Page 29 - crain-catalog-flip-2023

No. 336 Undercut Saw & Blades
This saw has a trapezoid-shaped high-carbon replace- able steel blade, with a 12" row of 10-point teeth on both sides. Perfect for undercutting door jambs and obstacles. Order No. Description Weight Blade / Wt.
336 Undercut Saw 1 lb. 335 / 8 oz.
No. 157 Crain Moulding Lifter
This steel pry bar is designed to get behind wood base and moldings and pry them off with a minimum of damage. Both the rocker and flat ends have slim, wide- profile prying surfaces that are polished smooth for safer insertion behind the base. Both ends also have sharp, beveled nail slots with internal webbing shaped especially for taking up small headed nails, brads, and staples often used on moldings.
No. 336
No. 157
Order No. Description
157 Crain Moulding Lifter
No. 159 Vaughan Superbar
Weight
8 oz.
The Vaughan 15" Superbar is the classic heavy-duty pry bar. Features a fully rounded "shepherd's crook" rocker end for maximum prying power, and a flat end for getting under nails and scraping. Includes three beveled nail slots. Both ends are polished for insertion behind moldings and base when used as a molding lifter.
Order No. Description Length Weight
159 Vaughan Superbar 15" 24 oz.
No. 356 Carbide Hole Saw
This tungsten carbide hole saw cuts clean 13/8" holes for pipe clearance. The replaceable 1/4" masonry bit holds a center. An internal spring ejects the piece cut out. Works well on ceramic and soft-bodied quarry tile.
Order No. Description Weight
356 Crain Ceramic Hole Saw 10 oz.
No. 684 Extension Cord
This 25 foot long 16 gauge 3 conductor grounded exten- sion cord is constructed for use with power tools indoors or outdoors. Plug and receptacle are molded on the cord. Order No. Description Max. Amp. Weight
684 25 ft. Extension Cord 13 2 lbs.
No. 353 Carbide Grout Saw
This hand saw is used for removing old or damaged grout. Comes with one carbide blade coated with carbide grit for cutting out grout between tiles, and one steel-toothed blade for heavy cleanout work after using the carbide blade. The steel-toothed blade can be used in combination with the carbide blade for wider grout joints or to protect walls when working up close to a wall. Minimum grout joint width: 1/8”. Replacement blades: No. 353Y.
Order No. Description Weight Blade / Wt.
353 Grout Saw (w/2 blades) 4 oz. 353Y / 1/2 oz.
No. 081 “GritEdge” Rod Saw Blades
Remington tungsten-carbide rod saw blades have a fine grit edge that is perfect for cutting ceramic and laminates. Makes cutting angles and curves easy.
Order No. Description Length Weight
No. 159
No. 356
No. 684
No. 353Y
081 Rod Saw Blade 10" 0.5 oz.
No. 353
No. 081
Other Tools 28