No. 635 Opto Power Tacker

The Opto Power Tacker has a ruggedized electronic control board including an optical sensor that fires in response to the motion of a tough sliding trigger. The delicate mechanical microswitch of previous tackers, which frequently required repair, has been eliminated. This tacker also has a long, slender nose that more easily parts yarns to penetrate down to the carpet’s backing. The short overall height, narrow profile, and rounded cap allow it to get into tight areas. Powerful 11 AMP solenoid drives staples even into hardwoods. Precision jam-resistant magazine is rigidly mounted on a boxed frame and opens with a simple release button. Once open, the staple channel is easily accessible for removal of broken staples. Takes DuoFast® No. 5418 or No. 5415 staples, Shur-Fast (No. 619), or generics. Comes with case and staple saver box. DuoFast® is a registered trademark of the DuoFast® corporation. Net weight: 6.6 lbs.

No. 518 Stair Claw

This tool provides a simple way to stretch carpet across the stair tread and form it around the stair nosing. Hook the gripper teeth in the carpet just ahead of the stair nosing, then pull the leverage handle down. A pulling action is generated on the teeth that stretches the carpet across the stair tread. At the same time, the bottom edge of the tool tucks the carpet up under the stair nosing. Recesses in the bottom edge allow the nose of the tacker to be inserted for easy stapling. A tough job is made easier with the Stair Claw! Net weight: 2 ounces.

No. 617 Staple Saver Box (5418)

These boxes are designed specifically to hold Duo-Fast® No. 5418 Electric Tacker Staples. They are made from durable plastic telescoping square tubes that have a detented internal closure mechanism to hold tight when closed. It protects the boxes and staples from falling apart in your tool box. Saving staples saves money! Duo-Fast® is a registered trademark of the Duo-Fast® corporation. Net weight: 2 oz.

No. 618 Staple Saver Box (7512)

These boxes are designed specifically to hold Duo-Fast® No. 7512 Hammer Tacker Staples. They are made from durable plastic telescoping square tubes that have a detented internal closure mechanism to hold tight when closed. It protects the boxes and staples from falling apart in your tool box. Saving staples saves money! Duo-Fast® is a registered trademark of the Duo-Fast® corporation. Net weight: 2 oz.

No. 619 Shur-Fast® Staples (5M)

Shur-Fast® staples are precision ground to a unique 60° angled “sharp point” (SP), and are coated with a special thermoplastic to better penetrate hardwoods and provide greater holding power. These quality staples are preferred for use in our tackers because they can reduce misfiring and jamming. Dimensions: leg length: 9/16“, crown: 3/16“, 20 GA. Packaged 5000 staples per box. Net weight: 1 1/8 lbs. Shur-Fast® is a registered trademark of the Shur-Fast® corporation.

No. 550 5000 Series Hammer Tacker 1/2″ Crown

This economical hammer tacker for stapling carpet pad takes 5000 series pad staples, ½” crown x 5/16” leg. Loading staples or clearing jams is easy with the bottom-loading magazine. Magazine takes up to two full rows of staples. All-steel driving mechanism is durable. Thick rubber grip provides comfort and control.

No. 750 7500 Hammer Tacker 15/32″ Crown

This economical hammer tacker for stapling carpet pad takes 7500 series pad staples, 15/32” crown x 3/8” leg. Loading staples or clearing jams is easy with the bottom-loading magazine. Magazine takes up to two full rows of staples. All-steel driving mechanism is durable. Thick rubber grip provides comfort and control.

No. 130 Staple Hammer

This popular and proven Rapid® staple hammer has a simple design with only four moving parts. Clearing jams is easy by releasing a quick-access pin to remove the magazine and expose the staple channel. Includes contoured ergonomic soft plastic grip. Uses Crain No. 141C 3/8” leg chisel point or No. 142D 3/8” leg divergent point staples. Rapid® is a registered trademark of Isaberg Rapid® AB Sweden. Net weight: 2 lbs.

No. 141C 3/8” Chisel Point Staples (5M)

These staples are for use in our No. 130 Rapid® Staple Hammer. They have a 3/8” leg, a 3/8” crown, and the points are ground to a chisel point. Packaged 5000 staples per box. Net weight: 1 lb. Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 142D 3/8” Divergent Point Staples (5M)

These staples are for use in our No. 130 Rapid® Staple Hammer. They have a 3/8” leg, a 3/8” crown, and the points are ground to a divergent point. Packaged 5000 staples per box. Net weight: 1 lb. Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 147 Edge Binding Stapler

This stapler for binding area rugs is the Rapid® Classic 1 stapler with an added steel guide to adjust the throat opening. The guide is adjustable from a depth of 1/8” to 13/16”. Once adjusted, it staples at a constant distance from the edge of the carpet, which is helpful for edge binding of carpets. Precision all-steel construction for long, useful life. Takes Crain No. 148 Edge Binding Staples with 5/16” leg. Rapid® is a registered trademark of Isaberg Rapid® AB Sweden. Net weight: 1 lb.

No. 148 Edge Binding Staples (5M)

These staples are for use in our No. 147 Rapid® Edge Binding Stapler. They have a 5/16” leg and a 1/2” crown. Packaged 5000 staples per box. Net weight: 1 lb. Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 126 Staple Remover

This staple remover has a lower, ultra-thin prying lip to gets under the staples, and a pivoting upper jaw that activates automatically with the prying action to hold the staple against the prying lip. This design is highly effective for removing staples, particularly pad staples. The large leverage handle is ergonomically contoured. Net weight: 8 oz.