Rollers

No. 075

No. 075 75 lb. Vinyl Roller

This 75 lb. roller has an all-steel frame and zinc-plated roller sections for long term performance. The roller sections have smooth surfaces and rounded corners to reduce scratching and indentation of the vinyl. The outer sections are counterbored to provide recesses for the axle fasteners and prevent damage to walls. The three sections float independently on the axle to compensate for subfloor irregularities. Also comes with a protective case with wheels for transporting the roller that eliminates hand-carrying and picking up debris on the sections. Sections diameter: 4 1/2". Width: 16". Height: 38". Net weight: 75 lbs.

No. 076

No. 076 100 lb. Vinyl Roller

This 100 lb. roller has an all-steel frame and zinc-plated roller sections for long term performance. The roller sections have smooth surfaces and rounded corners to reduce scratching and indentation of the vinyl. The outer sections are counterbored to provide recesses for the axle fasteners and prevent damage to walls. The three sections float independently on the axle to compensate for subfloor irregularities. Also comes with a protective case with wheels for transporting the roller that eliminates hand-carrying and picking up debris on the sections. Sections diameter: 5 1/2". Width: 16". Height: 38". Net weight: 100 lbs.

No. 074

No. 074 Vinyl Roller Carrying Case

This protective case holds 75 or 100 lb. vinyl rollers and includes wheels to transport the roller from the van onto the jobsite. It eliminates hand-carrying of the roller and picking up debris on the sections that occurs if the roller sections contact the ground. The case stands on its own, and has two large handles on top for lifting when necessary. Two durable metal latches securely hold the case closed. Also holds Roberts and Gundlach rollers. U.S. Patents #7,188,724 B1 and #7,571,806. Net weight: 8 lbs.

No. 333

No. 333 Extension Wall Roller

This hand roller for vinyl includes three rubber rollers with just the right hardness to produce pressure on the vinyl without scratching and scuffing. The three rollers roll a 7 ½" wide section of vinyl on each pass. The axle and fasteners are recessed within the outer sections to allow the tool to work close to the wall. The raised aluminum handle has a large flat section for applying palm pressure. The twist-lock tube assembly adjusts handle length from 17" minimum to 27" maximum. Net weight: 3 lbs.

No. 348

No. 348 Square Edge Roller, Long

This hand roller for rolling vinyl at seams and other areas has a square edge solid steel roller and a longer nine inch varnished wood handle. The square edge on this roller and the offset, single arm bracket allow it to work up close to walls. The roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching and indentations. Ball bearing construction produces a smooth rolling action that is designed to last. Net weight: 2 lbs.

No. 348S

No. 348S Square Edge Roller, Short

This hand roller for rolling vinyl at seams and other areas has a square edge solid steel roller and shorter six inch varnished wooden handle. The square edge on this roller and the offset, single arm bracket allow it to work up close to walls. The roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching and indentations. Ball bearing construction produces a smooth rolling action that is designed to last. Net weight: 2 lbs.

No. 349S

No. 349 Round Edge Roller, Long

This hand roller for rolling vinyl at seams and other areas has a round edge solid steel roller and longer nine inch varnished wooden handle. The round edge on this roller allows it to work up close to vinyl flash coving, where a square edge roller can't go. The roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching and indentations. Ball bearing construction produces a smooth rolling action that is designed to last. Net weight: 2 lbs.

No. 349S

No. 349S Round Edge Roller, Short

This hand roller for rolling vinyl at seams and other areas has a round edge solid steel roller and shorter six inch varnished wooden handle. The round edge on this roller allows it to work up close to vinyl flash coving, where a square edge roller can't go. The roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching and indentations. Ball bearing construction produces a smooth rolling action that is designed to last. Net weight: 2 lbs.

No. 143

No. 143 Disposable Adhesive Syringe

This large capacity 2 oz. syringe with 2 inch long 13 gauge needle is used for repairing bubbles in glued-down flooring materials like carpet and vinyl. It delivers adhesive to the problem spot leaving a minimal puncture. Use with liquid adhesive such as latex. Not for use on hardwood repairs with thick adhesives such as hardwood adhesive. State law prohibits sale in these states: Connecticut, Maryland, New Jersey, Delaware, Massachusetts, New York, Maine, New Hampshire, Rhode Island.

No. 346

No. 346 "J" Roller

This hand roller is designed for plastic laminate installation. The 3" wide solid rubber roller produces about 30 - 45 PSI for positive bonding of the laminate onto the substrate. The rubber roller material is non-marking. The offset handle and recessed axle and fasteners allow the roller to work closely to the wall without scratching. Net weight: 8 oz.

Subscribe to Rollers