This three foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the accuracy of our ground steel straight edges. The serrated slip-proof bottom side helps the tool to stay put on the carpet’s backing while cuts are being made. Includes a 45° angle on one end, and a hanging hole on the other. Dimensions: 36″ long x 2 1/2” wide x 3/16” thick. Net weight: 1 1/4 lbs.
This six foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the accuracy of our ground steel straight edges. The serrated slip-proof bottom side helps the tool to stay put on the carpet’s backing while cuts are being made. Includes a 45° angle on one end, and a hanging hole on the other. Dimensions: 72″ long x 2 1/2” wide x 3/16” thick. Net weight: 2 1/2 lbs.
The deluxe strip cutter has long 1 7/8” blades that can cut wide architectural strip straight in a single cut. It can also cut regular strip straight or diagonally in one cut. Blade stabilizers on the bottom blade holder prevent splaying of the blades during the cutting motion. This prevents splinters from getting stuck between the blades, and directs more force downward into the cutting motion. The handle includes a pivoting blade storage tab. Leverage handle travel is adjustable, and locks closed in storage. All steel construction ensures durability. Blades: No. 451 Net Weight: 1 1/4 lbs.
This package of replacement blades for the Crain No. 450 Deluxe Strip Cutter includes twelve blades. When used in the No. 450 Deluxe Strip Cutter, they can cut wide architectural strip straight in a single cut. They can also cut regular strip straight or diagonally in one cut. The packaging includes a clear plastic box with a lid that snaps shut to protect blades in storage. Blade dimensions: length 1.87″, width .48″, thickness .040″. Net weight: 1 oz.
This heavy-duty cloth bag slips over standard-sized four foot long tackless strip boxes. The bag helps prevent the boxes from tearing and breaking open, keeping the tack strip protected and properly stored. The reinforced end panel with heavy-duty zipper and double-stitched handle increase durability. Projects a professional image and improves efficiency by keeping the strip organized. Net weight: 1 1/2 lbs.
This tool has a precision magnetic tip that can hold nails in position so they can be driven into areas where it would be difficult with fingers only. Works well driving hard to hold stubby nails into the tack strip when fastening strip to concrete, for example. The tool’s body is made from a 5 ½” long stainless steel body with a powerful magnetic insert on one end and the hammering head on the other. Net weight: 8 oz.
This long-nosed hammering tool extends beneath toe-spaces and other low clearance areas to drive tack strip nails and other nails into the subfloor. The hammering tip is magnetized to temporarily hold a nail in position. The forged alloy steel body includes a bonded rubber-like handle that reduces impact vibration from the hammer being transmitted to the hand and wrist. Net weight: 5 lbs.
This 20 oz. claw hammer is good for hammering down and pulling up tack strip. Forged steel head is induction hardened and includes a magnetic nail holder for starting nails in hard to reach places. The durable fiberglass handle is jacketed for overstrike protection and includes a contoured gripping surface. Fully featured and an excellent value! Net Weight: 20 oz.
The Vaughan half hatchet works as a multi-purpose tool for cutting and hammering down tackless strip. The polished head includes a 3 ½” resharpenable cutting blade and a hammering head for nailing. The hickory hardwood handle is contoured for gripping. A Vaughan quality product, made in the USA! Net weight: 22 oz.
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The oval head of the No. 078 seats in metal moldings with countersunk holes. The semi-square body compresses and holds against the walls of a pre-drilled 1/8” hole. For carbide or masonry drill bits used to drill the 1/8” holes for these fasteners, see our No. 223 1/8” Solid Carbide Drill with No. 225 1/8” Hexagon Adaptor. Fastener dimensions: 1/8” dia. x 7/8” long. Hole size: 1/8” x 7/8“. Net weight: 1 lb. jar of nails.
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled 1/8” hole. For carbide or masonry drill bits used to drill the 1/8” holes for these fasteners, see our No. 223 1/8” Solid Carbide Drill with No. 225 1/8” Hexagon Adaptor. Fastener dimensions: 1/8” dia. x 7/8” long. Hole size: 1/8” x 1″. Net weight: 1 lb. jar of nails.
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled 1/8” hole. For carbide or masonry drill bits used to drill the 3/16” holes for these fasteners, see our No. 224 3/16” Solid Carbide Drill with No. 226 3/16” Hexagon Adaptor. Fastener dimensions: 3/16” dia. x 7/8” long. Hole size: 3/16” x 1″. Net weight: 1 lb. jar of nails.
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled 1/8” hole. For carbide or masonry drill bits used to drill the 1/8” holes for these fasteners, see our No. 223 1/8” Solid Carbide Drill with No. 225 1/8” Hexagon Adaptor. Fastener dimensions: 1/8” dia. x 5/8” long. Hole size: 1/8” x 3/4“. Net weight: 1 lb. jar of nails.
The No. 223 is a 1/8” solid carbide drill bit to create for 1/8” holes in concrete suitable for fastening our No. 078, No. 580, or No. 780 aluminum drives. Each bit includes two usable ends. This drill bit requires a No. 225 1/8” Hexagon Adaptor to adapt it to the chuck of a drill. Drill RPM must be maintained between 1700 to 3500 RPM. Length: 1 7/16“. Net weight: 1/6 oz.
The No. 224 is a 3/16” solid carbide drill bit that creates for 3/16” holes in concrete suitable for fastening our No. 783 aluminum drives. Each bit includes two usable ends. This drill bit requires a No. 226 3/16” Hexagon Adaptor to adapt it to the chuck of a drill. Drill RPM must be maintained between 1700 to 3500 RPM. Length: 1 1/2” Net weight: 1/3 oz.
The No. 225 1/8” adaptor adapts our No. 223 1/8” Solid Carbide Drill Bits to work in a standard electric drill chuck. The shank diameter on the adaptor is 1/4 inch. An internal collet tightens down on the drill bit to hold it in the adaptor. Made from steel, heat treated for wear resistance, and zinc plated. Net weight: 2 oz.
The No. 226 3/16” adaptor adapts our No. 224 3/16” Solid Carbide Drill Bits to work in a standard electric drill chuck. The shank diameter on the adaptor is 1/4 inch. An internal collet tightens down on the drill bit to hold it in the adaptor. Made from steel, heat treated for wear resistance, and zinc plated. Net weight: 2 oz.
This tool has a wedge with forked-shaped edge on one end and a solid steel pin on the other for removing door pins from types of hinge assemblies. If the bottom of the hinge is open, simply insert the pin and tap it upwards to lift the head. If it is not open, insert the fork-shaped edge under the pin and hammer to wedge it up. Once the pin is raised, the fork can be used under the head to lift the pin up and out of the hinge. The nickel-plated steel body withstands hammering. Net weight: 8 oz.
This wedge-shaped tool has a forked-shaped edge on one end with a capture spring that holds the greasy pin on the fork, preventing it from falling on the carpet below. On the other end, the tool has a solid steel pin. If the bottom of the hinge is open, simply insert the pin and tap it upwards to lift the head. If the hinge is not open, insert the fork-shaped edge under the pin and hammer to wedge it up. Once the pin is raised, the fork can be inserted under the head to lift the pin up and out. The capture spring holds it on the fork as it is removed. The nickel-plated steel body withstands hammering. Net weight: 8 oz.
This high-powered 220W gun quickly melts glue sticks for high output applications such as gluing tack strip to concrete with acrylic glue sticks. The gun has variable temperature control from 284°F – 428°F. It comes with a precision 1/8” glue nozzle and a carrying case. Takes standard 7/16” diameter glue sticks (Crain No. 201 10″ regular, No. 202 4″ regular, or No. 208 10″ acrylic). Works with the following Crain accessory nozzles: No. 627 Carpet Edge Sealing Tip, No. 628 1/4” Nozzle, No. 629 1/8” Nozzle (all sold separately). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 4 lbs.
This 80 watt glue gun comes with our No. 629 1/8” Nozzle which has a small diameter extension tube for use on detail work. It also comes with a standard nozzle that can be used to deliver larger volumes of adhesive. This gun works with standard 7/16” diameter glue sticks (Crain No. 201 10″ Glue Sticks or No. 202 4″ Glue Sticks). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 11 oz.
This 100 watt glue gun comes with a precision carpet edge sealing tip (No. 627) and a conventional 1/8” nozzle (No. 629). The carpet edge sealing tip works at an upright angle that allows a convenient pulling motion along the carpet edge. The process occurs in the line of sight for observing the glue application. Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying. Afterwards, during the seaming process, the hot iron reactivates the hot melt, allowing the edges to bond together to reduce seam peaking. Takes standard 7/16” diameter glue sticks (Crain No. 201 10″ or No. 202 4″). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 1/4 lbs.
This precision glue tip for popular melt glue guns works at an upright angle that allows a convenient pulling motion along the carpet edge. The process occurs in the line of sight for observing the glue application. Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying. Afterwards, during the seaming process, the hot iron reactivates the hot melt, allowing the edges to bond together to reduce seam peaking. The standard thread size fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes. Thread size: 7/16” major diameter- 20 threads per inch. Includes glue tip only. Glue gun not included. In operation, this tip and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.
The No. 628 1/4” nozzle is crimped on the end to form a thin opening approximately 1/32” (0.030″) x 7/32” (0.215″) to deliver a thin cross section of hot melt adhesive. It is good for precise edge sealing work. Attaches to either Crain No. 203, No. 204, or No. 207 Glue Guns or others guns with standard size thread. Thread size: 7/16” major diameter- 20 threads per inch. In operation, this nozzle and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.
The No. 629 1/8” nozzle has an extended 1/8” tube that can deliver glue to precise spots such as along a fraying seam edge. The 0.085″ inside diameter delivers a enough adhesive even for sealing large tufts such as Berbers. Attaches to either Crain No. 203, No. 204 or No. 207 Glue Guns or other guns with standard size thread. Thread size: 7/16” major diameter- 20 threads per inch. In operation, this nozzle and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.
These acrylic 10″ long glue sticks quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors. They are a fast alternative to aluminum drives or contact cement, setting up after 60 – 80 seconds. Apply using a high temperature glue gun operating at 350°- 390°F, such as the Crain No. 207. Comes in a self-closing plastic bag for storage. Bag includes 19 sticks. Sticks are standard 7/16” diameter for use in a wide variety of glue guns. Melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 lb.
These 10” glue sticks provide more open time to position materials (approximately 3 minutes). They are helpful to position starter boards for installation of hardwood flooring, or for gluing long trim pieces. Includes 20 sticks and comes in a self-closing bag for storage. Sticks are standard 7/16” diameter for use in a wide variety of glue guns. For best results, apply using a high temperature glue gun operating at 350°- 390°F, such as the Crain No. 207. Apply in small dollops rather than thin lines to preserve heat. Melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 lb.
These glue sticks are 10 inches long and have the standard 7/16” diameter for use in glue guns that take this standard size stick (including Crain No. 203, No. 204 and No. 207 Glue Guns). They come in a resealable heavy-duty clear plastic bag for storage in the tool box. Each bag includes one pound or 19 sticks. Melted glue temperatures from the glue gun are very hot, up to 400°F. Users should avoid contact with hot melted glue and keep out of the reach of children. Net weight: 1 lb.
These glue sticks are 4 inches long and have the standard 7/16” diameter for use in glue guns that take this standard size stick (including Crain No. 203, No. 204 and No. 207 Glue Guns). They come in a resealable heavy-duty clear plastic bag for storage in the tool box. Each bag includes 8 oz. or 24 sticks. Melted glue temperatures from the glue gun are very hot, up to 400°F. Users should avoid contact with hot melted glue and keep out of the reach of children. Net weight: 8 oz.
This multi-purpose seam sealer bottle works well on residential stretch-in or commercial glue-down jobs. It comes with a plastic applicator with a lip that hooks on the carpet for residential jobs. Instructions printed on the bottle explain how to cut off the lip and adjust applicator height on commercial jobs by using the floor itself as a guide. Each bottle also comes with an extra cap for storage. Works well with Crain Jiffytex Latex seam sealer, or other seam sealers, but it is a bottle only and does not include any seam sealer. Holds 8 oz. of sealer. Net weight 1 1/4 oz.
This cart has a full-sized 20 inch wide x 60 inch long bed that provides extra support for long and heavy rolls up to 1000 lbs. The tubular steel frame is reinforced with central steel plates for added durability. Four eyelets are provided for tying down the load. The large diameter 16″ pneumatic tubed tires are tall and wide enough to roll up curbs or across gravel. Assembled size: length 60 inches, width 20 inches, height 18 inches. Weight capacity 1,000 lbs. Cart net weight: 42 lbs.
This fully-featured yet lightweight 24″ toolbox is made from advanced “structural foam” materials. The thick walls are very durable but weigh a lot less. The box rolls level with the ground thanks to a long, top-mounted pull handle that can be conveniently pulled along while walking. The inner tray has features that assist in carpet seaming, including a series of angled recesses which allow steam to escape while also evenly pressuring the seam. Includes a folding, recessed top carrying handle, and integral side handles for lifting with both hands. Case has three latches and a central hasp for locking. Net weight: 16 lbs.
This thread is three ply waxed 100% polyester hand stitching thread that is wound on a plastic bobbin. The wax coating helps the thread pass smoothly through the carpet that is being sewn. The color is natural (beige) which normally is similar to the color of the carpet’s backing. Polyester thread is economical, but it may stretch more in comparison to our linen thread (No. 771). For this reason, it may show more of the seam when used for carpet seaming purposes. Weight including bobbin: 6 oz.
This thread is waxed three cord natural linen. It is wound on a cardboard bobbin. The wax coating helps the thread pass smoothly through the carpet that is being sewn. The color is natural (beige) which normally is similar to the color of the carpet’s backing. Works well for hand sewing carpets including hand sewing seams. Net weight including bobbin: 6 oz.
These 2 1/8 inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 25 needles only. Net weight 1/2 oz.
These 3 inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 25 needles only. Net weight 1/2 oz.
These 4 inch, 17 gauge curved sewing needles are sometimes referred to as “mattress needles”, but are also good for sewing carpet. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 12 needles only. Net weight 1/2 oz.
The No. 712 is an English #12 size (U.S.A. size #0) small open-end sewing thimble. This size is suitable for use on a small-sized finger. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the fingertip for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.
The No. 713 is an English #13 size (U.S.A. size #00) medium open-end sewing thimble. This size is suitable for use on a medium-sized finger. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the fingertip for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.
The No. 714 is an English #14 size large open-end sewing thimble. This size is suitable for use on a large-sized finger. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the fingertip for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.
The No. 715 is an extra-large open-end sewing thimble. This size is suitable for use on the thumb. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the end of the thumb for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.
The Irwin® aluminum chalk line has an aluminum housing and a steel rewind handle for durability. The polyester line delivers 5 – 6 strikes per pull. Large hook provides holding power. The handle locks the line for use as plumb bob. Line length: 100 feet. Holds approximately 2 oz. of chalk. Irwin® is a registered trademark of the Irwin® corporation. Net weight: 8 oz.
The Keson chalk line has a high speed 3X rewind handle for fast retrieval of line. The metal rewind handle can also activate a clutch to release line without spinning. Refill chalk by inserting the chalk bottle nozzle into its “Big Mouth” chalk port. The twisted synthetic line picks up chalk for marking. The impact-resistant plastic body is durable. Refill capacity: 3 oz. of chalk. Line length: 100 feet. Keson® is a registered trademark of the Keson® corporation. Net weight: 8 oz.
This Irwin® STRAIT-LINE® standard white marking chalk leaves a temporary mark with high visibility for marking out necessary cuts of carpet. The cap includes a folding extended nozzle that self-seals for fast, precise refills with less waste. Includes 8 oz. of chalk per bottle. Irwin® and STRAIT-LINE® are registered trademarks of the Irwin® corporation.
This Irwin® STRAIT-LINE® standard blue marking chalk leaves a temporary mark with high visibility for marking out necessary cuts of carpet. The cap includes a folding extended nozzle that self-seals for fast, precise refills with less waste. Includes 8 oz. of chalk per bottle. Irwin® and STRAIT-LINE® are registered trademarks of the Irwin® corporation.
This Irwin® STRAIT-LINE® standard white marking chalk leaves a temporary mark with high visibility for marking out necessary cuts of carpet. The cap includes a folding extended nozzle that self-seals for fast, precise refills with less waste. Includes 5 lbs. of chalk per jug. Irwin® and STRAIT-LINE® are registered trademarks of the Irwin® corporation.
This kit provides the basic tools of carpet installation, at a price that saves money. The kit includes: No. 024 Rolling 24″ Tool Box, No. 505 Knee Kicker, No. 245 Deluxe Carpet Trimmer, No. 301 Cushion Back Cutter, No. 450 Deluxe Strip Cutter, No. 354 Tool Pouch, No. 135 Keson Chalk Box, No. 080 8 oz. White Chalk, No. 145 Seam Adhesive Bottle, No. 726 Pivoting Carpet Knife, No. 189 Hook Handle Utility Knife, No. 157 Molding Lifter, No. 332 Economy Hammer, No. 152B Cushion Stair Tool, and No. 187 Big-Loop Nap Shears. Net weight: 29 lbs.
Cuts carpet tiles, vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Handles materials up to ¾” thick per cut. Built-in wheels allow it to be moved easily from a kneeling position. The movable fence and tile guide can be set for repetitive straight or diagonal cuts. Replacement blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 674 Wood Cutter Blade. Net weight: 38 lbs.
