Other - Materials Handling

No. 280 H.D. Air Lifter

The Air Lifter moves heavy appliances up to 800 lbs. by generating high pressure jets through its perforated rubber load plates. Slide the air plates under the load, turn on the blower, adjust the convenient lift control valve, and the air plates inflate to lift the load. The plates glide over hard surfaces such as tile or hardwood without scratching. Comes with 4 smooth polypropylene pads which allow the plates to move over carpet. Saves time and reduces the risk of damaging new floors and injuries! The kit includes: 2 air plates, 2 horsepower blower with shoulder strap, lift control valve, T-connector, 3 hoses, 4 carpet pads, and protective carrying bag. Volts: 120VAC – Amps: 7.5. Net weight: 33 lbs.

No. 017 Metal Skat Skate Dolly Set

Crain Skat Skates are a pair of heavy-duty dollies that are adjustable in length for moving a wide variety of furniture and appliances. Each dolly in the set adjusts in length from 24″ to 32″. Each dolly has two 8″ x 10″ load pads and four pivoting casters beneath each pad. The 16 total casters allow the load to be easily moved or to change direction. The steel load bearing plates and telescoping tubes are welded together for durability. The soft urethane casters won’t scratch or dent most floors. The maximum load capacity for the set is 1,000 lbs. Set weight: 20 lbs.

No. 024 Rolling 24″ Tool Box

This fully-featured yet lightweight 24″ toolbox is made from advanced “structural foam” materials. The thick walls are very durable but weigh a lot less. The box rolls level with the ground thanks to a long, top-mounted pull handle that can be conveniently pulled along while walking. The inner tray has features that assist in carpet seaming, including a series of angled recesses which allow steam to escape while also evenly pressuring the seam. Includes a folding, recessed top carrying handle, and integral side handles for lifting with both hands. Case has three latches and a central hasp for locking. Net weight: 16 lbs.

No. 018 Tile Dolly

This dolly is specifically designed for moving heavy boxes of VCT and other tile around the jobsite. It rolls and turns with up to five boxes of VCT on its deck or approximately 300 lbs. of material. It has five swiveling casters including one in the middle to help it turn and rotate. The casters have hardened steel brackets and soft urethane rollers that tend not to scratch most floors. The rugged 11″ x 16″ reinforced plastic deck includes a handle for grabbing and pulling. Maximum capacity: 300 lbs. Net weight: 3 ³/₄ lbs.

No. 124 60″ Carpet Cart

This cart has a full-sized 20 inch wide x 60 inch long bed that provides extra support for long and heavy rolls up to 1000 lbs. The tubular steel frame is reinforced with central steel plates for added durability. Four eyelets are provided for tying down the load. The large diameter 16″ pneumatic tubed tires are tall and wide enough to roll up curbs or across gravel. Assembled size: length 60 inches, width 20 inches, height 18 inches. Weight capacity 1,000 lbs. Cart net weight: 42 lbs.

No. 015 18″ Vinyl Dolly

These 18″ dollies are designed for moving and unrolling heavy rolls of vinyl on the jobsite up to 16″ in diameter. Each of the three 18″ long heavy gauge tubular steel rollers is mounted on double ball bearings to form a rolling bed for the material. Simply pull on the sheet, and the material feeds off the roll. The dolly has four non-marking rubber wheels mounted on the sturdy cast aluminum end frames which permit the dolly to be easily moved even when loaded. Net weight: 13 lbs.

No. 016 36″ Vinyl Dolly

These 36″ dollies are designed for moving and unrolling heavy rolls of vinyl on the jobsite up to 16″ in diameter. Each of the three 36″ long heavy gauge tubular steel rollers is mounted on double ball bearings to form a rolling bed for the material. Simply pull on the sheet, and the material feeds off the roll. The dolly has four non-marking rubber wheels mounted on the sturdy cast aluminum end frames which permit the dolly to be easily moved even when loaded. Net weight: 20 lbs.

No. 354 Pocket Tool Pouch

This leather pocket pouch is sized 4 ½” wide to slide easily into a standard-sized pants back pocket. Small items like a knife or row finder wedge securely in the 3″ wide by 4 ½” deep inner pocket. An outer flap hooks over the pants pocket to protect it and to help keep the pouch from sliding out. Durable stitched and riveted construction. Outer dimensions: 4 ½” x 7 ½”. Net weight: 4 oz.

No. 407 Square Leather Tool Pouch

This square leather pouch hangs from the belt and has a deep 3 ¾” x 5 ½” rectangular pocket formed with 1″ wide opening to quickly insert and remove larger items. The 2 ¼” wide slots go onto most belts. Durable riveted construction. Outer dimensions 4 ¼” x 7″. Net weight: 4 oz.

No. 570 Clear Can

The Clear Can provides a great way to store nails and quickly dispense them on the job. The resealable lid is threaded on the clear plastic body and is easily removed to add nails. Squeezing the clear plastic body opens the lid to dispense the right amount of nails. After releasing, the lid closes and will not spill. Lid and bottom are made of thick, flexible vinyl and both are ribbed to prevent tearing. Sized at 2″ diameter and 6″ long, the Clear Can easily holds 250 stubby nails. Net weight: 2 oz.