Knives

No. 102

No. 102 Combination Knife

This resharpenable combination knife includes a long hook edge on one side and a deep hook edge on the other. The long hook edge has a sharp point and works well for precision cuts, particularly in following a previously scored line. The deep hook edge works well for long rough cuts in sheetgoods. The edges are pre-sharpened to an extreme sharpness. The blade is made from a special high carbon steel that holds an edge longer and is easily resharpenable. The contoured wood handle fits well in the hand and permits a strong grip. Net weight: 4 oz.

No. 732

No. 732 Extra-Grip Utility Knife

This utility blade knife has knurling up front as well as finger contours that provide better grip for precise cutting. Pivots open quickly for blade storage by loosening the folding thumb screw. Replacement blades are easily removed from the body with a teeter-totter action generated by internal ridges. Precision blade clamp holds tight and is magnetized for easier blade changes. Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook). No blades are included with this knife. Net weight: 3 oz.

No. 189

No. 189 Hook Handle Utility Knife

This utility blade knife has many added contours to provide improved grip and greater pulling power. Works especially well with hook blades on tough vinyl. The wide contoured midsection transitions to a narrow rear hook in proportion to the palm and fingers. The rear hook gives the little finger improved advantage for greater pulling power. The body pivots open by loosening the folding thumbscrew for fast access to replacement blades. The precision blade holder holds the blade tightly even at extended length. Blades: No. 295 (utility) or No. 996 (hook). No blades are included with this knife. Net weight: 4 oz.

No. 727

No. 727 Delphin Knife

This utility or hook blade knife has a hinged body that opens rapidly using a large thumbwheel in the center of the body. The body can be opened by rolling the wheel across a surface for access to blade storage. The knife is contoured for enhanced grip, and has a precision blade holder that holds blades tight even at extended length. The knife comes with a plastic carrier that fits inside a pocket. Blades: No. 295 (utility) or No. 996 (hook). No blades are included with this knife. Net weight: 4 oz.

No. 730

No. 730 Utility Knife

This classic utility or hook blade knife has a knurled body for solid grip. Designed with a compact profile and precision blade carrier for making detailed cuts in sheet vinyl materials. Pivots open quickly for blade storage using the folding thumbscrew. Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook). No blades are included with this knife. Net weight: 4 oz.

No. 996X

No. 996X Hook Blades (15)

Includes a pack of 15 high-quality German-made hook blades. The hook shape keeps the cutting edge off the floor when cutting over concrete. They are also good for following score lines in linoleum and making long rough cuts in sheet vinyl materials. These blades come in a plastic box with a hinged lid that snaps closed for storage. They can be used in most utility knives and any of the following Crain tools: No. 189 Hook Handle Utility Knife, No. 247 Multi-Purpose Wall Trimmer, No. 265 Stand-Up Cutter, No. 727 Delphin Knife, No. 728 Folding Utility Knife, No. 730 Utility Knife, and No. 732 Extra-Grip Utility Knife. Pack weight: 2 oz.

No. 006

No. 006 Airway Knife

The Gundlach No. 6 Airway Knife holds specialized blades for vinyl installation. The Crain No. 025A Airway Straight (Gundlach No. 25-AB) and Crain No. 026A Airway Hook (Gundlach No. 26-AB) blades are used with this knife. Comes with one No. 025A straight blade. These blades have a square central cutout that fits on a square boss in the knife that eliminates blade wobble. The blade holder has a long neck and an optimal angle for making cuts in sheetgoods materials. The knife body has finger contours to enhance grip. The knife halves open for blade storage by loosening the case-hardened fastener. Net weight: 6 oz.

No. 025A

No. 025A Airway Straight Blades (12)

Includes a vial of 12 Gundlach No. 25-AB trapezoidal-shaped straight blades for the Gundlach No. 6 Airway Knife (Crain No. 006). The Airway knife and blades are specialty blades for vinyl installation. These blades have a square central cutout that fits on a square boss in the knife that eliminates blade wobble. The blades are reversible and have two cutting edges. They come in a clear plastic vial with a re-sealable plastic lid for storage. Pack weight: 1 oz.

No. 026A

No. 026A Airway Hook Blades (12)

Includes a vial of 12 Gundlach No. 25-AB Hook Blades for the Gundlach No. 6 Airway Knife (Crain No. 006). The Airway knife and blades are specialty blades for vinyl installation. These blades have a square central cutout that fits on a square boss in the knife that eliminates blade wobble. The blades are reversible and have two hook- shaped cutting edges. They come in a clear plastic vial with a re-sealable plastic lid for storage. Pack weight: 1 oz.

No. 005

No. 005 Ward Handle

The Gundlach No. 5 Ward Handle knife is a specialized sheetgoods installation knife that allows blades to be mounted at different angles depending on the material. Blades can be mounted at a steep angle for stiff commercial vinyls and thick linoleum, or at less steep angles for regular materials. Takes Crain No. 012 (Gundlach No. 12-WB) Standard Blades or No. 013 (Gundlach No. 13-WB) Heavy Blades. This knife can also take the Gundlach No. 26-AB Hook Blade with the blade screw passing through the square hole of this blade. Comes with one No. 012 Standard Blade. Net weight: 1/16 oz.

No. 012

No. 012 Ward Standard Blades (12)

Includes a pack of 12 Standard Blades (Gundlach No. 12-WB) for the No. 005 Ward Handle (Gundlach No. 5). These specialized blades for sheetgoods installation can be mounted at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials. These blades are regular blades in comparison to the No. 013 (Gundlach 13-WB) Heavy Blades which are larger. The blades are packaged in a plastic tube with re-sealable lid for storage. Pack weight: 1 oz.

No. 013

No. 013 Ward Heavy Blade

Includes a pack of 12 Heavy Blades (Gundlach No. 13-WB) for the No. 005 Ward Handle (Gundlach No. 5). These specialized blades for sheetgoods installation can be mounted at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials. These blades are heavy blades in comparison to the No. 012 (Gundlach 12-WB) Regular Blades which are smaller. The blades are packaged in a plastic tube with re-sealable lid for storage. Pack weight: 1 oz.

No. 060 Dexter Linoleum Knife

This knife has a 2 1/2" deep hook blade that is ground especially for cutting linoleum. It is a permanent riveted blade and handle combination. (See the Crain No. 066 handle and Nos. 064 and 067 blades for the Dexter interchangeable handle and blades.) The blade of the No. 060 is made from high carbon steel, and is resharpenable. The wood handle is contoured for enhanced grip and has a dark varnished finish. This is the Dexter No. X752 1/2 (EDP No. 52140) Linoleum Knife. Net weight: 3 oz.

No. 063

No. 063 Dexter Vinyl Knife

This knife has a 2 1/2" deep hook blade that is ground especially for cutting vinyl. It is a permanent riveted blade and handle combination. (See the Crain No. 066 handle and Nos. 064 and 067 blades for the Dexter interchangeable handle and blades.) The blade of the No. 063 is made from high carbon steel, and is resharpenable. The wood handle is contoured for enhanced grip and has a dark varnished finish. This is the Dexter No. VX752 1/2 (EDP No. 52160) Vinyl Knife. Net weight: 3 oz.

No. 064

No. 064 Dexter Repl. Vinyl Blade

The No. 064 includes one each of the replaceable Dexter vinyl blade for use with the Dexter 10-D Handle (Crain No. 066). This blade is ground especially for cutting vinyl. It has a threaded tang type stem which threads into the Dexter 10-D Handle. The blade is made from high carbon steel, and is resharpenable. The No. 064 is the Dexter No. VX752 1/2 D (EDP No. 52170) Replaceable Vinyl Blade. Net weight: 1 oz.

No. 066

No. 066 Dexter 10-D Standard Handle

The No. 066 includes the Dexter No. 10-D handle only. It takes any of Dexter's threaded tang replacement blades including the Dexter VX752 1/2 D Replacement Vinyl Blade (Crain No. 064), Dexter X2AD Replacement Short Point Blade (Crain No. 067), or any of the others that are available. This handle has the same contour and dark varnished finish as Dexter's permanent handle and blade knives. It provides the convenience of replaceable blades with the same Dexter feel and quality. No blades are included with this handle. This is the Dexter No. 10-D (EDP No. 52010) Standard Handle. Net weight: 3 oz.

No. 067

No. 067 Dexter Repl. Short Point Blade

The No. 067 includes one each of the replaceable Dexter short point blade for use with the Dexter 10-D Handle (Crain No. 066). This short point blade is designed for cutting felt back linoleum. It has a threaded tang type stem which threads into the Dexter 10-D Handle. The blade is made from high carbon steel, and is resharpenable. The No. 064 is the Dexter No. X2AD (EDP No. 52050) Replaceable Short Point Blade. Net weight: 1 oz.

No. 070

No. 070 Dexter Custom Handle

This knife is one of the best available for vinyl installation. The angled blade holder puts the blade at an optimal angle for long cuts, and keeps the knuckles off the floor. It takes the specialty Dexter No. 072 Hook Blades that have an ultra-deep hook to cleanly cut felt back vinyl. It also takes standard utility and hook blades. The body has the classic contour of Dexter linoleum knives, and pivots open for blade storage by unscrewing the end cap. This is the Dexter No. 7 Custom Handle. Blades: No. 072 (Dexter No. 72-5 “V” Sharp Hook), No. 073 (Dexter No. 73-5 Heavy Duty Straight), No. 295 (standard utility) or No. 996 (standard hook). No blades are included with this knife. Net weight: 6 oz.

No. 072

No. 072 Dexter "V" Sharp Hook Blades

These specialty Dexter hook blades for the No. 070 Dexter Custom Handle have an ultra-deep V sharp hook to produce clean cuts in felt-back vinyl. When used in combination with the angled blade carrier of the Dexter Custom Handle, they produce smooth cuts over long stretches of material. The hook also keeps the edge off the floor when cutting over concrete. Comes in a pack of five blades. These are the Dexter No. 72-5 “V” Sharp Hook Blades. Pack weight: 1 oz.

No. 073C

No. 073C Dexter Heavy-Duty Straight Blades (100)

These heavy-duty trapezoidal straight blades are made by Dexter. They are for use in the No. 070 Dexter Custom Handle (Dexter No. 7). They have a heavy duty 0.025" thickness. They have the standard profile of utility blades, but also have additional cutouts in the body for Allway knives that used these cutouts. Comes in a bulk pack of 100 blades. These are the Dexter No. 73-C Utility Blades. Pack weight: 13 oz.

Subscribe to Knives