No. 145 Seam Adhesive Bottle

This multi-purpose seam sealer bottle works well on residential stretch-in or commercial glue-down jobs. It comes with a plastic applicator with a lip that hooks on the carpet for residential jobs. Instructions printed on the bottle explain how to cut off the lip and adjust applicator height on commercial jobs by using the floor itself as a guide. Each bottle also comes with an extra cap for storage. Works well with Crain Jiffytex Latex seam sealer, or other seam sealers, but it is a bottle only and does not include any seam sealer. Holds 8 oz. of sealer. Net weight 1 1/4 oz.

No. 204 Edge Sealing Glue Gun

This 100 watt glue gun comes with a precision carpet edge sealing tip (No. 627) and a conventional 1/8” nozzle (No. 629). The carpet edge sealing tip works at an upright angle that allows a convenient pulling motion along the carpet edge. The process occurs in the line of sight for observing the glue application. Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying. Afterwards, during the seaming process, the hot iron reactivates the hot melt, allowing the edges to bond together to reduce seam peaking. Takes standard 7/16” diameter glue sticks (Crain No. 201 10″ or No. 202 4″). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 1/4 lbs.

No. 627 Carpet Edge Sealing Tip

This precision glue tip for popular melt glue guns works at an upright angle that allows a convenient pulling motion along the carpet edge. The process occurs in the line of sight for observing the glue application. Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying. Afterwards, during the seaming process, the hot iron reactivates the hot melt, allowing the edges to bond together to reduce seam peaking. The standard thread size fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes. Thread size: 7/16” major diameter- 20 threads per inch. Includes glue tip only. Glue gun not included. In operation, this tip and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.

No. 628 1/4” Nozzle

The No. 628 1/4” nozzle is crimped on the end to form a thin opening approximately 1/32” (0.030″) x 7/32” (0.215″) to deliver a thin cross section of hot melt adhesive. It is good for precise edge sealing work. Attaches to either Crain No. 203, No. 204, or No. 207 Glue Guns or others guns with standard size thread. Thread size: 7/16” major diameter- 20 threads per inch. In operation, this nozzle and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.

No. 629 1/8” Nozzle

The No. 629 1/8” nozzle has an extended 1/8” tube that can deliver glue to precise spots such as along a fraying seam edge. The 0.085″ inside diameter delivers a enough adhesive even for sealing large tufts such as Berbers. Attaches to either Crain No. 203, No. 204 or No. 207 Glue Guns or other guns with standard size thread. Thread size: 7/16” major diameter- 20 threads per inch. In operation, this nozzle and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.