Plank - Cutters & Miters

No. 673 14″ Wood Cutter

The No. 673 14” Wood Cutter cuts plank floor materials up to ¾” thick, including a variety of solid hardwood, engineered wood, laminate, and LVP planks. The cutter includes wheels allowing it to be easily moved from a kneeling position. The movable fence positions planks for straight or 45° diagonal cuts at different areas beneath the 14” blade for extra blade life. Also includes a cut guide that fastens on the fence for repeat cuts, and a ruler for making cuts of a certain length. Maximum material hardness to be cut: 1290 Janka (see instructions for further details). Replacement blades: No. 672 14″ Wood Cutter Blade. Net weight: 25.7 lbs.

No. 672 14” Wood Cutter Blade

Includes one 14″ blade for the Crain No. 674 14″ Wood Cutter. This model cutter has a red-colored label on the blade carrier, and includes a table light mounted on the blade carrier. This blade is made from high carbon steel, and is heat-treated and ground for sharpness. Net weight: 6 oz.

No. 679 9″ Wood Cutter

Cuts plank flooring up to 3/4″ thick, including a variety of solid hardwood, engineered wood, laminate and LVP planks. Maximum plank width for cutting is 9″. Features a moveable fence to position the material on either side of the blade for increased blade life. Maximum plank hardness: 1290 Janka scale (see instructions for further details). Replacement blade: No. 681 9″ Wood Cutter Blade. Net weight: 19.4 lbs.

No. 681 9” Wood Cutter Blade

Includes one 9″ blade for the Crain No. 679 9″ Wood Cutter. This blade is made from high carbon steel, and is heat-treated and ground for sharpness. Cuts a variety of solid hardwood, engineered wood, laminate and LVP planks. Net weight: 4 oz.

No. 855 Wood Miter

The wood miter makes fast angle cuts in wood quarter round, eliminating the need for a chop saw. The stout 2 ½” long high carbon steel blade is strong enough and sharp enough to shear cut wood materials cleanly. The table includes a gauge for cutting straight, 22.5°, or 45° angles. The 22.5° angle gauge is used for making a “soft corner” shape, while the 45° angle is used to make square corners. The extra-long vinyl-coated handles provide adequate leverage for cutting. Blade is replaceable (No. 856). Net weight: 14 oz.

No. 856 Wood Mitre Replacement Blade

Includes one each replacement blade for the Crain No. 855 Wood Mitre used to make angle cuts in wood quarter round. This stout, 2 ½” long blade is sharp enough and strong enough to shear cut wood materials cleanly. Made from high carbon steel for long life. Net weight: 1 oz.

No. 286C Personna LVP/LVT Blades (100)

These specialty blades for No. 285 Personna LVT/LVP Knife feature a wide beveled edge that scores smoothly with less resistance than utility blades. Utility blades, by comparison, have a sharp bevel that can slice too deep and stick. No. 286C is a pack of 100 blades, including 10 plastic “pocket packs” of ten blades each. The plastic pocket packs are helpful for sharing with a helper or storing blades in a pocket. Blade dimensions: length: 1.625″, width: .75″, thickness: .025″. Pack weight 10 oz.