wood materials.
No. 825
No. 825 Heavy-Duty Undercut Saw
  • Undercuts doors in place, inside corners, and masonry walls and hearths. Vacuum fitting for dust collection.
  • Diamond blade available as accessory for undercutting tile and stone walls (No. 822).
  • Dual lead screws provide slip proof height adjustment. Aluminum ratchet handle is highly durable.
  • Powerful 8.15 AMP motor is geared for more torque at lower RPM and less dust. Comes with carrying case.
No. 844
No. 844 Pulling Claw
  • The pulling claw features a compound leverage jaw and large contoured handle.
  • Works great for pulling up glued-down flooring materials. Withstands heavy hand pulling.
  • Spring-loaded jaw opens automatically to insert an edge of the material. Just insert material and pull.
  • The harder you pull, the harder the roller activated upper jaw clamps on the material.
No. 845
No. 845 Metal Mitre Handle
  • Handle assembly only for family of Metal Mitre interchangeable die sets used to make corners in cap metal.
  • Compound leverage handle generates enough force to punch notched shapes out of aluminum cap.
  • Die sets fasten onto the cast iron die holder with two fasteners. No die set is included.
  • Accepts these die sets: No. 846, No. 848, No. 850, or as replacement handle for No. 870 Vinyl Notcher.
No. 846
No. 846 Die Set
  • Interchangeable Metal Mitre die set only with thick .135” punch for heavier carpet or wall board cap.
  • Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
  • NOTE: this punch is too thick to enter the narrow channels of laminate and vinyl cap metal.
  • For use on aluminum cap metal only. Repl. punch: 1846-A. No handle is included with this die set.
No. 847
No. 847 Die Set w/Handle
  • Combo including a handle and die set with thick .135” punch for heavy carpet or wall board cap.
  • Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
  • Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
  • NOTE: punch for this combo is too thick to enter the narrow channels of laminate and vinyl cap metal.
No. 848
No. 848 Die Set
  • Interchangeable die set only with .090” thick punch for most vinyl and carpet cap with at least 3/32” opening.
  • Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
  • Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
  • For use on aluminum cap metal only. Repl. punch: 1848-A. No handle is included with this die set.
No. 849
No. 849 Die Set w/Handle
  • Combo including a handle and die set with relieved .090” thick punch for most vinyl and carpet cap.
  • Works on cap metals with at least 3/32” opening. For use on aluminum cap metals only.
  • Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
  • Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
No. 850
No. 850 Die Set
  • Interchangeable die set only with .050” thick punch for vinyl and laminate cap with at least 1/16” opening.
  • Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
  • Slender punch for narrow channels. Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
  • For use on aluminum cap metal only. Repl. punch: 1850-A. No handle is included with this die set.
No. 851
No. 851 Die Set w/Handle
  • Combo including a handle and die set with slender .050” thick punch for most vinyl and laminate cap.
  • Slender punch works on cap metals with at least 1/16” opening. For use on aluminum cap only.
  • Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
  • Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
No. 855
No. 855 Wood Miter
  • Makes fast angle cuts in quarter round, eliminating need for a chop saw.
  • Stout 2 ½” long high carbon steel blade is strong enough and sharp enough to shear cut wood.
  • Table includes gauge for making 22.5° angle cuts for "soft corners" and 45° angle for square corners.
  • Extra-long vinyl coated handles provide adequate leverage for cutting.
No. 856
No. 856 Wood Mitre Replacement Blade
  • One each replacement blade for No. 855 Wood Miter that makes angle cuts in wood quarter round.
  • Stout 2 ½” long blade.
  • Sharp enough and strong enough to shear cut wood materials cleanly.
  • Blade is made from high carbon steel for long life.
No. 870
No. 870 Die Set w/Handle
  • Specialty combo handle and die set with heavy .156” thick punch for use on vinyl T-moldings only.
  • Quickly cuts out a relief notch from the insert of the T-molding with 1/4” bottom and 45° side angles.
  • After relief notch is removed, the T-molding easily forms tight radius bends, such as for corners.
  • Sold as combo handle and die set only. Die Set for No. 870 is not sold separately.
No. 880
No. 880 Vinyl Mitre
  • Makes clean, ultra-straight cuts in vinyl trims much faster than with a knife.
  • Cut pieces come together perfectly to form more attractive corners.
  • Tool includes a gauge for cutting the trim at a 45° angle to form a corner, or straight for butt cuts.
  • Razor sharp blade is replaceable (No. 881).
No. 881
No. 881 Replacement Blades (3)
  • Pack of 3 replacement blades for the No. 880 Vinyl Mitre.
  • Blades create 45° cuts in vinyl trims for more attractive corners.
  • Razor-sharp edges make clean, accurate cuts in the trim so that cut pieces come together perfectly.
  • Comes in a plastic box that snaps closed for storage.
No. 898
No. 898 Combo Case
  • All-steel case for carrying and protection 3 or 6 inch irons.
  • Inner partition for a roll of tape and space to loosely lay the iron cord.
  • Case top is connected by piano-style hinge, and includes plated steel folding handle.
  • Includes heavy-duty latch with lockable hasp.
No. 903
No. 903 3" Universal Iron Tray
  • Holds Crain 3 inch irons.
  • Holds other popular 3 inch irons.
  • Spring clips are riveted to the tray for durability.
  • Durable all-steel construction with angled clips for hands-free reinsertion of the iron.
No. 905
No. 905 Heat Bond Iron
  • Ultra-low profile and narrow handle make it easier to bring the seam together.
  • Dual indicator lights show power-on and heating status.
  • Rotating 12’ HSJO cord assembly with flexible strain relief improves cord life.
  • Base includes non-stick coating. Includes durable riveted iron tray.
No. 906
No. 906 Heat Bond Iron Kit
  • Includes No. 905 iron, 25 foot extension cord, and steel case.
  • Case holds the iron plus a spare roll of seam tape.
  • Case is made with a durable, smooth-acting piano-style hinge.
  • Case is made with a plated steel handle and lockable hasp for security.
No. 910
No. 910 Sharpening Stone
  • Works well for resharpening curved carpet and vinyl knives.
  • Medium Crystolon silicon carbide grit.
  • Sized 1 1/4" wide by 10" long x 3/4" thick.
  • No handle is included with this stone.
No. 912
No. 912 12” x 8” Steel Square
  • An 8” x 12” steel square that’s useful for patterned vinyl flooring layout work.
  • Legs include rulers on front and back marked in 1/16” graduations.
  • Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
  • Dimensions - body: 12" long x 1 1/2" wide, tongue: 8" long x 1" wide.
No. 915
No. 915 24” x 16” Steel Square
  • 24” x 16” steel square that’s useful for patterned vinyl flooring layout work.
  • Legs include rulers on front and back marked in 1/8” graduations.
  • Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
  • Dimensions - body: 24" long x 2" wide, tongue: 16" long x 1 1/2".
No. 930
No. 930 Laminated Sharpening Stone
  • Works well for resharpening curved carpet and vinyl knives with resharpenable blades.
  • Made from Crystolon silicon carbide.
  • Grit is coarse on one side, fine on the other.
  • Stone size: 1 1/4" wide by 10" long x 3/4" thick. Handle length: 4 3/4" long.
    Handle diameter: 1 1/8" dia.
No. 945
No. 945 Electronic Heat Bond Iron
  • Precision electronic thermostat maintains set temperatures +/- 15°F ranging from 240 to 420°F.
  • Provides consistent heat and uniform melting.
  • Ultra-low profile base makes it easier to bring the seam together.
  • Rotating 12 ft. HSJO cord with flexible strain relief extending cord out of the seam area.
No. 946
No. 946 Electronic Iron Kit
  • Includes No. 945 Electronic Heat Bond Iron, 25 foot extension cord, and steel case.
  • Case holds the iron plus a spare roll of seam tape.
  • Case is made with a durable, smooth-acting piano-style hinge.
  • Case is made with a plated steel handle and lockable hasp for security.
No. 950
No. 950 Professional Installers Tool Kit
  • Provides basic tools of carpet installation, including:
  • 24” tool box, knee kicker, wall trimmer, cushion back cutter
  • strip cutter, tool pouch, chalk line & chalk, seam sealer bottle
  • razor & utility knives, molding lifter, hammer, stair tool, and
    nap shears.
No. 955
No. 955 Pull Hand Groover
  • Cuts a U-shaped groove at the seam line for welding using a pulling action.
  • Makes starter grooves for a power groover. Grooves in tight areas and places floors aren’t level.
  • Adjustable fin tracks in the seam line and controls grooving depth, permitting faster work.
  • Comes with 3 blades, one pre-loaded in the tool, and two stored in the handle.
No. 956
No. 956 Pull Hand Groover Blades (3)
  • Pack of three U-shaped replacement blades for the Crain No. 955 Pull Hand Groover.
  • Precision formed from high carbon steel, heat treated, and hand sharpened.
  • Locator hole above screw hole keeps blade rigidly in place on Crain No. 955 groover.
  • Standard shape fits other popular hand groovers.
No. 960
No. 960 Heat Weld Gun
  • Provides electronic control of both temperature and airflow using separate sliding controls.
  • Temperature and airflow are continuously adjustable up to 1250°F and 15.4 CFM.
  • Includes precise fitting pencil tip nozzle.
  • Includes triangular speed welding tip, round speed welding tip, and detailed instructions.
No. 961
No. 961 Triangular Welding Tip
  • Triangular speed welding tip for the Crain No. 960 Heat Weld Gun.
  • For use with triangular or “half moon” welding rod.
  • Air outlet is precisely formed to focus hot air over the seam area.
  • Standard sized inlet diameter fits the pencil tip nozzle outlet of popular heat weld guns.
No. 962
No. 962 Round Welding Tip
  • Round speed welding tip for the Crain No. 960 Heat Weld Gun.
  • For use with round 4 mm welding rod.
  • Air outlet is precisely formed to focus hot air over the seam area.
  • Standard sized inlet diameter fits the pencil tip nozzle outlet of most other popular heat weld guns.
No. 963
No. 963 Pencil-Tip Nozzle
  • Adapts our No. 960 Heat Weld Gun to our No. 961 Triangular or No. 962 Round Welding Tips.
  • Angled outlet is convenient for holding the heat gun and keeping the speed tip on the rod.
  • Useful in areas where speed tips can’t go such as coved areas.
  • Standard diameter inlet and outlet outlet fits most popular heat weld guns and speed tips.
No. 965
No. 965 Skiving Knife w/Blade
  • Trims excess heat welding rod at the seam without gouging high spots.
  • Includes sharp, flexible blade that is replaceable and built-in pivoting trim guide.
  • On first pass, trim with guide under the blade, then pivot guide out and trim second pass.
  • Eliminates difficult resharpening of quarter moon knives and gouging high spots.
No. 966
No. 966 Skiving Knife Repl. Blade
  • One each replacement blade for the No. 965 Skiving Knife.
  • Blade is flexible to eliminate gouging of high spots.
  • Blade is replaceable to eliminate difficult resharpening of quarter moon knives.
  • Used for trimming excess heat welding rod at the seam areas.
No. 967
No. 967 Skiving Knife Repl. Blades (5)
  • Pack of five replacement blades for the No. 965 Skiving Knife.
  • Blades are flexible to eliminate gouging of high spots.
  • Blades are replaceable to eliminate difficult resharpening of quarter moon knives.
  • Used for trimming excess heat welding rod at the seam areas.
No. 969
No. 969 Heat Weld Gun
  • Comes with a Leister Triac ST heat gun for consistent and reliable heat output.
  • A single dial on the back of the heat gun controls temperature from 104° - 1290°F.
  • Standard 1 1/4” air outlet fits a wide variety of nozzles.
  • Comes with pencil tip nozzle, triangular welding tip, round welding tip, and carrying case.
No. 970
No. 970 Power Groover
  • Power groover with seam tracking wheels following the seamline to cut a diagonal groove.
  • Simple depth control knob is labelled in increments of 1/10 of a millimeter.
  • More chips are collected in the dust bag due to optimized direction of airflow.
  • Comes with 12 tooth 130 mm carbide tipped blade (No. 971) and metal carrying case.
No. 971
No. 971 12 Tooth Carbide Blade
  • Replacement carbide tipped blade for the Crain No. 970 Power Groover.
  • 12 tooth 130 mm blade works on other groovers that take this size blade.
  • Cuts a trapezoidal shaped groove in the material. Blade is resharpenable.
  • Not for use on metal impregnated safety floors (see No. 972 Diamond Groover Blade).
No. 972
No. 972 Diamond Groover Blade
  • Heavy grit diamond abrasive blade for the Crain No. 970 Power Groover.
  • Use on metal impregnated safety floors only. Makes an approx. 3.4 mm wide groove.
  • Continuous rim diamond grit brazed on the entire outside diameter.
  • 130 mm diameter works on other groovers that take this sized blade.
No. 979
No. 979 Universal Welding Tip
  • Versatile tip works with 3 mm round, 5 mm round, half-moon, or triangular welding rod.
  • Adjusting screw at the rod inlet adapts the inlet to the various rod shapes.
  • Grooved brass pressure roller is also adaptable to the various rod shapes.
  • Hot air inlet is sized to fit the Crain No. 960 or No. 980 Heat Weld Guns, and other popular models.
No. 984
No. 984 Hand Groover Repl. Blades (10)
  • Pack of ten replacement blades for the No. 983 Hand Groover.
  • Blades form a U-shaped groove at the seamline for welding.
  • Blades have U-shaped edges ground on two sides.
  • Blades come in a plastic box with a lid that snaps shut for storage.
No. 985
No. 985 Quarter Moon Knife
  • Trims excess welding rod from the seam area after cooling making it flush with the floor.
  • Used in a two-step trimming process with the No. 986 Trim Guide.
  • Use the trim guide under the blade on first pass, then remove the trim guide on second pass.
  • Knife is resharpenable and comes with protective pouch.
No. 986
No. 986 Trim Guide
  • Depth control guide for the No. 985 Quarter Moon Knife.
  • Used with the knife to trim excess welding rod in a two-step process.
  • Insert guide under the knife to remove the bulk of the material on a first pass.
  • Remove guide on second pass and the knife trims the remaining excess flush to surrounding floor.
No. 987
No. 987 Pressure Roller
  • Used for welding areas where a speed tip does not work well such coved areas.
  • Welding rod is threaded through the hollow handle and put under the roller.
  • Roller has a grove for guiding and pressure the welding rod into the seam.
  • As the roller presses and holds the rod, a heat gun with pencil-tip nozzle welds it.
No. 988
No. 988 Vinyl Welding Kit
  • A kit of the basic tools needed for vinyl welding at a great price!
  • Includes: Leister Triac ST heat gun, pencil tip nozzle, triangular tip and round tip.
  • Also includes: power groover, pull hand groover, quarter moon knife, and trim guide.
  • Includes metal carrying case that holds all the tools.
No. 995
No. 995 Deluxe 1000° Heat Gun
  • Flameless electric heat gun producing hot air up to 1000°F for softening, forming and cutting sheet vinyl and VCT.
  • Adjustable intake cover adjusts temperature from 750°F - 1000°F. Fan output is 27 CFM.
  • 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
  • Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
No. 996X
No. 996X Hook Blades (15)
  • Pack of 15 high-quality German-made hook blades. Hook shape good for cutting over concrete.
  • Very good for following score lines on linoleum and making long rough cuts in sheet vinyl.
  • The blades come in a plastic box with a hinged lid that snaps closed for storage.
  • Usable with most utility knives and Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.
No. 997
No. 997 Personna® Deep Hook Blades (10)
  • Pack of 10 Personna® deep hook blades. These blades can be used in most utility knives.
  • Hook blades keep the cutting edge off the floor when cutting concrete.
  • Hook blades also good for following score lines in linoleum and making long rough cuts in sheet vinyl.
  • Blade dim.: length: 2.0", width: .75", thickness: .025". Use in Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.

Pages