- Cuts 12” tile straight. Includes two guides for repeat cuts.
- Highly accurate for precisely matching edges. Straightness of cut: +/-.005”.
- With floor guide against last field tile, and tile against wall, cuts amount needed.
- Also includes fast-acting blade height adjustment knobs, and carrying case.
- Carrying case for Crain No. 001 Model “A” Tile Cutter.
- Streamlined, easy-to-carry design also saves space.
- Custom-formed interior protects the cutter in transit.
- Features durable metal latches and recessed handle. Includes case only.
- Specialized sheetgoods knife with unique blade carrier for mounting blades at different angles.
- Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
- Takes Crain No. 012 (Gundlach No. 12-WB) Standard or No. 013 (Gundlach No. 13-WB) Heavy Blades.
- Takes Crain No. 026A Airway Hook Blades (Gundlach No. 26-AB) with blade screw passing through square hole.
- Gundlach No. 6 Airway Knife uses specialty blades for vinyl. Comes with a No. 025A straight blade.
- Takes Crain No. 025A (Gundlach No. 25-AB Straight) or No. 026A (Gundlach No. Hook) blades.
- Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
- Body has long, angled blade holder and finger contours to enhance grip. Opens for blade storage.
- Cuts up to 18 inch vinyl tiles straight, or 12 inch tiles diagonally.
- Steel reinforced blade carrier and large, rigid base ensure straight, accurate cuts.
- Includes straight guide, diagonal guide, and self-measuring floor guide.
- With floor guide against last field tile, and tile against wall, cuts amount needed.
- Pack of 12 Standard Blades (Gundlach No. 12-WB) for No. 005 Ward Handle (Gundlach No. 5).
- Specialized sheetgoods installation blades with regular profile compared to No. 013 Heavy Blade.
- Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
- Packaged in a plastic tube with resealable lid for storage.
- Pack of 12 Heavy Blades (Gundlach No. 13-WB) for No. 005 Ward Handle (Gundlach No. 5).
- Specialized sheetgoods installation blades with regular profile compared to No. 013 Heavy Blade.
- Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
- Packaged in a plastic tube with resealable lid for storage.
- 18” long dollies for moving and unrolling up to 16” rolls of vinyl on the jobsite.
- Three 18” long heavy gauge tubular steel rollers mounted on double ball bearings to form a rolling bed.
- Simply pull on the sheet and the material feeds off the roll.
- Four non-marking rubber wheels are mounted on the sturdy cast aluminum end frames.
- 36” long dollies for moving and unrolling up to 16” rolls of vinyl on the jobsite.
- Three 36” long heavy gauge tubular steel rollers mounted on double ball bearings to form a rolling bed.
- Simply pull on the sheet and the material feeds off the roll.
- Four non-marking rubber wheels are mounted on the sturdy cast aluminum end frames.
- Pair of heavy-duty furniture or appliance moving dollies adjustable in length from 24” – 32”.
- Each dolly has two 8” x 10” load pads and 4 pivoting casters. Total 16 soft urethane casters.
- Loads are easily moved or change direction. Maximum capacity: 1000 lbs.
- Welded steel load plates and telescoping tubes. Soft urethane casters won’t scratch most floors.
- 11” x 16” dolly for moving heavy boxes of VCT and other tile around the jobsite.
- Rolls and turns with up to 5 boxes of VCT on its deck or approximately 300 lbs. of material.
- Includes 5 swiveling casters including one in the middle to help it turn and rotate.
- Casters have hardened steel brackets and soft urethane rollers that don’t scratch on most floors.
- Lightweight 24” toolbox made from durable structural foam materials.
- Pull along while walking using long, top mounted pull handle.
- Inner tray has angled recesses allowing steam from the carpet seam to escape.
- Includes folding handle, side handles, 3 steel latches, and central hasp to lock.
- Vial of 12 Gundlach No. 25-AB Straight Blades for the Gundlach No. 6 Airway Knife (Crain No. 006).
- Specialty blades for vinyl installation.
- Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
- Packaged in a clear plastic vial with a re-sealable plastic lid for storage.
- Vial of 12 Gundlach No. 25-AB Hook Blades for the Gundlach No. 6 Airway Knife (Crain No. 006).
- Specialty blades for vinyl installation.
- Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
- Packaged in a clear plastic vial with a re-sealable plastic lid for storage.
- 3” wide spreader for spreading base adhesive across the back of 4” wide vinyl or rubber cove base.
- 1/8” x 1/8” V-shaped notches typically right size for base adhesive (check mfg. recommendation).
- Blade is made from brushed spring steel with the right amount of flex for spreading adhesive.
- Blade is riveted to a wide contoured plastic handle.
- 4” wide spreader for spreading base adhesive across the back of 6” wide vinyl or rubber cove base.
- 1/8” x 1/8” V-shaped notches typically right size for base adhesive (check mfg. recommendation).
- Blade is made from brushed spring steel with the right amount of flex for spreading adhesive.
- Blade is riveted to a wide contoured plastic handle.
- Top quality 3” wide spreader used for spreading base adhesive on the back of 4” wide cove base.
- Features polished stainless steel blade and attractive lacquered wood handle.
- 1/8” x 1/8” V-shaped notches typically the right size for this adhesive (check mfg. recommendation).
- Blade has just the right amount of flex for spreading adhesive.
- Top quality 4” wide spreader used for spreading base adhesive on the back of 6” wide cove base.
- Features polished stainless steel blade and attractive lacquered wood handle.
- 1/8” x 1/8” V-shaped notches typically the right size for this adhesive (check mfg. recommendation).
- Blade has just the right amount of flex for spreading adhesive.
- Replacement carbide wheel for the Crain No. 045 Super Quarry Tile Cutter only.
- Dimensions: 7/8” diameter x .080” thick.
- Center hole: .260” diameter
- No fasteners are included with this carbide wheel. This wheel will not fit other Crain tile cutters.
- Specialty linoleum knife with 2 1/2” deep hook blade made from high carbon steel.
- Permanent riveted handle and knife combination.
- Wood handle is contoured for enhanced grip and has a dark varnished finish.
- This is the Dexter No. X752 1/2 (EDP No. 52140) Linoleum Knife.
- Specialty vinyl knife with 2 1/2” deep hook blade made from high carbon steel.
- Permanent riveted handle and knife combination.
- Wood handle is contoured for enhanced grip and has a dark varnished finish.
- This is the Dexter No. VX752 1/2 (EDP No. 52160) Vinyl Knife.
- The Dexter No. 7 Custom Handle is one of the best available knives for vinyl installation.
- Angled blade holder puts blade at an optimal angle, and keeps knuckles off the floor.
- Body has the classic Dexter contour, and pivots open for blade storage by removing end cap.
- Takes standard utility and hook blades.
- Protective case with wheels holds 75 or 100 lb. rollers.
- Eliminates hand carrying of the roller.
- Eliminates picking up debris on the roller sections.
- Includes large handles on top for lifting when necessary, and durable metal latches.
- 75 lb. roller with all-steel frame and zinc-plated roller sections for durability.
- Smooth, radiused roller sections reduce scratching and indentation.
- Outer sections have recesses for fasteners to prevent wall damage.
- Case with wheels for transport eliminates hand-carrying and picking up debris on sections.
- 100 lb. roller with all-steel frame and zinc-plated roller sections for durability.
- Smooth, radiused roller sections reduce scratching and indentation.
- Outer sections have recesses for fasteners to prevent wall damage.
- Case with wheels for transport eliminates hand-carrying and picking up debris on sections.
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
- Oval head seats in metal moldings with countersunk holes.
- Semi-square body compresses against pre-drilled 1/8” hole.
- Fastener dim.: 1/8” dia. X 7/8” long. Hole: 1/8” dia. x 7/8” deep.
- Irwin® STRAIT-LINE® standard white marking chalk for marking out cuts of carpet.
- Leaves a temporary mark with high visibility.
- Cap includes a folding extended nozzle for fast, precise refills.
- Includes 8 oz. of chalk per bottle.
- Irwin® STRAIT-LINE® standard blue marking chalk for marking out cuts of carpet.
- Leaves a temporary mark with high visibility.
- Cap includes a folding extended nozzle for fast, precise refills.
- Includes 8 oz. of chalk per bottle.
- Hacksaw blade made by bonding carbide to a 10” steel rod.
- In a hacksaw, these blades can cut curves and straight lines in ceramic tile, brick, or marble.
- Works in tight areas, and cuts equally well on both outward and inward strokes of the saw.
- Hacksaw not included.
- Resharpenable knife with long hook edge, deep hook edge, and contoured wood handle.
- Long hook edge has sharp point for precision cuts, particularly to follow a scored line.
- Deep hook edge works well for long rough cuts in sheetgoods.
- Edges are extremely sharp, stay sharp longer, and are easily resharpenable.
- Resharpenable 3” blade with greater thickness for rigidity and durability.
- Gentle hook forms a sharp point at the end that does the cutting.
- Superior German steel alloy holds its edge after resharpening long after others have dulled.
- Wood handle is contoured for comfortable grip.
- Used for miscellaneous pattern layout scribing for sheet vinyl installation.
- Also used for marking score lines on vinyl tile.
- 5 ¾” long handle has precision chuck and screw-on cap for holding replaceable needles.
- Takes standard Crain No. 129 Scriber Needles.
- Kit for scribing inside corners includes cove scriber, cove template, and pin vise.
- Cove scriber scribes lines on the felt for positioning the cove template.
- Cove template scribes the inside cove pattern onto the vinyl.
- Cove scriber also scribes a top edge on the vinyl to fit the cap metal. Repl. needles: No. 129
- Versatile 6” bar scriber works both as a wall scriber and seam scriber.
- Includes rounded end guide for wall scribing and bottom guide for seam scribing.
- The 6” bar provides approximately 5” of length adjustment using the steel thumbscrew.
- Needle adjusts to material thickness using a screw in the bar (Repl. needle: No. 129).
- Versatile 8” bar scriber works both as a wall scriber and seam scriber.
- Includes rounded end guide for wall scribing and bottom guide for seam scribing.
- Housing has a hole in the bottom for a second needle for circles or feature strips.
- 8” bar for approx. 6” of length adjustment. Needle adjusts to material thickness. (Repl. needle: No. 129)
- Six foot steel carpet straight edge.
- Precision ground for straightness ± .005".
- Provides the accuracy necessary to prepare carpet seam edges.
- Includes 45° angle on one end and hanging hole.
- Four foot steel carpet straight edge.
- Precision ground for straightness ± .005".
- Provides the accuracy necessary to prepare carpet seam edges.
- Includes 45° angle on one end and hanging hole.
- 18” long flexible steel straight edge.
- Bends easily, but returns to its original flat condition.
- Includes a 45° angle on one end, and a hanging hole on the opposite end.
- Finished with bright red paint. Dimensions: 18" long x 2" wide x 1/32" thick.
- 32” long flexible steel straight edge.
- Bends easily, but returns to its original flat condition.
- Includes a 45° angle on one end, and a hanging hole on the opposite end.
- Finished with bright red paint. Dimensions: 32" long x 2" wide x /32" thick.
- Pack of four replacement blades for the Crain No. 174 Instant Repair Tool.
- When used in the tool, they cut circular holes in carpet for repairs.
- Four blades included in the pack can replace all four blades in the tool if desired.
- Blade dimensions: length: 1.035", width: .50", thickness: .020".
- 39” long flexible steel straight edge.
- Bends easily, but returns to its original flat condition.
- Includes a 45° angle on one end, and a hanging hole on the opposite end.
- Finished with bright red paint. Dimensions: 39" long x 2" wide x /32" thick.
- Includes both a serpent edge on one side and a straight edge on the other.
- Serpent edge produces less visible seams on “sculptured” pattern carpet.
- Straight edge is precision ground +/-.005” for cutting carpet seam edges from the back.
- Made from 75” long 1/8” thick galvanized steel.
- Includes both a serpent edge on one side and a straight edge on the other.
- Serpent edge produces less visible seams on “sculptured” pattern carpet.
- Straight edge is precision ground +/-.005” for cutting carpet seam edges from the back.
- Made from 36” long 1/8” thick galvanized steel.
- Tubular steel frame includes full-sized 20” wide x 60” long bed.
- Handles rolls up to 1,000 lbs. 60” length supports long rolls.
- Includes four steel eyelets for tying down the load and reinforcing center plates.
- 16” pneumatic tubed tires are tall and wide enough to roll over gravel or up curbs.
- Irwin® aluminum chalk line features durable aluminum housing and a steel rewind handle.
- The polyester line delivers 5 - 6 strikes per pull. Holds approx. 2 oz. of chalk.
- Handle locks the line for use as plumb bob.
- Line length: 100 feet.
- Prying lip is ultra-thin to get underneath the staples.
- Pivoting upper jaw activates automatically to hold the staple against the prying lip.
- Large leverage handle is ergonomically contoured.
- Highly effective for removing staples, especially pad staples.
- For use in Crain No. 194 Outside Corner Scriber ONLY.
- Dimensions: .058" outside diameter and 9/16" length with sharp point.
- Made from high carbon steel for long useful life.
- Packaged 50 needles per container in a durable plastic box with lid that snaps shut.
- Pack of 50 replacement needles used in most Crain dividers and scribers.
- Not for use in Crain No. 194 Outside Corner Scriber.
- Dimensions: .063" in diameter, 7/8" In length, and have a sharp point for scribing.
- Use in these Crain tools: Nos. 109, 110, 111, 112, 188, 240, 355, 380, 382
- Popular and proven Rapid® design has only four moving parts to minimize jams.
- Clearing jams is easy by releasing a quick-access pin to remove magazine and expose staple channel.
- Uses Crain No. 141C 3/8" leg chisel point or No. 142D 3/8" leg divergent point staples.
- Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
- High speed 3X rewind handle for fast retrieval of line.
- Metal rewind handle can also activate a clutch to release line without spinning.
- Refills by inserting chalk bottle nozzle into the “Big Mouth” grommet.
- 100 ft. twisted synthetic line. Chalk capacity: 3 oz.
- For use in our No. 130 Rapid® Staple Hammer.
- Points are ground to a chisel point.
- Dimensions: 3/8" leg and 3/8" crown. Packaged 5000 staples per box.
- Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
- For use in our No. 130 Rapid® Staple Hammer.
- Points are ground to a divergent point.
- Dimensions: 3/8" leg and 3/8" crown. Packaged 5000 staples per box.
- Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
- Large capacity 2 oz. syringe with 2” long 13 gauge needle.
- Used for repairing bubbles in glued down carpet or vinyl, NOT for hardwood repairs.
- For use with liquid adhesive such as latex, NOT thick hardwood adhesive.
- Sale prohibited in: CT, MD, NJ, DE, MA, NY, ME, NH, RI
- Multi-purpose seam sealer bottle for residential stretch-in or commercial jobs.
- Plastic applicator includes a lip that hooks on the carpet on residential jobs.
- Instructions on the bottle explain how cut off lip for commercial jobs.
- Holds 8 oz. of sealer, but is a bottle only and does not include sealer.
- Rapid® Classic 1 design with an added steel guide to adjust the throat opening from 1/8” to 13/16”.
- With guide adjusted, it staples at a constant distance from the edge of the carpet.
- Guide is very helpful for edge binding of carpets. Uses Crain No. 148 5/16” Staples.
- Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
- For use in our No. 147 Rapid® Edge Binding Stapler.
- Dimensions: 5/16" leg and 1/2" crown.
- Packaged 5000 staples per box.
- Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
- Folds square for stretching off outside corners.
- Put legs at a 135° angle and lock the pivot for stretching off a post.
- In the flat position, the tail spans 20 inches.
- Rubber pads help it stay put under load. Wheels help it move fast after the stretch.
- Driving head only of our fixed head stretcher.
- Push button stretch lock is located conveniently on the handle.
- Visual pin depth adjustment knob located conveniently on the head.
- No screws or screwdrivers are needed to adjust the pin depth.
- 20 oz. rubber mallet with while solid rubber head and hardwood handle.
- Use to tape down metal moldings without scuffing, denting or scratching.
- Head has two large hammering surfaces that spread the force of impact.
- Works well with stair tools to prevent glancing and deflection.
- Driving head only for our swivel head stretcher.
- Swivel head provides swivel 60° of free swivel for patterned carpet.
- Built-in lock pin locks the swivel head in five helpful positions.
- Push-button conveniently located on the handle for partial stretches.
- Tucks carpet into the corner of stair treads, or at the wall between the base and the tack strip.
- Tool is a full four inches wide to tuck more carpet with each hammer blow.
- Soft cushion grip absorbs vibration and is textured for grip.
- Outer edges are angled back to prevent wall contact and tuck all the way into a corner.
- Tucks carpet into the corner of stair treads, or at the wall between the base and the tack strip.
- Blade is only 2 7/8” wide to deliver more concentrated force when malleted.
- Outer edges are angled back to prevent wall contact and tuck all the way into a corner.
- Forged from an impact-resistant steel alloy, and nickel-plated.
- Bent blade of this stair tool can tuck carpet beneath a toe space.
- Also helpful for tucking carpet underneath Z-bar and under heat registers.
- Blade is only 2 7/8” wide to deliver more concentrated force when malleted.
- Forged from an impact-resistant steel alloy, and nickel-plated.
- Steel pry bar gets behind wood base and moldings to pry them off with minimum damage.
- Both ends have slim, wide profile prying surfaces that are polished smooth for safe insertion.
- Both ends have sharp, beveled nail slots for removing nails and brads with small heads and staples.
- Made from forged and hardened steel and nickel plated.
- Vaughan 15” Superbar is the classic heavy-duty pry bar.
- Includes “shepherd’s crook” rocker end for prying power, and flat end for getting under nails.
- Includes three beveled nail slots.
- Both ends polished for insertion behind moldings and base.
- Used to press and hold carpet in the gully as the stretch is released.
- Causes pins to set better in the carpet’s backing and tucks the carpet.
- Flexible blade works as 1/16 inch x 1/16 inch “U” notch trowel.
- Ergonomic blue plastic handle.
- Used to press and hold the carpet in the gully as the stretch is released.
- Causes pins to set better in the carpet’s backing and tucks the carpet.
- Blade has no notches for better performance as a tucking tool.
- Thicker 16 gauge plated steel will not bend under load.
- Long nose hammering tool extends beneath toe-kicks to drive tack strip nails.
- Hammering tip is magnetized to hold a nail in position.
- Forged alloy steel body with bonded rubber-like handle.
- Rubber-like handle reduces impact vibration transmitting to hand and wrist.
- Precision magnetic tip positions and drives nails into difficult areas.
- Good for fastening tack strip to concrete using hard to hold stubby nails.
- Saves fingers from being hammered.
- Made with a 5 ½” long stainless steel body and a powerful magnetic insert.
- Cuts a three inch diameter circle for removing stained areas from a carpet.
- Uses four blades to cut the carpet cleanly.
- Sharp central pivot pin is spring-loaded to adjust automatically to different thicknesses of carpet.
- Includes plastic cap to protect the body and pin in storage.
- Multi-purpose steel blade can tuck carpet near fragile tiles or toilets.
- Blade also includes a sharp hook edge for heavy cutting, and front edge for scraping.
- Front edge includes a notch for removing door pins.
- Durable aluminum body with steel tapping end. Blades are replaceable: Order No. 177.
- Compact miter box includes straight and 45° angles needed by flooring installers and saves space in the tool box.
- Steel guides are highly accurate and case-hardened to resist wear even when used with hacksaw.
- Wood base allows clean cuts through aluminum trims without dulling the hacksaw blade.
- Base includes synthetic rubber non-slip pad that helps the tool stay put and won’t mark most surfaces.
- Made with a powerful torsion spring and two grippers oriented inwardly to pull seams together.
- Helpful on glue-down carpet installations to pull and hold seams together.
- Inward pulling force can be controlled with the amount of hand pressure.
- Spring arms are vinyl-coated for comfort. Nap grips are replaceable. Sold in set of two.
- Includes a pack of 12 carpet trimmer blades. For use in popular carpet wall trimmers.
- Blades are bevel ground on the top surface only. Install in the trimmer with bevel side up.
- Prevents trimmer from rising in the cut, resulting in an accurate height of cut and easier tucking.
- Blades come in a plastic box with hinged lid that snaps closed for storage.
- Includes a pack of 100 Personna® carpet trimmer blades. For use in popular carpet wall trimmers.
- Blades are bevel ground on the top surface only. Install in the trimmer with bevel side up.
- Prevents trimmer from rising in the cut, resulting in an accurate height of cut and easier tucking.
- Blades are individually wrapped in paper and come in a laminated paper box.
- Offset handles easily held parallel with the floor for trimming carpet tufts.
- Duckbill rides on top of the carpet to position the top blade.
- Finger loops are oversized. Right side loop accommodates two fingers for ease of use.
- Handles are vinyl-coated for ease of grip.
- Highly accurate seam scriber that provides ease of adjustment and good grip and control.
- Offset distance from the guide to the needle adjusts using a precision thumbwheel.
- Hinged base folds for easy insertion of the tool at the overlapped seam.
- Needle height is adjustable. Replacement needles: No. 129
- Utility and hook blade knife with multiple added contours for improved grip.
- Wide contoured midsection transitions to a narrow rear hook in proportion to the palm and fingers.
- Rear hook gives the little finger improved advantage for greater pulling power.
- Body pivots open for fast access to replacement blades by loosening the folding thumbscrew.
- Offset handles easily held parallel with the floor for trimming carpet tufts.
- Duckbill rides on top of the carpet to position the top blade.
- Smaller one inch loops for precision control.
- Handles are vinyl-coated for ease of grip.
- Insert the point into the back of the Z-bar, then run it down the length.
- Angled leg offsets the handle from the carpet to prevent knuckles from rubbing on the carpet.
- Also useful for light carpet stretching in tight areas.
- Sharp, high carbon steel point, with rounded hard plastic handle.
- Outside corner scriber for outside cove vinyl corners. Works also on rubber and vinyl base.
- Scribes a line on the side of the corner that remains to be trimmed.
- Uses the previously trimmed side as a guide using a guide leg with rounded end.
- Adjustable for various material thicknesses. Replacement needles: No. 128
- Sharp, high-carbon steel point penetrates the carpet’s backing for lifting it off the tack strip.
- Also helpful for light carpet stretching in tight areas.
- Point has opposite flat steel head seated in the hard plastic handle for hammering.
- Rounded handle fits the palm comfortably.
- Extra thick polyurethane skin for increased durability.
- Polyurethane skin helps prevent build-up of sharp items like splinters that can scratch floors.
- Designed for floor installers, these pads provide protection for kneeling and knee kicking.
- Made from flexible neoprene. Machine-washable. Inner knee pad is replaceable.
- Provides protection for both kneeling and knee kicking, so they stay on at all times.
- Extra wide straps don’t pinch even when wearing shorts.
- Contour conforms with the knee whether walking, kneeling or kicking.
- Made from flexible yet durable neoprene that’s machine-washable. Inner pad is replaceable.
- Genuine sponge-rubber knee pads.
- ½” wide straps include fast and durable hinge-activated buckles.
- To fasten, insert the angled end of the strap and press the lever down.
- Buckles hold tight with no carpet fuzz hassle like with hook and loop fasteners.
- Polyurethane skin prevents build-up of sharp items such as splinters that scratch floors.
- Polyurethane is also highly resistant to tearing and penetration, providing extra durability.
- Designed for floor installers, these pads provide protection for kneeling and knee kicking.
- Made from flexible neoprene. Machine-washable. Inner knee pad is replaceable.
- Genuine sponge-rubber knee pads.
- The ½” thick rubber provides good comfort and durability.
- Elastic straps are 1 ½” wide to reduce pinching.
- Straps include fast-acting hook and loop fasteners.
- 10 inch long glue sticks with standard 7/16” diameter (approx.).
- They come in a resealable heavy-duty clear plastic bag for storage.
- Each bag includes one pound of glue or 19 sticks.
- For use in Crain Nos. 203, 204 or 207 Glue Guns. CAUTION: Melted glue temp. up to 400°F.
- 4 inch long glue sticks with standard 7/16” diameter (approx.).
- They come in a resealable heavy-duty clear plastic bag for storage.
- Each bag includes 8 oz. of glue or 24 sticks.
- For use in Crain Nos. 203, 204 or 207 Glue Guns. CAUTION: Melted glue temp. up to 400°F.
- 80 watt UL listed glue gun.
- Comes with Crain No. 629 1/8” Nozzle with small diameter extension tube.
- 1/8” nozzle is helpful for precision carpet seam edge sealing.
- Also comes with standard nozzle. Works with standard 7/16” diameter glue sticks.
- 100 watt glue gun with a carpet edge sealing tip (No. 627) and conventional 1/8” nozzle (No. 629).
- Carpet edge sealing tip works at an upright handle that allows a convenient pulling motion.
- Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
- During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
- Ultra-thick padding for greater kneeling comfort.
- Tough leather wear surface minimizes build-up of sharp objects that can scratch floors.
- Padding is riveted to the leather.
- Durable wide straps with steel buckles.
- High powered 220W gun quickly melts glue sticks for high output applications.
- Use for gluing tack strip and other accessory trims to concrete with acrylic glue sticks.
- Gun has variable temperature control from 284°F - 428°F and comes with carrying case.
- Takes standard 7/16" diameter glue sticks (Crain No. 201 10" regular, No. 202 4" regular, or No. 208 10" acrylic).
- Quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors.
- A fast alternative to aluminum drives or contact cement, they set up after 60 – 80 seconds.
- Includes 19 each 10” long sticks (1 lb. of adhesive) in a self-closing bag for storage.
- Sticks are standard 7/16” diameter for use in a wide variety of glue guns.
- Provides more time to position materials (approx. 3 minutes).
- Helpful to position starter boards in hardwood installation.
- Helpful to position long trim pieces.
- 10” long sticks, standard 7/16" diameter. Comes 20 sticks (1 lb.) per resealable bag.
- Slotted razor blade carpet knife with multiple added contours for improved grip.
- Wide contoured mid-section transitions to a narrow rear hook in proportion to palm and fingers.
- Rear hook gives the little finger improved advantage for greater pulling power.
- Body pivots open by loosening the folding thumbscrew for fast access to blades.
- 1/8” solid carbide drill bit with two usable ends.
- Makes a 1/8” hole in concrete for fastening aluminum drives.
- Requires Crain No. 225 1/8” Hexagon Adaptor for the drill chuck.
- Drill RPM must be maintained between 1700 to 3500 RPM.
- 3/16” solid carbide drill bit with two usable ends.
- Makes a 3/16” hole in concrete for fastening aluminum drives.
- Requires Crain No. 226 3/16” Hexagon Adaptor for the drill chuck.
- Drill RPM must be maintained between 1700 to 3500 RPM.
- Adapts 1/8” solid carbide drill bits to a standard electric drill chuck.
- Works with Crain No. 223 1/8” Solid Carbide Drill Bits.
- Shank diameter is 1/4”.
- Internal collet tightens down on the drill bit to hold it in the adaptor.
- Adapts 3/16” solid carbide drill bits to a standard electric drill chuck.
- Works with Crain No. 224 3/16” Solid Carbide Drill Bits.
- Shank diameter is 1/4”.
- Internal collet tightens down on the drill bit to hold it in the adaptor.
- Heavy-duty scraper with 66” long solid steel body.
- Provides the weight needed to force through and scrape up glued-down flooring materials.
- Beveled blade carrier deflects material build-up. Case hardened to reduce bending.
- Includes replaceable 2” wide high carbon steel blade that holds an edge and withstands impact.
- Heavy-duty two inch wide blade for use in the No. 230 Deluxe Floor Scraper.
- Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
- Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
- Includes one each blade only.
- Wider three inch blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material.
- Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
- Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
- Includes one each blade only.
- Inexpensive, 6” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
- Evenly spreads 5 beads of adhesive for optimal application onto 6” wide cove base.
- 5 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
- End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
- Inexpensive, 3” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
- Evenly spreads three beads of adhesive for optimal application onto 3” wide cove base.
- 3 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
- End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
- Uses standard quart cove base adhesive cartridges.
- Smooth pushrod delivers continuous feed and pressure. Releases using easy-access thumb lever.
- Handy cartridge tip cutter is built in to the handle.
- Riveted 5 ½” seal puncture needle pivots out from the body to break the cartridge seal.
- Uses standard 1/10 gallon cove base adhesive cartridges.
- Smooth pushrod delivers continuous feed and pressure.
- Rod pressure is released for reloading or for stopping the flow using easy-access thumb lever.
- Durable and economical all-steel construction.
- Trims excess carpet at the wall leaving right amount for tucking.
- Deluxe trimmer has top-loading blade carriers for fast blade changes.
- Wide throat area results in smooth flow of carpet to the blades.
- Six shims for height adjustment and four throat adjustments for various carpets.
- Trims excess carpet at the wall, leaving just the right amount for tucking.
- To change blades, remove the blade carrier.
- Blades are easily accessible from the top of the blade carrier.
- Shims are relieved for easy reinsertion of the blade carrier, and each has four sockets for throat adjustment.
- Rounded wall runner for trimming vinyl sheet goods or cut pile carpets.
- Anti-friction boot prevents scratching when used to trim vinyl.
- Spring-loaded center knob for blade height adjustment.
- Takes slotted razor blades for trimming vinyl, or hook blades for trimming carpet.
- Troxell Super-Soft knee pads size regular/medium in royal blue color.
- Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
- Troxell Super-Soft knee pads size large in royal blue color.
- Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
- Troxell “Leather Head” knee pads, size: large.
- Durable neoprene construction with leather cover. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
- Slices glued-down carpet into strips for faster removal, and great for rough cutting carpet off roll.
- Comes with sharp, hardened steel point with precision slot to guide utility blade.
- Point punctures glued-down carpet for fast starts. As pushed it rides on subfloor, lifting carpet to the blade.
- Heavy-duty fiberglass handle adjusts from 50” – 85” for optimal angle. Takes hook or utility blades.
- Sharp, hardened replacement point for the No. 265 Stand-Up Cutter with precision slot for utility blade.
- Quickly punctures glued-down carpet for fast starts.
- As the point is pushed, it rides on the subfloor and lifts carpet to the blade where it is cut.
- Includes one each replacement point only. No blades are included.
- Silver metal corners for covering a sheet vinyl outside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
- Silver metal corners for covering a sheet vinyl inside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
- Gold metal corners for covering a sheet vinyl outside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
- Gold metal corners for covering a sheet vinyl inside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
- Moves appliances up to 800 lbs. using high pressure air jets, reducing risk of floor damage and injuries.
- Slide the load plates under the load, turn on the blower, adjust the lift control valve, and the air plates lift the load.
- Air plates glide the load over hard surfaces. Includes four polypropylene pads to move over carpet.
- Includes 2 load plates, 2 HP. Motor and strap, lift control valve, T-connector and hoses, 4 carpet pads, and carrying bag.
- Single carrying bag only for Crain No. 280 H.D. Air Lifter.
- Padded center compartment protects the motor
- Air plates and polypropylene carpet pads tuck in the sides, and hoses and other components in the bottom.
- Trim, contoured design saves space and is easily carried. Durable polyester canvas.
- 45° blade angle of this knife is optimal for scoring and breaking rigid core LVP/LVT.
- Elevated handle provides knuckle clearance.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Extra blades can be stored in the handle. Comes with 10 blades. Blades: No. 286C or No. 287.
- Specialty blades for No. 285 Personna LVT/LVP Knife.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
- Pack of 100 blades, incl. 10 "pocket packs" of 10 blades each. Blade dimensions: length: 1.625", width: .75", thickness: .025".
- Specialty blades for No. 285 Personna LVT/LVP Knife.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
- Blister card includes 10 blades. Blade dimensions: length: 1.625", width: .75", thickness: .025".
- Takes Accutec® wide-beveled LVP scoring blades.
- Long blade carrier provides knuckle clearance, while hook handle produces pressure and pulling power.
- Also takes utility blades, hook blades, and Crain No. 321 hook for tough vinyl.
- Pivots open for blade storage.
- Excels on carpets with zig-zag tufting including commercial loop pile and Berber carpets.
- Blade runs directly behind row guide, keeping it away from hydra-shift stopovers.
- Reduces shearing of yarns to produce better looking seams.
- Also works as a Z-bar or a vinyl molding trimmer.
- Pack of 100 Personna® heavy-duty utility blades which are individually wrapped in paper and packaged in a laminated paper box.
- These blades can be used in most standard utility knives that take heavy-duty utility blades.
- Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
- Blade dimensions: length: 2.40", width: .75", thickness: .025". Individually wrapped blades packaged in laminated paper box.
- A multi-purpose tool for cutting and hammering down tackless strip.
- Polished head includes 3 ½” blade and hammering head.
- Hickory hardwood handle is contoured for gripping.
- Durable Vaughan quality product made in the USA!
- Pack of 10 blades for the discontinued Crain No. 298 Top Cutter.
- When used with the Top Cutter, this elongated blade can double cut carpet from the face.
- For use with the Crain No. 298 Top Cutter only.
- Blade dimensions: length: 3.00", width: .745", thickness: .025".
- Great for rough cutting of carpet off the roll.
- Versatile design takes slotted razor, utility, or Crain No. 300Y blades.
- With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarns.
- Large thumb knob permits simple, fast blade changes.
- Pack of 10 replacement blades for the Crain No. 300 Loop Pile Cutter. Packaged in a plastic box with hinged lid that snaps shut.
- Blades have 2 holes for a blade screw on early models of the No. 300 (black plastic body), but also work in later models.
- When used in the No. 300, they cut the carpet from the backing, reducing the shearing of yarns and wadding up of carpet.
- Blades are reversible for added life. Blade dimensions: length: 2.31", width: .75", thickness: .025".
- Precision blade pockets on left and right side hold slotted blades without screws.
- Trims seam edges close to the carpet’s tufting to produce better seams.
- 30° blade angle cuts cushion-back carpets cleanly.
- Beveled front guide follows the carpet’s rows. Soft grip handle provides comfort and control.
- Offset blade clamp allows fast blade depth adjustment and blade changes. Takes standard slotted razor blades.
- Front guide has rounded notches to help find rows in difficult carpet including Berbers, hydrashift and commercial level loop.
- 30° blade angle cleanly trims the carpet's edges for seaming.
- Soft grip handle provides control and comfort.
- Includes base for cutting over pad or other carpet that protects material underneath.
- Blade carrier is adjustable in height so that it locks down on the rows of carpet.
- Dual blade pockets on left and right sides, and large thumb knob to lock in the blades.
- “Triple tight” 3 thumb knob construction helps produce accurate cuts.
- Versatile and durable carpet cutter with steel row guide for improved accuracy.
- Takes slotted razor, utility, or Crain No. 300Y blades. Dual springs hold the carpet down.
- With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarn.
- Steel foot plate reduces wear for long-term durability.
- Pack of 100 Personna® regular-duty (.015" thick) round-edge slotted razor blades.
- Reduced thickness fits older model Crain tools that take thinner blades (Crain No. 124, 301, 302).
- Not recommended for newer Crain tools designed for heavy-duty slotted blades (Nos. 308C/309C - .017” thick).
- Blades individually wrapped and come in a laminated paper box. Blade dim.: length: 2.25", width: .75", thick: .015".
- Pack of 100 Personna® heavy-duty (.017 thick) round edge slotted razor blades.
- Rounded corners of round edge blades ride on the subfloor without digging in and increasing resistance.
- Blades are individually wrapped in paper and are packed in a laminated paper box.
- Blade dimensions: length: 2.25", width: .75", thickness: .017".
- Pack of 100 Personna® heavy-duty (.017 thick) square edge slotted razor blades which are individually wrapped in paper.
- Square edge blades provide a sharp, precise point for starting a cut with the knife.
- Square edge blades cut to full depth when used in seam cutters such as Crain No. 301 or No. 302.
- Blades are packed in a laminated paper box. Blade dimensions: length: 2.25", width: .75", thickness: .017".
- Double-needle dividers with rounded radius arm and large wing nut.
- Legs span from ½” to 6” apart. Needles press fit into the legs.
- Rounded arm provides smooth adjustment and solid hold.
- Comes with two needles in the tool and two replacement needles.
- Pack of two replacement needles for The No. 310 Dividers.
- Approximately 7/8” long and 0.060” in diameter.
- Each needle has a sharp point for scribing.
- These needles press fit into either leg of the No. 310 Dividers.
- Accurately trims sheetgoods net to the wall.
- Adjustable front guide holds the material in position against the wall.
- Adjustable rear guide keeps the trimmer running parallel with the wall for smooth trimming.
- Low profile hand contours help to keep the tool flat against the floor in use. Repl. blades: No. 321.
- Pack of three hook blades for the No. 321 Vinyl Wall Trimmer.
- Reversible blade includes two cutting hook edges.
- Blades come in a plastic box with hinged lid for storage.
- Blade dimensions: length: 2.30", width: .50", thickness: .025".
- Pivots open by pressing the spring-loaded rear button to access the slotted razor blades.
- Contoured red handle includes knurling on both sides for improved grip.
- Large radiused fin behind the blade carrier for thumb pressure and improved control.
- This carpet knife takes slotted razor blades.
- 20 oz. claw hammer for hammering down and pulling up tack strip.
- Forged, induction hardened steel head includes magnetic nail holder.
- Durable fiberglass handle is jacketed for overstrike protection.
- Handle includes contoured grip. Fully featured and excellent value.
- Hand roller for vinyl with three rubber rollers.
- Rollers produce good pressure without scratching or scuffing.
- Rolls a 7 ½” section each pass. Recessed axle works close to walls without scratching.
- Twist-lock tube assembly adjusts handle length from 17” to 27”.
- Six foot straight edge for making seams in sheet vinyl and like materials.
- Precision edges are ground for straightness with accuracy of +/-.003”.
- Made from special spring steel that will return to its flat condition even after being bent.
- One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 6' x 3" x 1/8".
- Four foot straight edge for making seams in sheet vinyl and like materials.
- Precision edges are ground for straightness with accuracy of +/-.003”.
- Made from special spring steel that will return to its flat condition even after being bent.
- One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 4' x 3" x 1/8".
- Replacement blade for the No. 336 Undercut Saw for hand undercutting of wood door jambs.
- Blade includes studs for mounting to the bracket of the No. 336 Undercut Saw.
- Trapezoidal shape provides clearance.
- Includes 12” row of 10 point teeth on both sides. Made from high carbon steel for good blade life.
- Hand undercutting saw with heavy-duty wood handle, steel bracket, and replaceable 12” blade.
- Trapezoidal high carbon steel blade includes a row of 10 point teeth on both sides.
- Saw includes a front knob for working with both hands to increase cutting power.
- Good for cutting wood door jambs by hand. Replacement blade: No. 335.
- 8” duster brush made with durable blended horsehair bristles.
- Tends not to scratch on most floors.
- Wooden handle is very tough and impact-resistant.
- Bristle area: 8” long x 2 ½” wide. Handle length: 5”. Great for use with dust pan (Crain No. 666).
- One replacement blade for the Crain No. 338 Flex Undercut Saw.
- Flexible blade bends at the floor for hand undercutting wood door jambs.
- Both sides of blade have a 9 inch double row of staggered, ultra-fine induction hardened teeth.
- Blade provides easier starts, fast cutting, and smooth results.
- Trims the factory selvage, so the sheet can be accurately scribed and seamed.
- Insert the selvage edge in the guidance slot, and the blade is properly positioned.
- Simply pull the tool through the material and the selvage is removed.
- Replaceable U-shaped blade makes a clean, square cut.
- One each replacement blade for the No. 340 Selvage Trimmer.
- Trims the factory selvage so the sheet can be accurately scribed and seamed.
- U-shaped blade ensures a smooth, accurate cut.
- Trimmed edge will be perpendicular to the floor to match an adjacent edge.
- One each replacement blade for the No. 340 Selvage Trimmer.
- Trims the factory selvage so the sheet can be accurately scribed and seamed.
- U-shaped blade ensures a smooth, accurate cut.
- Trimmed edge will be perpendicular to the floor to match an adjacent edge.
- Includes one each replacement blade for the Crain No. 344 Score Tool.
- Marks a score line on plastic laminate or cementitious backer board materials.
- After scoring, the material breaks along the desired score line cleanly and easily.
- Blade includes two carbide tips and is reversible in the handle of the No. 344 Score Tool.
- Hand roller for plastic laminate installation.
- 3” wide solid rubber roller produces 30 – 45 PSI for positive bonding.
- Rubber roller material is non-marking.
- Offset handle and recessed axle allow the roller to work close to the wall without scratching.
- Seam roller for hand rolling vinyl with square edge and long nine inch wooden handle.
- Square edge and offset bracket allow the roller to work up close to walls.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
- Seam roller for hand rolling vinyl with square edge and shorter six inch wooden handle.
- Square edge and offset bracket allow the roller to work up close to walls.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
- Seam roller for hand rolling vinyl with round edge and long nine inch wooden handle.
- Round edge of this roller allows it to work up close to vinyl flash coving.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
- Seam roller for hand rolling vinyl with round edge and shorter six inch wooden handle.
- Round edge of this roller allows it to work up close to vinyl flash coving.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
- Top quality hand stripper with 12” long handle and zinc alloy head and blade clamp for durability.
- Blade clamp is fastened with 3 case hardened slotted head screws.
- Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
- Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
- Pack of 10 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
- The .020” thickness provides the right flexibility for fine floor prep. work.
- These blades work especially well for removing adhesive residue from concrete floors.
- Vial of ten blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
- Bulk pack of 100 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
- The .020” thickness provides the right flexibility for fine floor prep. work.
- These blades work especially well for removing adhesive residue from concrete floors.
- Vial of 100 blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
- Hand saw for removing old or damaged grout. Angled steel bracket keeps hand from contacting the floor.
- Comes with carbide blade coated with carbide grit for cutting out grout between tiles. Minimum grout joint width 1/8”.
- Comes with steel-toothed blade for heavy cleanout work after using the carbide blade.
- Both blades can be used for thick grout joints or using steel blade to protect walls when sawing near walls.
- Replacement blades for the Crain No. 353 Grout Saw. Minimum grout joint width 1/8”.
- Includes one carbide blade coated with carbide grit, and one steel-tooth blade.
- Steel-toothed blade can be used along with carbide blade for wide grout lines.
- Steel-toothed blade can be used along with carbide blade to protect walls when grout line is close to wall.
- Leather pocket pouch sized 4 ½” wide to slide easily into a pants back pocket.
- Small items like a knife or row finder wedge securely in the 3” wide x 4 ½” deep inner pocket.
- Outer flap hooks over the pants pocket to protect it and help keep the pouch from sliding out.
- Durable stitched and riveted construction. Includes 2” belt slots. Outer dimensions: 4 ½” x 7 ½”.
- Tungsten carbide hole saw cuts clean 1 3/8” holes for pipe clearance.
- Works well on ceramic and soft-bodied quarry tile.
- Replaceable ¼” masonry bit holds a center. Internal spring ejects the cut piece out.
- Works with a drill (not included).
- Top quality hand stripper with 20” handle for two handed operation and additional reach.
- Head and blade clamp made from durable zinc alloy. Blade clamp fastens with 3 case-hardened slotted screws.
- Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
- Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
- Steel body includes a wedge with forked edge on one end and a push pin on the other.
- For hinges that are open at the bottom, insert the pin and tap to push the pin up.
- Otherwise, insert the fork-shaped edge under the pin and hammer to lift the pin.
- Once lifted, the fork is used to lift the pin all the way out.
- Wedge-shaped tool with forked shaped edge and capture spring to hold the pin.
- Capture spring holds the greasy pin on the fork so it won’t fall on the carpet.
- For hinges that are open at the bottom, insert the pin end and tap to force the pin up.
- Otherwise, insert the fork-shaped edge under the pin and hammer wedge up.
- Double-ended tool with a pointed end for cut pile and a beveled end for loop pile.
- Pointed end has a narrow point to penetrate the row and a wider conical surface to spread the tufts.
- Beveled end spreads loops of loop pile and Berber carpets without snagging.
- Reduces nap shear. Made from solid steel and nickel plated.
- Ultra-straight spring steel row finder with smooth, rounded notches.
- Rounded ends easily enter the rows of Berber and loop pile carpets without catching loops.
- Move back and forth in a sawing action to open the row.
- Textured plastic handle provides good grip.
- Ultra-straight spring steel row finder with smooth, rounded notches.
- The pointed ends easily enter the rows of dense cut pile or plush carpets.
- Move back and forth in a sawing action to open the row.
- Textured plastic handle provides good grip.
- Sturdy steel frame with 3 ½” throat depth and high-impact plastic pistol grip handle.
- Comes with steel cutting blade.
- Frame accepts 10” or 12” blades. Blades are mountable in line with frame or at 90°, 180°, or 270° angles.
- Frame is plated to resist rust.
- Includes two each 12” carbon steel hacksaw blades for use with No. 368 Deluxe Hacksaw.
- Blades have 32 teeth per inch.
- Good for cutting aluminum cap metal and other accessory trims using the No. 176 Miter Box.
- Can also be used to cut mild steel, cast iron or copper.
- Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
- Top portion adjusts the needle height based on material thickness.
- Bottom portion adjusts offset between needle the guide being used. Offset range: about 2”.
- Includes rounded end guide for walls and bottom guide for seam scribing. Replacement needles: (No. 371).
- Includes one replacement needle for No. 370 Recess Scriber or No. 375 18” Scribing Tool.
- Needle diameter: approx. 0.063”
- Needle length: 1 1/2”
- Needle is sharp on one end for scribing.
- Accurately scribes longer widths from 2” to 16”. Needles are replaceable (No. 371).
- Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
- Top portion adjusts the needle height based on material thickness.
- Bottom portion adjusts offset from the rounded end guide for walls or bottom guide for seam scribing.
- Stand-up telescoping tube scraper with wide 8” blade for heavier removal work.
- Telescoping tubular handle adjusts from 39” to 59” using a simple twist lock mechanism.
- Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
- Great for stand-up scraping work. Comes with a No. 376 .037” thick blade, and blade cover.
- Shorter version of the Big Scraper with telescoping tubes and wide 8” blade for use while kneeling.
- Telescoping tubular handle adjusts from 19” to 26” using a simple twist-lock mechanism.
- Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
- Great to scrape wider sections while kneeling. Comes with No. 376 .037” thick blade, and blade cover.
- Pack of 3 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
- Wide 8” blade removes the widest section of material of any Crain scraper blade.
- Good for hand scraping of heavier adhesive residue.
- Comes in plastic vial of 3 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
- Pack of 9 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
- Wide 8” blade removes the widest section of material of any Crain scraper blade.
- Good for hand scraping of heavier adhesive residue.
- Comes in plastic vial of 9 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
- Forged steel bent leg with sharpened point and adaptable straight leg for marking.
- Adaptable straight leg takes a scriber with needle or inking leg.
- Scribes up to 14” span. Bent center leg permits easier scribing along walls.
- Knurled steel thumb screws & needle holders. Repl. needle: No. 129. Inking leg: 1380-P
- Rounded body fits comfortably in the user’s hand.
- Bent leg and removable straight leg spans up to six inches.
- Adjusts using a folding thumbscrew. Bent leg allows easier wall scribing.
- Both legs have knurled steel caps to hold replacement needles (No. 129).
- Hand scraper with metal knob handle for hammering with a rubber mallet to scrape hard spots.
- Knob also has rounded edges to fit the palm.
- Long 18” handle, steel reinforced head, and blade clamp with three case hardened screws.
- Comes with a wide 5” blade (No. 391) with .037” thickness of our Big Scraper blades for heavy removal work.
- Pack of ten replacement blades for the Crain No. 390 Inertial Scraper.
- Wide 5” blades are made with the same .037” thickness as our heavy-duty Big Scraper blades.
- Stout blades can scrape up hard spots.
- Come in a plastic vial of ten blades with resealable cap.
- Replacement carbide wheel for Crain Nos. 030, 031, 032X, and 033X Ceramic Tile Cutters.
- Wheel dimensions: approximately 1/2” in diameter x .075” thick.
- Wheel center hole: 1/4” diameter.
- Replacement fasteners including a steel bushing, washer, screw and lock nut are included.
- Converts between 4 most needed Phillips and slotted screwdriving tips, and provides 2 nutdriver sockets.
- Includes #1 and #2 Phillips tips, 3/16" and 5/16" slotted tips, and 1/4" and 3/16" nutdrivers
- Made with high-impact plastic ribbed handle for sure grip.
- Heat-treated alloy steel socketed drive shaft.
- Square leather pouch hangs from the belt.
- Deep 3 ¾” x 5 ½” rectangular pocket with 1” wide opening to quickly insert larger items.
- 2 ¼” wide slots go onto most belts.
- Durable riveted construction. Outer dimensions: 4 ¼ x 7”.
- 1/16” open x 1/16” flat x 1/16” deep square-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade. Add "L" to the No. 420 for left-handed model (i.e. No. 420L).
- 1/16” open x 1/16” flat x 1/16” deep square-notched trowel. Blade is notched on the left side of the blade for left-handed users.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/16” open x 1/4” flat x 1/16” deep V-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/16” open x 1/32” flat x 1/32” deep U-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade. Add "L" to the No. 422 for left-handed model (i.e. No. 422L).
- 1/8” open x 1/16” flat x 1/8” deep V-notched trowel.
- The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade. Add "L" to the No. 423 for left-handed model (i.e. No. 423L).
- 1/8” open x 1/16” flat x 1/8” deep V-notched trowel. Blade is notched on the left side of the blade for left-handed users.
- The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 3/32” open x 3/32” flat x 3/32” deep V-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/4” open x 3/16” deep V-notched trowel.
- The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/4” open x 1/4” flat x 1/4” deep square-notched trowel.
- The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/2” open x 1/2” deep V-notched trowel.
- The front edge is square and notched for "cutting in" or spreading adhesive or mortar in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/4” open x 1/4” flat x 3/8” deep square-notched trowel.
- The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/2” open x 1/2” flat x 1/2” deep square-notched trowel.
- The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/8” open x 1/16” flat x 1/8” deep U-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/16” open x 1/16” flat x 1/16” deep V-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 3/16” open x 1/2” flat x 1/4” deep V-notched trowel.
- Front edge is square and is notched for "cutting in" or spreading adhesive in tight areas like corners.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 1/8” open x 1/16” flat x 1/8” deep V-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- 4” wide x 14” long trowel with no notches.
- Useful for spreading patch.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade.
- Made with two pivoting axles each with seven steel star wheel wheel rollers (14 total).
- As the roller is moved forward and backward, the axles pivot outwardly then inwardly.
- This action mixes carpet fibers and pulls the seam edges together.
- Star wheels press the carpet’s backing into the adhesive.
- Solid axle with ten steel star rollers.
- Star wheels effectively press the carpet’s backing into the hot melt adhesive.
- Welded steel handle bracket is plated.
- Rounded handle fits well in the palm of the hand.
- Made with wide ribbed roller sections.
- Wide surface area on the ribbed surfaces protect delicate fibers better than star wheels.
- Ribs produce concentrated pressure forcing carpet backing into the adhesive.
- Best roller for fine denier saxony, plush, and velvet carpets.
- Solid axle spans six inches wide and has 18 steel star wheel rollers.
- Provides adequate pressure even with 6” tape.
- Steel bracket and handle stem are welded and plated for durability.
- Hard plastic handle is rounded to fit well in the palm of the hand.
- Recessed trigger for length adjustment in five settings from 17¾" to 21¾".
- Visual pin depth dial provides nine different depth settings.
- Power rods through pin plate provide support and improved force transfer.
- Three nap grips, pin plate with 16 pins, standard thickness bumper.
- Long 1 7/8” blades cut wide architectural strip straight in a single cut.
- Cuts regular strip straight or diagonally in a single cut.
- Blade stabilizer prevents splaying of the blades to increase cutting efficiency.
- Handle includes blade storage, travel adjustment, and locker for closing in storage.
- Package of 12 replacement blades for the Crain No. 450 Deluxe Strip Cutter.
- Cuts wide architectural strip straight in one cut.
- Cuts regular strip straight or diagonally in one cut.
- Packaging includes clear plastic box that snaps shut for storage.
- Heavy-duty cloth bag slips over standard sized tack strip boxes.
- Extra protection prevents boxes from tearing open to protect the strip.
- Reinforced end panel with heavy-duty zipper and double-stitched handle.
- Projects a professional image and improves efficiency.
- Includes three 2 ½” rows of star wheels mounted on a durable steel body.
- Produces pressure on the seam to press the backing into the adhesive.
- The three rows of star wheels mix yarns to reduce visibility.
- Long, rounded body is optimal for hand pressure.
- Economical impact-resistant safety glasses.
- Soft sides create comfortable fit against the face.
- Include elastic strap.
- Clear direct ventilated frame permits peripheral vision.
- Angled handles easily position the blades for trimming off carpet tufts.
- Extra-long 3” blades.
- Finger loops are oversized for large fingers.
- Right side loop accommodates multiple fingers for easy activation.
- Includes the driving head, tail block, transfer tube and head case.
- Head case additionally holds an Auto-Lok tube and three extension tubes (not included).
- Head case has wheels for easy transport.
- Head case is made from tough blow-molded plastic with recessed latches and handles.
- Includes three extension tubes, Auto-Lok tube, and tube case.
- Tube case has recesses that hook on our head cases with wheels for easy transport.
- Made from tough yet lightweight high-density blow-molded plastic.
- Recessed latches and handles improve durability.
- Includes the tube case only. Holds an Auto-Lok tube and up to three additional extension tubes.
- Tube case has recesses that hook on our head cases with wheels for easy transport.
- Made from tough yet lightweight high-density blow-molded plastic.
- Recessed latches and handles improve durability.
- Power handle has built-in stretch lock for partial stretches.
- Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
- Pin depth adjustment knob adjusts without screws or screwdrivers.
- Double case design distributes weight and provides room for extra components. Built-in wheels for transport.
- Includes both head and tube cases.
- Holds the driving head, transfer tube, tail block, Auto-Lok tube, and 7 more extension tubes.
- Head case includes wheels, and tube case hooks on the head case for easy transport.
- Cases split to distribute weight. Also holds Roberts 10-239.
- Power handle has built-in stretch lock for partial stretches.
- Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
- Pin depth adjustment knob adjusts without screws or screwdrivers.
- Space saving single case design includes wheels for transport.
- For use on Crain No. 499 and 500 Power Stretchers.
- Recommended when stretching Berber, loop pile, and low-level commercial carpets.
- Wire nap grips are less likely to pull or snag loops.
- Installs easily. Nap grips are replaceable.
- Provides ultra-fast length adjustment for a connected train of extension tubes!
- Push back on the tubes to extend, push buttons and pull back to shorten.
- Adds up to 4 feet 8 inches to the stretcher in convenient 1½ inch increments.
- Works with standard-sized diameter tubes.
- Adds up to 4 feet 8 inches of length.
- Holes are punched rather than drilled for durability and precision.
- Buttons are rounded for smooth tube adjustment.
- Works with other standard size diameter poles.
- Includes the head case only.
- Holds the driving head, transfer tube, tail block, Auto-Lok tube, and up to 3 additional extension tubes.
- Case has wheels for easy transport.
- Tough yet lightweight blow-molded plastic. Latches and handles are recessed for added durability.
- Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
- Visual pin depth dial provides nine settings for various carpets.
- Power rods through pin plate provide support and improved force transfer.
- Three nap grips, pin plate with 16 pins, standard thickness bumper.
- Provides a full and uniform stretch across the stair tread.
- Begin at the top of the stairs and work downwards.
- Stretch then tuck the stair below. Prevents sore knees!
- Comes with carrying case.
- Top hand lever permits fast extension or retraction of the stretcher tail.
- Bottom floor lever unlocks when the stretcher head is lifted off the floor, allowing head to extend or retract.
- Floor lever includes lock pin to lock the floor lever as desired (including for transport).
- Works with other Junior Power Stretchers with standard size poles (1 3/4" inside diameter).
- Replacement part for No. 512 Mini-Stretcher or No. 514 Mini-Stretcher w/Seam Att.
- When attached, works as seam repair stretcher by pulling carpet together.
- Can also be used for pattern matching when attached.
- Top knob provides fast adjustment of pin depth.
- Dual pivoting gripper heads for precision pattern matching.
- Restretch with the open top wall blade for fast tucking
- Quick change pushbuttons for attaching gripper heads and wall blade on either end.
- Comes with carrying case. Tall seam repair legs are sold separately (No. 519).
- Lightweight and rustproof.
- Adds up to 4 feet 8 inches of length to a stretcher in 4 inch increments.
- Score line on inner and outer tubes to align buttons with holes during length adjustment.
- Works with other standard sized tubes.
- Lightweight and rustproof.
- Adds up to 8 feet 8 inches of length to a stretcher in 4 inch increments.
- Score line on inner and outer tubes to align buttons with holes during length adjustment.
- Works with other standard sized tubes.
- Stretches carpet across the stair tread and forms it around the nosing.
- Hook the teeth in the carpet near the nosing, then pull down on the handle.
- A pulling action is generated that stretches the carpet.
- Bottom edge tucks up under the nosing. Recesses allow easy stapling.
- Two tall seam repair legs only for Crain No. 515 Mini-Stretcher.
- They create a 9” high by 10” wide working area to run a seaming iron beneath the stretcher.
- Legs include quick release pin to connect to the stretcher and holes for fastening to pin plate assembly.
- Stretcher and pin plate assemblies are sold separately.
- 60° of free swivel for patterned carpet. Head locks at straight, 15° or 30° angles.
- Power handle has built-in stretch lock for partial stretches.
- Comes with Lever Extension tube, 3 extension tubes, and transfer tube.
- Comes with folding tail block. Available in double cases only.
- For use on Crain No. 520 Swivel-Lock Stretchers.
- Recommended when stretching Berber, loop pile, and low-level commercial carpets.
- Wire nap grips are less likely to pull or snag loops.
- Installs easily. Nap grips are replaceable.
- Includes three replacement blades for the Crain Seammate doorway seaming tool.
- Each blade has a 23” long razor sharp edge for scoring the carpet’s backing at the doorway seam location.
- Marks a straight line on the carpet’s backing which can be trace cut with a knife.
- Blade dimensions: length: 23.27", width: .560", thickness: .020".
- Wider head with 4 gripper inserts and an extra row of pins moves more carpet each kick.
- Extra thick bumper absorbs more impact for comfort.
- Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
- Visual pin depth dial provides nine settings for various carpets.
- Gouges out the back side of the base material for tight wrapped corners.
- Double-tipped reversible blade includes both “V-tip” and “U-tip”.
- Use V-tip for tight 90° corners, and U-tip on fuller corners.
- Gouging depth is adjustable using a simple set screw.
- Double-tipped replacement blade only for the No. 530 Rubber Base Gouge.
- Gouges out the back side of the cove base to produce tight wrapped corners
- Use V-tip for tight 90° corners, and U-tip on fuller corners.
- Reversible blade conveniently sockets into the handle.
- Forms a 5/32” wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners.
- Groove removes excess fullness at the corner that can cause the base to pucker and gap.
- Grooving depth adjustable using knurled steel nut. Rounded wood handle comfortably fits the palm.
- Blade is replaceable and resharpenable (No. 533).
- Includes one each replacement blade only for the Crain No. 532 Topset Gouge.
- Forms a 5/32” wide groove on the back side of vinyl or rubber cove base.
- Produces tight-wrapped corners by reducing excess fullness which can cause gaps and puckering.
- Blade is resharpenable.
- Three foot aluminum straight edge useful for most carpet installation purposes.
- Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
- Includes 45° angle on one end, and a hanging hole on the other.
- Economical and lightweight. Dimensions: 36" long x 2 1/2" wide x 3/16" thick.
- Six foot aluminum straight edge useful for most carpet installation purposes.
- Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
- Includes 45° angle on one end, and a hanging hole on the other.
- Economical and lightweight. Dimensions: 72" long x 2 1/2" wide x 3/16" thick.
- Top quality compound leverage metal snips great for making straight cuts in aluminum accessory trims.
- Alloy steel blades make up to 1 11/16” long cuts and provide durability for long term performance.
- Handles include “soft-touch” grips which reduce twisting in the hand under forceful squeezing.
- Can cut sheet metal when necessary.
- Economical hammer tacker for stapling pad takes 5000 series pad staples, ½” crown x 5/16” leg.
- Bottom-loading magazine makes loading staples or clearing jams easy.
- All-steel driving mechanism is durable.
- Thick rubber grip provides comfort and control.
- Adjustable stapling tool that works close to walls generally within the width of one board.
- Adjusts to different engineered plank thicknesses from 3/8” to 3/4” with the adjustable foot plate.
- Insert a staple in the channel and hammer into the subfloor using the unique offset driver.
- Tool includes separator for separating individual staples. Takes 18 gauge (1/4" crown) staples.
- Replacement carbide-tipped blade for use on Crain No. 545 or No. 555 undercut saws.
- 36 tooth blade approximately 5 ½” diameter blade.
- For use cutting wood base, moldings, door jams and drywall only.
- Not for use in cutting metal, masonry, ceramic tile, or stone.
- Steel pull bar designed to take heavy hammering when necessary to pull planks together.
- Boxed “knuckle-shaped” hammering head is welded to the body.
- 3/16” thick body is made 3” wide to reduce bending down the length as tool is hammered.
- 16 1/2” long overall for 14 1/2” working room when used near wall. Felt pads reduce scratching.
- Maintains expansion gap between the wall and the plank even when the wall is undercut.
- With the V-shape, one end goes in the gap, and the other braces on the face of the plank.
- Two ends have different thicknesses, one 3/16” and the other 1/4” for manufacturer’s specifications.
- Eliminates tipping problems with other spacers. Comes in a pack of 10 spacers.
- Block for tapping and moving planks while also protecting the edges of the plank.
- Block is sized 3” wide x 7” long x ¾” thick. Bottom is relieved on a side and an end.
- Put the block on a plank at a relieved edge and it can tap the plank against its outer edge.
- Reduces risk of chipping the plank. Large plastic handle makes it easy to move and position.
- Used to space planks from the wall to form the expansion gap necessary with plank floors.
- Provides variable spacing when the wall adjacent to the planks is not straight.
- Large threaded pushrod is turned using the oversized ergonomic twist knob.
- Knob has a steel hex insert for a hex wrench. Pressure pad has rubber insert to protect walls.
- Pulls planks together across lengths of up to 19 feet.
- Nylon strap coils internally as strap is retracted and stays out of the way.
- Long base hooks onto planks even under toe spaces.
- Includes large knob for rapid retraction after clamping is complete.
- Adaptor to Crain No. 565 18’ Strap Clamp holds bullnose in place as the glue dries, or for hands-free nailing.
- Slides on the base of the clamp to create a large, radiused clamping surface conforming to 1” bullnose material.
- Radiused clamping surface includes a felt pad to prevent scratching the bullnose.
- Strap Clamp and adaptor sold separately.
- 113/4” solid plastic block with a long, U-shaped handle for greater control.
- Use with a hammer to tap the sides or ends of the boards to eliminate gaps. Reduces risk of damage.
- Relieved on one side and one end to fit over the tongue of the board and contact squarely against the side.
- Dimensions: 3” wide x 113/4’ long x 3/4” thick.
- Compact, 8 AMP undercut saw works best for fast undercutting of jambs. Also cuts walls and inside corners.
- Height of cut adjustable from flush to 1” above floor level. Handle folds for undercutting toe-kicks.
- Dual-angle depth gauge allows cutting at “straight on” or 45° angles. Maximum depth of cut: 1 1/4".
- Comes with carbide blade, carrying case, blade wrench, and instructions.
- Lifts the LVP plank to the angle where it can be tapped and locked tight.
- Large upper plastic block contacts just below the face of the plank. Lower plastic contact plate extends to contact the core.
- Comes with three 1mm shims and two 3mm shims for planks up to 10mm thick.
- Extra contact plates and shims sold separately.
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
- Oval head seats in metal moldings with countersunk holes.
- Semi-square body compresses against pre-drilled 1/8” hole.
- Fastener dim.: 1/8” dia. X 5/8” long. Hole: 1/8” dia. x 3/4” deep.
- High profile body more easily spans over stretcher tubes, plus thicker rubber bumper.
- Recessed trigger provides 5 length settings from 18 ½” to 22 ½”.
- Visual pin depth dial provides nine depth settings for various carpets.
- Power rods support the pin plate and improve force transfer to the carpet.
- Designed specifically to hold Duo-Fast No. 5418 Electric Tacker Staples.
- Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
- Protects boxes and staples in the tool box.
- Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
- Designed specifically to hold Duo-Fast® No. 7512 Hammer Tacker Staples.
- Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
- Protects boxes and staples in your tool box.
- Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
- Unique thermoplastic coating and precision ground “sharp point” (SP) 60° angle points.
- Efficiently penetrate hardwoods for greater holding power.
- Preferred for use in Crain electric tackers for reduced misfiring and jamming.
- 9/16” Leg - 3/16” crown - 20 GA. Shur-Fast® is a registered trademark of the Shur-Fast® corporation.
- Precision glue tip only for popular glue guns at an upright angle in a convenient pulling motion.
- Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
- During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
- Standard thread (7/16" - 20) fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes.
- 1/4” diameter nozzle with crimped end. Good for seam edge sealing.
- Thin opening (1/32” high x 7/32” wide) delivers narrow cross section of glue.
- Works in Crain Nos. 203, 204 or 207 Glue Guns or others with standard thread.
- Thread size: 7/16" major diameter- 20 threads per inch.
- Extended 1/8” tube (.085” inside diameter) nozzle.
- Works well for sealing the edges of carpet seams.
- Works in Crain No. 203, 204 or 207 Glue Guns or others with standard thread.
- Thread size: 7/16" major diameter- 20 threads per inch.
- Ruggedized control board includes electronic sensor that fires in response to motion of a tough sliding trigger.
- Eliminates the delicate mechanical microswitch that frequently required repair. Powerful 11 AMP solenoid drives into hardwoods.
- Long, slender nose more easily parts yarns and penetrates down to the backing for stapling.
- Short height, narrow profile, and rounded cap help it get into tight areas.
- Professional grade dust pan stamped from a single sheet of 20 gauge steel.
- Beveled lip is 12” wide for sweeping in debris.
- Formed with large corrugated ribs in the pan and at corners for extra stiffness and durability.
- Painted blade with baked-on enamel finish.
- Cuts plank flooring materials up to ¾” thick. Comes fully assembled.
- Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
- Includes wheels allowing the cutter to be easily moved from a kneeling position.
- Movable fence positions planks for straight or 45° diagonal cuts plus cut guide for repeat cuts
- Cuts carpet tiles, soft vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Works on materials up to ¾” thick.
- Includes wheels allowing the cutter to be easily moved from a kneeling position.
- Movable fence and tile guide can be set for repetitive straight or diagonal cuts.
- Comes fully assembled. Repl. blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 676.
- Cuts plank flooring up to 3/4” thick. Cuts up to 9” wide planks.
- Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
- Movable fence positions the material on either side of the blade for increased blade life.
- Comes fully assembled. Replacement blade: No. 681 9” Wood Cutter Blade.
- 25 foot long 16 gauge 3 conductor grounded extension cord.
- Constructed for use with power tools indoors or outdoors.
- Rated for usage up to 13 AMPs at 125 volts.
- Plug and receptacle are molded on the cordage for durability.
- One each steel replacement pin for the No. 686 Stand-Up Carpet Peeler.
- This pin is driven beneath the carpet and peels it back using the leverage of the tool.
- Made from hardened steel with sharp point.
- Easily punctures and gets beneath glued-down carpet.
- Hardened, high-carbon steel blade has a 6” long sharpened edge.
- Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
- Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
- Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
- Hardened, high-carbon steel blade has a 6” long sharpened edge.
- 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on side only.
- Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
- 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
- Hardened, high-carbon steel blade has a 10” long sharpened edge.
- Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions 3” tall x 10” wide x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
- Hardened, high-carbon steel blade has two 10” long sharpened edges, providing double the blade life.
- Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 3” wide x 10” long x .079 thick. Sharp edge is ground to a 30° bevel on both sides.
- Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
- 3” width produces a stiffer blade for removing hard-setting adhesive residues.
- Good for removing epoxy adhesives, thin-set mortar, or cement-based patch.
- Dimensions: 3” tall x 16” wide x .079” thick. Sharp edge ground to 30° bevel on one side only.
- Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
- 5” width produces a blade with more flex for removing soft-setting adhesive residue.
- Good for removing latex or urethane-based adhesives, or gypsum-based patch.
- Dimensions: 5” wide x 16” long x .079” thick. Sharp edge ground to 30° bevel on one side only.
- Power Channel construction produces forward stripping blade motion with more focused energy.
- Cam action of the 1 HP motor is channeled straight ahead using steel channels and ball bearings.
- Blade carrier forms ultra-low blade angle allowing the blade to get beneath the material to be removed.
- Includes 5 1/2” x 3 1/8” x 1/4” Spud Blade for light tile and wood removal, 3” x 10” multi blade, and 35 lb. weight.
- Heavy-duty extra-thick stripper blade for removal of ceramic tile or wood floors.
- Narrow 3 1/8” ground edge takes up narrow sections as is often required on wood floor takeup.
- Long 5 1/2” body provides reach to prevent the blade carrier from contacting surrounding material.
- For use on the Crain No. 710 Power Stripper only. Dimensions: Length: 5 1/2" x Width: 3 1/8" x 1/4" thick.
- English size #12 (U.S.A. size #0) small open-end sewing thimble.
- Works well on small-sized fingers.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the finger and exposes fingertip for gripping.
- English size #13 (U.S.A. size #00) medium open-end sewing thimble.
- Works well on medium-sized fingers.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the finger and exposes fingertip for gripping.
- English size #14 large open-end sewing thimble.
- Works well on large-sized fingers.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the finger and exposes fingertip for gripping.
- Extra-large open-end sewing thimble.
- Works well on the thumb.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the thumb and exposes the end of the thumb for gripping.
- Accepts economical 8” long scraper blades for Crain No. 375 Big Scraper (No. 376 or No. 377).
- Excellent solution for light stripping such as adhesive or sheet vinyl.
- Bolts onto the blade carrier for Crain No. 710 Power Stripper or No. 718 Power Scraper.
- Blade clamp fastens with 4 hardened slotted head scraper screws. Heat treated and plated.
- Light and highly maneuverable machine with ½ horsepower motor can take up heavy adhesive residue, vinyl or VCT.
- Power channel construction forces the blade forward with more focused energy.
- Collapses quickly for easy carrying. The all-steel frame and handle provides rigidity and durability.
- Includes No. 701 4" x 6" Vinyl Blade, No. 705 3" x 10" Multi-Purpose Blade and narrow No. 719 3½" x 3¾" Thin Spud Blade for tough take ups.
- Hardened, high-carbon steel blade has a 3 1/2” sharpened edge.
- Takes up a narrow section of material. Works well on tough take-up jobs because it reduces resistance.
- Works on Crain No. 710 or No. 718 stripper machines.
- Dimensions: 3 3/4" tall x 3 1/2" wide x .079" thick. Ground to a 30° bevel on one side only.
- Slim body hinges open for access to blade storage.
- Takes slotted razor blades.
- Body includes knurling on both sides for improved grip.
- Fin behind the blade carrier for thumb pressure improves control.
- Slotted razor blade carpet knife with rear-loading magazine for quick access to blades.
- Loosen the folding thumbscrew to release the magazine.
- Wide contours for more open, less constricted ergonomic grip.
- Precision blade holder holds blades tight at varying blade extension when needed.
- Slotted razor blade carpet knife pivots open for quick access to blades.
- Loosen folding thumbscrew, and the knife pivots open.
- Knife body features wide contours for more open, less constricted ergonomic grip.
- Precision blade holder holds blades tight at varying blade extension when needed.
- Utility or hook blade knife with hinged body that opens rapidly using a double-lead thumbscrew.
- Body can be opened by rolling the wheel across a surface for access to blade storage.
- Contoured for enhanced grip with precision blade holder to hold blades tight.
- Comes with plastic blade carrier that fits inside a pocket.
- A utility blade knife that folds for storage in your pocket.
- Durable blade holder locks rigidly.
- When opened, body locks rigidly and reliably.
- Body is contoured for gripping and includes a blade storage compartment.
- Classic utility or hook blade knife with knurled body for solid grip.
- Compact design and precision blade holder for detailed cutting in sheet vinyl materials.
- Pivots open for blade storage using the folding thumbscrew.
- Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook).
- More knurling up front plus finger contours for better grip and precise cutting.
- Pivots open quickly for blade storage by loosening the folding thumbscrew.
- Replacement blades are easily removed by a teeter-totter action generated by internal ridges.
- Precision blade clamp with magnet takes hook or utility blades.
- Slim profile and heavy knurling on the body and up front provide better grip for precise cutting.
- Precision blade clamp with magnet takes standard slotted razor blades (Crain No. 308C).
- Extra blades are easily retrieved from storage in the body by loosening the folding thumbscrew and pivoting open.
- Blades are easily removed by a teeter totter action generated by internal ridges.
- Relieved blade holder exposes a longer cutting surface of the slotted razor blade.
- Cuts thick carpet pad more efficiently.
- Handle is angled upward to prevent dragging of the knuckles on the pad.
- Body pivots open for blade storage by loosening the folding thumbscrew.
- Flameless electric heat gun producing hot air up to 750°F for softening, forming and cutting sheet vinyl and VCT.
- Adjustable intake cover adjusts temperature from 500°F - 750°F. Fan output is 27 CFM.
- 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
- Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
- Carrying case only for Crain No. 745 and No. 995 Deluxe Heat Guns.
- Also holds all previous Nos. 740 & 990 Crain Deluxe heat guns (red aluminum housing).
- Custom formed interior supports and protects the heat gun in transportation and storage.
- Made with dual latches, piano-style hinges, and recessed handle for durability.
- Economical hammer tacker for stapling pad takes 7500 series pad staples, 15/32” crown x 3/8” leg.
- Bottom-loading magazine makes loading staples or clearing jams easy.
- All-steel driving mechanism is durable.
- Thick rubber grip provides comfort and control.
- Inexpensive 1200 watt heat gun produces adjustable hot air from 250° - 1000°F.
- Temperature is adjustable by turning a large knob at the back of the gun.
- Three-position switch controls the power and amount of air output at high, low or power off.
- Pistol-grip handle is designed to stand the gun upright to prevent damaging the floor.
- 21/8 inch long, 16 gauge straight sewing needles.
- Made especially for carpet seaming.
- Rounded on the eyelet end, sharp on the other.
- Sold in pack of 25 needles only.
- 3 inch long, 16 gauge straight sewing needles.
- Made especially for carpet seaming.
- Rounded on the eyelet end, sharp on the other.
- Sold in pack of 25 needles only.
- 4 inch, 17 gauge curved sewing needles.
- Sometimes called “mattress needles”, but also good for sewing carpet.
- Rounded on the eyelet end, sharp on the other.
- Sold in pack of 12 needles only.
- Three ply waxed 100% polyester hand stitching thread.
- Color is natural (beige) similar to the color of carpet backing.
- Wax coating passes smoothly through the material being sewn.
- Stretches more than linen thread, which may show more seam when used for that purpose.
- Waxed three cord natural linen thread.
- Wax coating helps thread pass smoothly through the carpet being sewn.
- Color is natural (beige) similar to the color of the carpet’s backing.
- Works well for hand sewing carpets including seams.
- Extended spindle, low-profile head, and flush-mounted blade cuts up to inner wall of a toe-kick.
- Hinged depth adjustment plate has five settings for common underlayment thicknesses including 1/4", 3/8", ½", 3/8" or ¾".
- Comes with No. 787 3 3/8" Carbide-Tipped Blade for wood cutting. No. 789 Toe-Kick Saw Diamond Blade sold separately for cutting out tile or grout.
- Clutch mechanism that may disengage to reduce kickback.
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
- Oval head seats in metal moldings with countersunk holes.
- Semi-square body compresses against pre-drilled 1/8” hole.
- Fastener dim.: 1/8” dia. X 7/8” long. Hole: 1/8” dia. x 1” deep.
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
- Oval head seats in metal moldings with countersunk holes.
- Semi-square body compresses against pre-drilled 3/16” hole.
- Fastener dim.: 3/16” dia. X 7/8” long. Hole: 3/16” dia. x 1” deep.
- Replacement carbide-tipped blade for Crain Model No. 775, 785 or No. 795 Toe-Kick Saws.
- 3 3/8” diameter with 18 carbide teeth and precision countersunk arbor to flush mount blade screw.
- Cuts to fixed depth of 3/4” using the saw.
- For cutting wood only. Do not use on any metal, ceramic tile, brick, or stone materials.
- 2 3/4” diameter carbide-tipped blade for use on Crain No. 785 and No. 795 Toe-Kick Saws only.
- When used on these saws, it cuts to a shallower fixed depth of 3/8”. For cutting wood only.
- 16 carbide teeth, countersunk arbor for flush mounting the blade screw, and two drive holes.
- Not for use on Model No. 775 Toe-Kick Saw. Don’t use on metal, ceramic tile, concrete or stone.
- Accessory diamond blade for use on Crain Model No. 775, No. 785, or No. 795 Toe-Kick Saws.
- 2 5/8” diameter continuous rim diamond dry cutting blade for cutting ceramic tile or removing grout.
- Cuts to fixed depth of 3/8” using the saw.
- For use on ceramic tile, brick, concrete, stone, or removing grout only. Not for use on metals.
- Economical steel-toothed blade for discontinued Crain Model Nos. 800 and 810 Super Saws.
- Includes 100 steel teeth.
- Arbor hole countersunk for flush mounting blade screw. Body has 2 drive holes for blade driver.
- For use on wood or dry wall only. Do not use on any metal, ceramic tile, concrete or stone.
- Carbide-tipped blade for use on discontinued Model Nos. 800 and 810 Super Saws.
- Blade has 40 carbide teeth for a smooth cut and long blade life. For use on wood or dry wall only.
- Arbor hole countersunk for flush mounting blade screw. Body has two holes for blade driver.
- For cutting wood or dry wall only. Do not use on any metal, ceramic tile, concrete, or stone.
- Replacement 6 ½” diameter masonry blade for Crain No. 800, 810, 812, 820 and 825 undercut saws.
- Dry cutting composition blade for undercutting masonry walls or hearths.
- Produces seven to ten feet of undercutting depending on material and depth of cut.
- For use in undercutting masonry materials only. Not for use on any kind of metal.
- Carbide-tipped replacement blade for Crain No. 812 Super Saw or No. 825 Heavy-Duty Undercut Saw.
- Large 6 ½” diameter blade can fully undercut inside corner areas.
- 40 carbide teeth and precision-formed steel body produces smooth, accurate cuts.
- Not for use on any metal, masonry, stone, or ceramic tile materials.
- Accessory 6 ½” diamond blade for the Crain No. 812, No. 820, or No. 825 undercut saws.
- Dry-cutting segmented abrasive cutting diamond blade.
- Provides superior blade life cutting masonry, ceramic tile, or stone.
- Not for use on any metal or wood materials.
- Undercuts doors in place, inside corners, and masonry walls and hearths. Vacuum fitting for dust collection.
- Diamond blade available as accessory for undercutting tile and stone walls (No. 822).
- Dual lead screws provide slip proof height adjustment. Aluminum ratchet handle is highly durable.
- Comes with carbide tipped blade (No. 836), masonry blade (No. 805) and carrying case.
- Carbide-tipped replacement blade for the No. 835 Heavy-Duty Undercut Saw.
- Large 6 ½” diameter blade can fully undercut inside corner areas.
- 40 carbide teeth produce smooth, accurate cuts.
- Not for use on any metal, masonry, stone, or ceramic tile materials.
- Bolts onto Crain No. 825 and No. 835 Heavy-Duty Undercut Saws to capture more sawdust and channel towards vacuum port.
- Spring-loaded shroud adjusts automatically to the height of cut and follows the floor contour.
- Also includes a pivoting depth gauge to control the depth of cut.
- Dust cover must be removed to cut inside corners. Do not use the saw without dust cover or depth gauge in place.
- The pulling claw features a compound leverage jaw and large contoured handle.
- Works great for pulling up glued-down flooring materials. Withstands heavy hand pulling.
- Spring-loaded jaw opens automatically to insert an edge of the material. Just insert material and pull.
- The harder you pull, the harder the roller activated upper jaw clamps on the material.
- Handle assembly only for family of Metal Mitre interchangeable die sets used to make corners in cap metal.
- Compound leverage handle generates enough force to punch notched shapes out of aluminum cap.
- Die sets fasten onto the cast iron die holder with two fasteners. No die set is included.
- Accepts these die sets: No. 846, No. 848, No. 850, or as replacement handle for No. 870 Vinyl Notcher.
- Interchangeable Metal Mitre die set only with thick .135” punch for heavier carpet or wall board cap.
- Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
- NOTE: this punch is too thick to enter the narrow channels of laminate and vinyl cap metal.
- For use on aluminum cap metal only. Repl. punch: 1846-A. No handle is included with this die set.
- Combo including a handle and die set with thick .135” punch for heavy carpet or wall board cap.
- Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
- Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
- NOTE: punch for this combo is too thick to enter the narrow channels of laminate and vinyl cap metal.
- Interchangeable die set only with .090” thick punch for most vinyl and carpet cap with at least 3/32” opening.
- Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
- Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
- For use on aluminum cap metal only. Repl. punch: 1848-A. No handle is included with this die set.
- Combo including a handle and die set with relieved .090” thick punch for most vinyl and carpet cap.
- Works on cap metals with at least 3/32” opening. For use on aluminum cap metals only.
- Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
- Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
- Interchangeable die set only with .050” thick punch for vinyl and laminate cap with at least 1/16” opening.
- Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
- Slender punch for narrow channels. Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
- For use on aluminum cap metal only. Repl. punch: 1850-A. No handle is included with this die set.
- Combo including a handle and die set with slender .050” thick punch for most vinyl and laminate cap.
- Slender punch works on cap metals with at least 1/16” opening. For use on aluminum cap only.
- Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
- Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
- Makes fast angle cuts in quarter round, eliminating need for a chop saw.
- Stout 2 ½” long high carbon steel blade is strong enough and sharp enough to shear cut wood.
- Table includes gauge for making 22.5° angle cuts for "soft corners" and 45° angle for square corners.
- Extra-long vinyl coated handles provide adequate leverage for cutting.
- One each replacement blade for No. 855 Wood Miter that makes angle cuts in wood quarter round.
- Stout 2 ½” long blade.
- Sharp enough and strong enough to shear cut wood materials cleanly.
- Blade is made from high carbon steel for long life.
- Specialty combo handle and die set with heavy .156” thick punch for use on vinyl T-moldings only.
- Quickly cuts out a relief notch from the insert of the T-molding with 1/4” bottom and 45° side angles.
- After relief notch is removed, the T-molding easily forms tight radius bends, such as for corners.
- Sold as combo handle and die set only. Die Set for No. 870 is not sold separately.
- Makes clean, ultra-straight cuts in vinyl trims much faster than with a knife.
- Cut pieces come together perfectly to form more attractive corners.
- Tool includes a gauge for cutting the trim at a 45° angle to form a corner, or straight for butt cuts.
- Razor sharp blade is replaceable (No. 881).
- Pack of 3 replacement blades for the No. 880 Vinyl Mitre.
- Blades create 45° cuts in vinyl trims for more attractive corners.
- Razor-sharp edges make clean, accurate cuts in the trim so that cut pieces come together perfectly.
- Comes in a plastic box that snaps closed for storage.
- All-steel case for carrying and protection 3 or 6 inch irons.
- Inner partition for a roll of tape and space to loosely lay the iron cord.
- Case top is connected by piano-style hinge, and includes plated steel folding handle.
- Includes heavy-duty latch with lockable hasp.
- Holds Crain 3 inch irons.
- Holds other popular 3 inch irons.
- Spring clips are riveted to the tray for durability.
- Durable all-steel construction with angled clips for hands-free reinsertion of the iron.
- Ultra-low profile and narrow handle make it easier to bring the seam together.
- Dual indicator lights show power-on and heating status.
- Rotating 12’ HSJO cord assembly with flexible strain relief improves cord life.
- Base includes non-stick coating. Includes durable riveted iron tray.
- Includes No. 905 iron, 25 foot extension cord, and steel case.
- Case holds the iron plus a spare roll of seam tape.
- Case is made with a durable, smooth-acting piano-style hinge.
- Case is made with a plated steel handle and lockable hasp for security.
- Works well for resharpening curved carpet and vinyl knives.
- Medium Crystolon silicon carbide grit.
- Sized 1 1/4" wide by 10" long x 3/4" thick.
- No handle is included with this stone.
- An 8” x 12” steel square that’s useful for patterned vinyl flooring layout work.
- Legs include rulers on front and back marked in 1/16” graduations.
- Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
- Dimensions - body: 12" long x 1 1/2" wide, tongue: 8" long x 1" wide.
- 24” x 16” steel square that’s useful for patterned vinyl flooring layout work.
- Legs include rulers on front and back marked in 1/8” graduations.
- Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
- Dimensions - body: 24" long x 2" wide, tongue: 16" long x 1 1/2".
- Works well for resharpening curved carpet and vinyl knives with resharpenable blades.
- Made from Crystolon silicon carbide.
- Grit is coarse on one side, fine on the other.
- Stone size: 1 1/4" wide by 10" long x 3/4" thick. Handle length: 4 3/4" long.
Handle diameter: 1 1/8" dia.
- Provides basic tools of carpet installation, including:
- 24” tool box, knee kicker, wall trimmer, cushion back cutter
- strip cutter, tool pouch, chalk line & chalk, seam sealer bottle
- razor & utility knives, molding lifter, hammer, stair tool, and
nap shears.
- Cuts a U-shaped groove at the seam line for welding using a pulling action.
- Makes starter grooves for a power groover. Grooves in tight areas and places floors aren’t level.
- Adjustable fin tracks in the seam line and controls grooving depth, permitting faster work.
- Comes with 3 blades, one pre-loaded in the tool, and two stored in the handle.
- Pack of three U-shaped replacement blades for the Crain No. 955 Pull Hand Groover.
- Precision formed from high carbon steel, heat treated, and hand sharpened.
- Locator hole above screw hole keeps blade rigidly in place on Crain No. 955 groover.
- Standard shape fits other popular hand groovers.
- Used for grooving coved seams and short detail seam areas.
- Includes top and bottom guide fins for grooving coves or grooving flat on the floor
- Guide fins pivot out of the way for cleaning out cuttings from the blade.
- Takes standard profile U-Blades (Crain No. 958 – 5 pack).
- Five pack of 3.5mm standard profile U-Blades.
- Blades are ground front and back to produce two grooving edges.
- Made from high-carbon steel, then hardened and ground for sharp, long-lasting edges.
- Durable five pack clear plastic container snaps closed for storage
- Round speed welding tip for the Crain No. 960 Heat Weld Gun.
- For use with round 4 mm welding rod.
- Air outlet is precisely formed to focus hot air over the seam area.
- Standard sized inlet diameter fits the pencil tip nozzle outlet of most other popular heat weld guns.
- Adapts our No. 960 Heat Weld Gun to our No. 961 Triangular or No. 962 Round Welding Tips.
- Angled outlet is convenient for holding the heat gun and keeping the speed tip on the rod.
- Useful in areas where speed tips can’t go such as coved areas.
- Standard diameter inlet and outlet outlet fits most popular heat weld guns and speed tips.
- Trims excess heat welding rod at the seam without gouging high spots.
- Includes sharp, flexible blade that is replaceable and built-in pivoting trim guide.
- On first pass, trim with guide under the blade, then pivot guide out and trim second pass.
- Eliminates difficult resharpening of quarter moon knives and gouging high spots.
- One each replacement blade for the No. 965 Skiving Knife.
- Blade is flexible to eliminate gouging of high spots.
- Blade is replaceable to eliminate difficult resharpening of quarter moon knives.
- Used for trimming excess heat welding rod at the seam areas.
- Pack of five replacement blades for the No. 965 Skiving Knife.
- Blades are flexible to eliminate gouging of high spots.
- Blades are replaceable to eliminate difficult resharpening of quarter moon knives.
- Used for trimming excess heat welding rod at the seam areas.
- Cuts a groove of consistent depth for heat welding solid vinyl flooring.
- Maintains consistent grooving depth when floors aren’t level up to 1/4" variation over 1 foot of seamline.
- Spring-loaded floor following dust shroud improves dust control.
- Includes 12 tooth 130mm carbide-tipped blade (No. 971) and case. Diamond grit blade sold separately (No. 972).
- Comes with a Leister Triac ST heat gun for consistent and reliable heat output.
- A single dial on the back of the heat gun controls temperature from 104° - 1290°F.
- Standard 1 1/4” air outlet fits a wide variety of nozzles.
- Comes with pencil tip nozzle, triangular welding tip, round welding tip, and carrying case.
- Replacement carbide tipped blade for the Crain No. 970 Power Groover.
- 12 tooth 130 mm blade works on other groovers that take this size blade.
- Cuts a trapezoidal shaped groove in the material. Blade is resharpenable.
- Not for use on metal impregnated safety floors (see No. 972 Diamond Groover Blade).
- Heavy grit diamond abrasive blade for the Crain No. 970 Power Groover.
- Use on metal impregnated safety floors only. Makes an approx. 3.4 mm wide groove.
- Continuous rim diamond grit brazed on the entire outside diameter.
- 130 mm diameter works on other groovers that take this sized blade.
- Precision guide wheels track in the seam to cut a groove for welding.
- Groove curves with the clip-on foot plate.
- Rear blade grooves up close to the wall.
- Cuttings flow out the handle. Handle opens for cleaning. Comes with protective bag.
- Versatile tip works with 3 mm round, 5 mm round, half-moon, or triangular welding rod.
- Adjusting screw at the rod inlet adapts the inlet to the various rod shapes.
- Grooved brass pressure roller is also adaptable to the various rod shapes.
- Hot air inlet is sized to fit the Crain No. 960 or No. 980 Heat Weld Guns, and other popular models.
- Trims excess welding rod from the seam area after cooling making it flush with the floor.
- Used in a two-step trimming process with the No. 986 Trim Guide.
- Use the trim guide under the blade on first pass, then remove the trim guide on second pass.
- Knife is resharpenable and comes with protective pouch.
- Depth control guide for the No. 985 Quarter Moon Knife.
- Used with the knife to trim excess welding rod in a two-step process.
- Insert guide under the knife to remove the bulk of the material on a first pass.
- Remove guide on second pass and the knife trims the remaining excess flush to surrounding floor.
- Used for welding areas where a speed tip does not work well such coved areas.
- Welding rod is threaded through the hollow handle and put under the roller.
- Roller has a grove for guiding and pressure the welding rod into the seam.
- As the roller presses and holds the rod, a heat gun with pencil-tip nozzle welds it.
- A kit of the basic tools needed for vinyl welding at a great price!
- Includes: Leister Triac ST heat gun, pencil tip nozzle and round tip.
- Also includes: power groover, rolling hand groover, detail hand groover, skiving knife, selvage trimmer, recess scriber, hook handle utility knife, hand roller, and cleaning brushes.
- Includes metal carrying case that holds all the tools.
- Flameless electric heat gun producing hot air up to 1000°F for softening, forming and cutting sheet vinyl and VCT.
- Adjustable intake cover adjusts temperature from 750°F - 1000°F. Fan output is 27 CFM.
- 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
- Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
- Pack of 15 high-quality German-made hook blades. Hook shape good for cutting over concrete.
- Very good for following score lines on linoleum and making long rough cuts in sheet vinyl.
- The blades come in a plastic box with a hinged lid that snaps closed for storage.
- Usable with most utility knives and Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.
- Pack of 10 Personna® deep hook blades. These blades can be used in most utility knives.
- Hook blades keep the cutting edge off the floor when cutting concrete.
- Hook blades also good for following score lines in linoleum and making long rough cuts in sheet vinyl.
- Blade dim.: length: 2.0", width: .75", thickness: .025". Use in Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.
