Other
 No. 431 Trowel 1/16 x 1/16 x 1/16 V NotchThe No. 431 is a 1/16” open x 1/16” flat x 1/16” deep V-notched trowel. The front edge is angled back 10° for clearance when spreading close to the wall. The wooden handle is curved for comfortable grip. The handle bracket is welded to the spring steel blade. Net weight: 1 lb. |
 No. 432 Trowel 3/16 x 1/2 x 1/4 V NotchThe No. 432 is a 3/16” open x 1/2” flat x 1/4” deep V-notched trowel. The front edge is square and is notched for "cutting in" or spreading adhesive in tight areas like corners. The wooden handle is curved for comfortable grip. The handle bracket is welded to the spring steel blade. Net weight: 1 lb. |
 No. 433 Trowel 1/8 x 1/16 x 1/8 V NotchThe No. 433 is a 1/8” open x 1/16” flat x 1/8” deep V-notched trowel. The front edge is angled back 10° for clearance when spreading close to the wall. The wooden handle is curved for comfortable grip. The handle bracket is welded to the spring steel blade. Net weight: 1 lb. |
 No. 434 4" x 14" Finishing TrowelThe No. 434 is a 4" wide x 14" long trowel with no notches for spreading patch. Wooden handle is curved for comfortable grip. The handle bracket is welded to the spring steel blade. Net weight: 14 oz. |
 No. 439 4" x 16" Rounded Corner Finishing TrowelThe No. 439 is a 4" wide x 16" long trowel with no notches for spreading patch. All four corners are rounded at a 2” radius to prevent them from gouging the patch. The wooden handle is curved for comfortable grip. The handle bracket is welded to the spring steel blade. Net weight: 1 lb. |
 No. 039 4" Economy Notched SpreaderThe No. 039 is a 4" wide spreader for spreading base adhesive across the back of 6" wide vinyl or rubber cove base. The 1/8" x 1/8" V-shaped notches are typically the correct size notch for spreading this adhesive (check manufacturer's recommendations). The blade is made from brushed spring steel that has the right amount of flex for spreading adhesive. Blade is riveted to a wide contoured plastic handle. Net weight: 3 oz. |
 No. 038 3" Economy Notched SpreaderThe No. 038 is a 3" wide spreader for spreading base adhesive across the back of 4" wide vinyl or rubber cove base. The 1/8" x 1/8" V-shaped notches are typically the correct size notch for spreading this adhesive (check manufacturer's recommendations). The blade is made from brushed spring steel that has the right amount of flex for spreading adhesive. Blade is riveted to a wide contoured plastic handle. Net weight: 2 oz. |
 No. 040 3" Notched SpreaderThe No. 040 is a top quality 3" wide spreader used for spreading base adhesive across the back of 4" wide vinyl or rubber cove base. Features a polished stainless steel blade and an attractive lacquered wood handle. The blade has 1/8" x 1/8" V-shaped notches which are typically the correct size for spreading this adhesive (check manufacturer's recommendations). Blade has just the right amount of flex for spreading adhesive. Net weight: 2 oz. |
 No. 041 4" Notched SpreaderThe No. 041 is a top quality 4" wide spreader used for spreading base adhesive across the back of 6" wide vinyl or rubber cove base. Features a polished stainless steel blade and an attractive lacquered wood handle. The blade has 1/8" x 1/8" V-shaped notches which are typically the correct size for spreading this adhesive (check manufacturer's recommendations). Blade has just the right amount of flex for spreading adhesive. Net weight: 2 oz. |
 No. 353 Carbide Grout SawThis hand saw is used for removing old or damaged grout. The angled steel handle bracket keeps the hand from contacting the floor during the sawing motion. Comes with one carbide blade coated with carbide grit for cutting out grout between tiles, and one steel-toothed blade for heavy cleanout work after using the carbide blade. The steel-toothed blade can be used in combination with the carbide blade for wider grout joints or to protect walls when removing grout close up to a wall. Minimum grout joint width: 1/8”. Net weight: 4 oz. |
 No. 353Y Grout Saw Replacement Blades (2)This hand saw is used for removing old or damaged grout. The angled steel handle bracket keeps the hand from contacting the floor during the sawing motion. Comes with one carbide blade coated with carbide grit for cutting out grout between tiles, and one steel-toothed blade for heavy cleanout work after using the carbide blade. The steel-toothed blade can be used in combination with the carbide blade for wider grout joints or to protect walls when removing grout close up to a wall. Minimum grout joint width: 1/8”. Net weight: 4 oz. |
 No. 356 Carbide Hole SawThis tungsten carbide hole saw works with a drill (not included) to cut clean 1 3/8" holes for pipe clearance. Works well on ceramic and soft-bodied quarry tile. The replaceable 1/4" masonry bit holds a center. An internal spring ejects the cut piece cut. Net weight: 10 oz. |
 No. 056 Tile Polishing BrushThis specialized brush is used for cleaning off residual grout film. It is made with Tampico fibers that are suitable for floor polishing. To use, sponge down the grouted tile and let the film dry. Brush over the tile with this brush, and it removes the film and polishes the tile. Wooden handle is highly durable. Bristle area: 8 inches long x 2 1/2 inches wide. Handle length: 5 inches. Net weight: 8 oz. |
 No. 046 Replacement Carbide WheelThe No. 046 is a replacement carbide wheel for the Crain No. 045 Super Quarry Tile Cutter only. It will not fit on other Crain tile cutters. It is 7/8" diameter x .080" thick with a .260" diameter center hole. No fasteners are included with this carbide wheel. Net weight: 1 oz. |
 No. 400 ½” Carbide WheelThe No. 400 is a replacement carbide wheel for Crain Nos. 030, 031, 032X, and 033X Ceramic Tile Cutters. It is approximately 1/2" in diameter x .075" thick with a 1/4" diameter center hole Replacement fasteners including a steel bushing, washer, screw and lock nut are included with this carbide wheel. Net weight: 1 oz. |
 No. 081 10” RemGrit® Hacksaw BladeRemGrit® hacksaw blades are made by bonding carbide to a 10" steel rod that fits most hacksaw frames. In a hacksaw, they can cut curves and straight lines in ceramic tile, brick, or marble, and can work in tight areas. Cuts equally well on both outward and inward strokes the saw. Hacksaw not included. Net weight: 1/2 oz. |
 No. 684 Extension CordThis 25 foot long 16 gauge 3 conductor grounded extension cord is constructed for use with power tools indoors or outdoors. Rated for usage up to 13 AMPs at 125 volts. Plug and receptacle are molded on the cordage for durability. Net weight: 2 lbs. |
 No. 401 6-in-1 ScrewdriverThis screwdriver converts between the four most needed Phillips and slotted screwdriving tips, and provides two nutdriver sockets as well. Includes #1 and #2 Phillips tips, 3/16" and 5/16" slotted tips, and 1/4" and 5/16" nutdrivers. Made with high-impact plastic ribbed handle for sure grip, and heat-treated alloy steel socketed drive shaft. Net weight: 5 oz. |
Pages
