No. 235 6″ Disposable Cove Base Nozzle

These inexpensive 6″ disposable cove nozzles fit over the applicator tip of common base adhesive cartridges. They evenly spread five beads of adhesive for optimal application onto 6″ wide cove base. The five holes are spaced to apply adhesive so that adhesion is maximized and overflow from the edges of the base is minimized. The hole diameters are sized to ensure that an equal amount of glue is dispensed from each hole. The end flange fits behind the nozzle slot of most popular guns and prevents the nozzle from coming off the cartridge tip. Includes one each disposable nozzle. Net weight: 1 oz.

No. 236 3″ Disposable Cove Base Nozzle

These inexpensive 3″ disposable cove nozzles fit over the applicator tip of common base adhesive cartridges. They evenly spread three beads of adhesive for optimal application onto 3″ wide cove base. The three holes are spaced to apply adhesive so that adhesion is maximized and overflow from the edges of the base is minimized. The hole diameters are sized to ensure that an equal amount of glue is dispensed from each hole. The end flange fits behind the nozzle slot of most popular guns and prevents the nozzle from coming off the cartridge tip. Includes one each disposable nozzle. Net weight: 1 oz.

No. 237 Quart Cove Base Gun

This gun takes standard quart cove base adhesive cartridges. The smooth pushrod delivers continuous feed and pressure. Rod pressure is released for reloading or for stopping the flow using an easy-access thumb lever. A handy cutter is built in to the handle to cut the end off the plastic tip of the cartridge. A riveted 5 ½” long needle pivots out from the body to break the cartridge seal through the tip of the cartridge. Durable and economical all-steel construction. Includes gun only – no adhesive cartridge is included. Net weight 2 ½ lbs.

No. 238 1/10 Gallon Cove Base Gun

This gun takes standard 1/10 gallon cove base adhesive cartridges. The smooth pushrod delivers continuous feed and pressure. Rod pressure is released for reloading or for stopping the flow using an easy-access thumb lever. Durable and economical all-steel construction. Includes gun only – no adhesive cartridge is included. Net weight 1 1/4 lbs.

No. 530 Rubber Base Gouge

This tool for gouging out the back of rubber or vinyl base for tightly-wrapped corners comes with a double-tipped blade. The V-tip makes a sharp V-shaped groove that conforms better to tightly formed sheetrock corners. The U-Tip makes a wider U-shaped groove for fuller corners, or for tougher base where a wider groove must be made. The depth gauge adjusts using a simple set screw.

No. 531 Gouge Replacement Blade

This is a double-tipped replacement blade only for the No. 530 Rubber Base Gouge. It gouges out the back side of the cove base to produce tight wrapped corners. It includes a V-tip for tight corners where a sharp 90° groove works best, and a U-tip for fuller corners. The blade is reversible and conveniently sockets into the handle.

No. 532 Topset Gouge

The topset gouge forms a 5/32” wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners. The groove removes excess fullness at the corner that can cause the base to pucker and form gaps from the wall. Grooving depth is adjustable using the knurled steel nut. Wood handle is rounded to fit the palm comfortably. Blade is replaceable and resharpenable (No. 533). Net weight: 3 oz.

No. 533 Replacement Blade

Includes one each replacement blade only for the Crain No. 532 Topset Gouge used to form a 5/32” wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners. The groove removes excess fullness at the corner that can cause the base to pucker and form gaps from the wall. Blade is resharpenable. Net weight: 1 oz.

No. 038 3″ Economy Notched Spreader

The No. 038 is a 3″ wide spreader for spreading base adhesive across the back of 4″ wide vinyl or rubber cove base. The 1/8” x 1/8” V-shaped notches are typically the correct size notch for spreading this adhesive (check manufacturer’s recommendations). The blade is made from brushed spring steel that has the right amount of flex for spreading adhesive. Blade is riveted to a wide contoured plastic handle. Net weight: 2 oz.

No. 039 4″ Economy Notched Spreader

The No. 039 is a 4″ wide spreader for spreading base adhesive across the back of 6″ wide vinyl or rubber cove base. The 1/8” x 1/8” V-shaped notches are typically the correct size notch for spreading this adhesive (check manufacturer’s recommendations). The blade is made from brushed spring steel that has the right amount of flex for spreading adhesive. Blade is riveted to a wide contoured plastic handle. Net weight: 3 oz.

No. 040 3″ Notched Spreader

The No. 040 is a top quality 3″ wide spreader used for spreading base adhesive across the back of 4″ wide vinyl or rubber cove base. Features a polished stainless steel blade and an attractive lacquered wood handle. The blade has 1/8” x 1/8” V-shaped notches which are typically the correct size for spreading this adhesive (check manufacturer’s recommendations). Blade has just the right amount of flex for spreading adhesive. Net weight: 2 oz.

No. 041 4″ Notched Spreader

The No. 041 is a top quality 4″ wide spreader used for spreading base adhesive across the back of 6″ wide vinyl or rubber cove base. Features a polished stainless steel blade and an attractive lacquered wood handle. The blade has 1/8” x 1/8” V-shaped notches which are typically the correct size for spreading this adhesive (check manufacturer’s recommendations). Blade has just the right amount of flex for spreading adhesive. Net weight: 2 oz.