Page 27 - crain-catalog-flip-2023

No. 562 Plastic Spacers (10)
These spacers maintain a proper size gap even when the adjacent wall is undercut. The V-shape rests against the face of the plank to prevent the spacer from tipping. The two ends have dif- ferent thicknesses, one at 3/16" and the other at 1/4", for various manufacturer’s specifications. Order No. Description
562 Plastic Spacers
Crain Tapping Blocks
Weight
5.28 oz.
No. 562
No. 563 7 inch
No. 569 113⁄4 inch
No. 576 No. 560
No. 285
No. 288
Made in two sizes from 3⁄4" thick solid plastic blocks. Both have relieved edges on a side and an end. Used to tap the side of the plank to fit the tongue and groove.
Order No.
563 569
Description
7" Tapping Block 113⁄4" Tapping Block
Weight
9 oz. 1 lb.
No. 576 LVP Angle Tapping Block
Lifts the LVP plank to the angle where it can be tapped and locked tight. Large upper plastic block contacts just below the face of the plank, while a lower plastic contact plate slides to contact the core. Comes with three 1mm shims and two 3mm shims. Works on planks and tiles up to 10mm thick. Shims sold separately for thicker LVP/LVT.
Order No.
576
577
578
579
Description Weight
LVP Angle Tapping Block 1mm Shim for LVP Block 3mm Shim for LVP Block Contact Plate for LVP Block
1 lb. 13 oz. 1 oz.
2 oz. 1 oz.
No. 560 “Knuckle Head” Pull Bar
This pull bar features a boxed “knuckle” hammering head that is welded to the body. The width has been increased to reduce body bending, and the length is increased for more working room at the wall.
LVP TAPPING BLOCK
BOXED & WELDED HAMMERING HEAD
SCORE LVP
Order No. Description
560 "Knuckle Head" Pull Bar
No. 285 LVP Scoring Knife
Weight
3.25 lb.
The 45° blade angle of this knife is optimal for scoring and breaking rigid core LVP/LVT. The wide beveled edge on the blades score the plank smoothly and reduce resistance. The elevated handle provides knuckle clearance. Extra blades are stored in the handle. Replacement blades: Crain No. 286C (100 pack) or No. 287 (10 pack).
Order No. Description Weight Blades
285 LVP Scoring Knife 9.3 oz. 286C, 287
No. 288 Hook Handle LVP Scoring Knife
The 45° blade angle of this knife is optimal for scoring and breaking rigid core LVP and LVT. The wide beveled edge on the blades score the plank smoothly and reduce resistance. The elevated handle provides knuckle clear- ance. Reversible blade holder takes LVP/LVT scoring blades or standard utility/hook blades. Blades can be stored in the handle.
Order No. Description Weight Blades
SCORING BLADES: No. 286C (100)
No. 287 (10)
REVERSIBLE BLADE HOLDER
288 Hook Handle LVP Knife 5.8 oz. 286C, 287
CUT VINYL & LINOLEUM
Plank Floor Tools 26