No. 152B Cushion Stair Tool

Stair tools are used with a mallet to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. This tool is a full four inches wide to tuck more carpet each time it is malleted. The soft cushion grip absorbs vibration and is textured for good grip. The outer edges are angled back, forming an offset that protects walls, and permits the corner of the tool to get all the way into an inside corner area for tucking. Smooth tapered blade will not snag or cut the carpet. Net weight: 1 lb.

No. 154 Narrow Stair Tool

Stair tools are used with a mallet to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. The narrow stair tool is only 2 7/8” wide to deliver more concentrated force when malleted. The outer edges of the tool are angled back, forming an offset that protects walls, and permits the corner of the tool to get all the way into an inside corner area for tucking. Smooth tapered blade will not snag or cut the carpet. Net weight: 1 lb.

No. 155 Bent Stair Tool

The bent blade of this stair tool is helpful when it is necessary to tuck carpet under toe spaces. It is also helpful for tucking carpet underneath Z-bar and under heat registers. The smooth tapered blade will not snag or cut the carpet. The four inch blade tucks a wide section of carpet each time it is malleted. Forged from an impact-resistant steel alloy, and nickel plated. Net weight: 1 lb.

No. 518 Stair Claw

This tool provides a simple way to stretch carpet across the stair tread and form it around the stair nosing. Hook the gripper teeth in the carpet just ahead of the stair nosing, then pull the leverage handle down. A pulling action is generated on the teeth that stretches the carpet across the stair tread. At the same time, the bottom edge of the tool tucks the carpet up under the stair nosing. Recesses in the bottom edge allow the nose of the tacker to be inserted for easy stapling. A tough job is made easier with the Stair Claw! Net weight: 2 ounces.

No. 507 Stairway Stretcher

This stretcher specifically designed for stairs provides a full and uniform stretch across the tread. Begin at the top of the stairs and work downwards, stretching then tucking the stair below. Prevents sore knees that result from kicking in stairs! Comes with carrying case. Net weight: 14 ½” lbs.

No. 151 White Rubber Mallet

This 20 oz. rubber mallet is made with a white solid rubber head that is non-marking. It can be used to tap down metal moldings without concern for scuff marks, denting, or scratching. The head has two large hammering surfaces that spread the force of impact. Works well with stair tools to prevent glancing blows and deflection. The hardwood handle is contoured for gripping. Net weight: 20 oz.

No. 332 Economy Hammer

This 20 oz. claw hammer is good for hammering down and pulling up tack strip. Forged steel head is induction hardened and includes a magnetic nail holder for starting nails in hard to reach places. The durable fiberglass handle is jacketed for overstrike protection and includes a contoured gripping surface. Fully featured and an excellent value! Net Weight: 20 oz.