Other - Cove Base Tools - Other

No. 196 Heavy-Duty Comfort Knees

These Comfort Knees pads have an extra thick polyurethane skin coating on the kneeling surfaces for increased durability. The polyurethane skin also helps to prevent build-up of sharp items such as splinters that can scratch floors. Comfort Knees are designed for floor installation. They provide protection for both kneeling or knee kicking, and can stay on at all times. The extra wide straps won’t pinch your legs. The contour conforms to the motion of your knee. Made from flexible yet durable neoprene material, these pads are machine-washable. Inner knee pad is replaceable. Net weight: 1 lb./set.

No. 197 “Comfort Knees” Knee Pads

Made especially for carpet installation, these pads provide protection for both kneeling and knee kicking, so they stay on at all times. The extra wide straps won’t pinch your legs, even when wearing shorts. The contour conforms to the motion of your knee whether walking, kneeling, or kicking. Made from flexible yet durable neoprene material, these pads are machine-washable. Inner knee pad is replaceable. Net weight: 1 lb./set.

No. 199 Polyurethane Skin Comfort Knees

The polyurethane skin on the kneeling surfaces of these pads prevent build-up of sharp items such as splinters that can scratch floors. The polyurethane is also resistant to tearing and penetration, providing extra durability. Comfort Knees are designed for floor installation. They provide protection for both kneeling or knee kicking, and can stay on at all times. The extra wide straps won’t pinch your legs. The contour conforms to the motion of your knee. Made from flexible yet durable neoprene material, these pads are machine-washable. Inner knee pad is replaceable. Net weight: 1 lb./set.

No. 206 Leather Knee Pads

Leather knee pads have ultra-thick padding for greater kneeling comfort. The tough leather wear surface is very durable and minimizes build-up of sharp objects like splinters that can scratch floors. The thick felt inner padding is riveted to the leather. The thick leather straps and steel buckles are designed to last. Net weight: 1 ³/₄ lbs.

No. 200 Elastic Strap Knee Pads

These genuine sponge-rubber knee pads are ½” thick to provide a good cushion feel and extra durability. The wide 1 ½” elastic straps reduce the uncomfortable pinching feel around the back of the leg, and include fast acting hook-and-loop fasteners. The elastic straps are easily adjustable and stretches as you move. Good quality and value in a knee pad! Net weight: 1 lb. / set.

No. 198 Buckle Strap Knee Pads

These genuine sponge-rubber knee pads are ½” thick to provide a good cushion feel and extra durability. The ½ wide straps include durable hinge-activated buckles. To adjust the straps, simply insert the angled end of the strap into the buckle and press the lever down. Once fastened, the buckles hold tight. No hassles with carpet fuzz build-up like with hook and loop fasteners! Good quality and value in a knee pad! Net weight: 1 lb. / set.

No. 250 Troxell Soft R Knee Pads

These ultra-soft knee pads are the Troxell regular/medium size in royal blue color. They are made from durable neoprene with polyurethane protective coating. The wide flexible straps won’t pinch the back of the leg even when wearing shorts. The straps fasten to the front face of the pad using hook and loop fasteners. Inner pad is made from high density closed cell foam. This is Troxell product #17-209SOFT. Net weight: 11 oz. / set

No. 251 Troxell Soft L Knee Pads

These ultra-soft knee pads are the Troxell size large in royal blue color. They are made from durable neoprene with polyurethane protective coating. The wide flexible straps won’t pinch the back of the leg even when wearing shorts. The straps fasten to the front face of the pad using hook and loop fasteners. Inner pad is made from high density closed cell foam. This is Troxell product #17-209SOFTL. Net weight: 12 oz. / set

No. 252 Troxell XL Leather Knee Pads

The Troxell “Leather Head” knee pads are made from durable neoprene with an extra tough leather protective covering. The wide flexible straps won’t pinch the back of the leg even when wearing shorts. The straps fasten to the front face of the pad using hook and loop fasteners. Inner pad is made from high density closed cell foam. This is Troxell product #17-209SOFTXL. Net weight: 1 lb. / set

No. 733 Extra-Grip Razor Knife

This carpet knife has a slim profile and heavy knurling on the body and up front for better grip and precision cutting. With a turn of the folding thumbscrew, it pivots open for blade storage. Blades are easily removed with a teeter-totter action. Blade clamp is magnetized for easy blade changes. Takes standard slotted razor blades. Blades: No. 306, 308, and 309. No blades are included with this knife. Net weight: 4 oz.

No. 725 Deluxe Carpet Knife

The rear-loading blade magazine of this slotted razor blade knife provides quick access to replacement blades. Simply loosen the folding thumbscrew, and the magazine is released. The wide contours of the knife’s body create ergonomic advantage by providing greater gripping surface for a more open, less constricted hand grip. Precision blade holder holds blades tight at varying blade extensions when needed. Blades: No. 308. No blades are included with this knife. Net weight: 4 oz.

No. 726 Pivoting Carpet Knife

The pivoting carpet knife pivots open for fast access to the replacement slotted razor blades. Opens quickly by loosening the folding thumb screw. The wide contours of the knife’s body create ergonomic advantage by providing greater gripping surface for a more open, less constricted hand grip. Precision blade holder holds blades tight at varying blade extensions when needed. Blades: No. 308. No blades are included with this knife. Net weight: 4 oz.

No. 330 Push-Button Carpet Knife

This slotted razor blade carpet knife pivots open with a touch of the spring-loaded rear button for fast access to replacement blades. The contoured handle includes knurling on the both sides for improved grip. The large, radiused fin behind the blade holder for thumb pressure improves control. Body is finished with attractive red paint. Blades: 308. No blades are included with this knife. Net weight: 7 oz.

No. 217 Hook Handle Razor Knife

This slotted razor blade carpet knife has multiple added contours for improved grip. The wide contoured mid-section transitions to a narrow rear hook in proportion to the palm and fingers. The rear hook gives the little finger improved advantage for greater pulling power on tough carpet. The body pivots open by loosening the folding thumbscrew for fast access to replacement blades. Precision blade holder holds blades tight at varying blade extensions when needed. Blades: No. 308. No blades are included with this knife. Net weight: 6 oz.

No. 175 Tuck Knife

This knife has a multi-purpose steel blade to tuck carpet near fragile tiles or toilets, a hook edge for heavy cutting, a front scraper edge with a notch to remove door pins, and a flat head screwdriver for tightening Crain scraper screws. Opposite end has steel tapping insert. Blades are replaceable.

No. 720 Hinged Knife

This slotted razor blade knife hinges open after removal of the hardened slotted fastener for access to blade storage. The body features a slim profile that gets into tight areas more easily. The body includes knurled surfaces on both sides for improved grip. The fin behind the blade carrier for thumb pressure improves control. Blades: No. 308. No blades are included with this knife. Net weight: 6 oz.

No. 735 Carpet Pad Knife

This slotted razor blade knife has a relieved blade holder that exposes a longer cutting surface of the blade to more efficiently slice through thick carpet pad. The handle is angled upward to prevent dragging of the knuckles on the pad, and is knurled on both sides for improved grip. The body pivots open for blade storage by loosening the folding thumbscrew. Blades: No. 308. No blades are included with this knife. Net weight: 4 oz.

No. 732 Extra-Grip Utility Knife

This utility blade knife has knurling up front as well as finger contours that provide better grip for precise cutting. Pivots open quickly for blade storage by loosening the folding thumb screw. Replacement blades are easily removed from the body with a teeter-totter action generated by internal ridges. Precision blade clamp holds tight and is magnetized for easier blade changes. Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook). No blades are included with this knife. Net weight: 3 oz.

No. 728 Pocket Utility Knife

This utility blade knife folds with the press of a button so that it can be safely placed in your pants pocket. This model has a durable blade holder that locks rigidly. When opened, the body locks solidly and reliably. The body is contoured for gripping and includes a compartment for blade storage. Overall this is a folding knife capable of meeting the needs of a flooring installer for fast, forceful, and precise cutting. Blades: No. 295. No blades are included with this knife. Net weight: 8 oz.

No. 174 Instant Repair Tool

This tool cuts a three inch diameter circle for removing stained areas from a carpet. Four blades mount on the body to make clean cuts. The sharp central pivot pin is spring-loaded to adjust automatically to different thicknesses of carpet. The solid aluminum body includes finger contours for gripping. Includes plastic cap to protect the body and pin in storage. Blades: 1174-A Net weight: 2 oz.

No. 103 Long Hook Knife

Our best resharpenable carpet knife features a long 3″ blade with greater thickness for rigidity and durability. The gentle hook of the blade forms a sharp point at the end that does the cutting. After sharpening, the superior German steel alloy holds its edge long after others would be dulled. The wood handle is contoured for comfortable grip, and is riveted solidly to the blade. Net weight: 4 oz.

No. 910 Sharpening Stone

This sharpening stone has a medium Crystolon silicon carbide grit that works well for sharpening resharpenable curved carpet and vinyl knives. Grit specification is 150 grit. Size is 1 ¹/₄” wide by 10″ long x ³/₄” thick. No handle is included with this stone. Net weight: 8 oz.

No. 930 Laminated Sharpening Stone

This sharpening stone is made from Crystolon silicon carbide. The grit is coarse on one side, fine on the other. It works well for sharpening resharpenable curved carpet and vinyl knives. Grit specification is 280 grit. The size of the stone only is 1 ¹/₄” wide by 10″ long x ³/₄” thick. The 1 ¹/₈” diameter red handle adds an additional 4 ³/₄” to the length. Net weight: 1 lb.

No. 113 6′ Journeyman Straight Edge

This six foot steel carpet straight edge is precision ground for straightness ± .005″ at the time of shipment. It provides the accuracy and durability needed for preparing carpet seam edges when it is necessary to cut them from the carpet’s backing. This straight edge includes a 45° angle on one end and a hanging hole. Finished with red paint to help prevent rust. Dimensions: 6′ long x 3” wide x ¹/₈” thick. Net weight: 7 ¹/₂ lbs.

No. 113S 4′ Journeyman Straight Edge

This four foot steel carpet straight edge is precision ground for straightness ± .005″ at the time of shipment. It provides the accuracy and durability needed for preparing carpet seam edges when it is necessary to cut them from the carpet’s backing. This straight edge includes a 45° angle on one end and a hanging hole. Finished with red paint to help prevent rust. Dimensions: 4′ long x 3” wide x ¹/₈” thick. Net weight: 4 ¹/₂ lbs.

No. 119 75″ Combination Edge

This 75 inch steel straight edge for carpet installation includes both a serpent edge on one side and a straight edge on the other, providing the benefits of two tools in one. The serpent edge side of the tool is used on “sculptured” type patterned carpet to produce less visible seams. The straight edge side is precision ground +/- .005″ for straightness. This provides the accuracy needed to prepare seam edges when it is necessary to cut them from the carpet’s backing. Net weight: 8 ¹/₂ lbs.

No. 119S 36″ Combination Edge

This 36 inch steel straight edge for carpet installation includes both a serpent edge on one side and a straight edge on the other, providing the benefits of two tools in one. The serpent edge side of the tool is used on “sculptured” type patterned carpet to produce less visible seams. The straight edge side is precision ground +/- .005″ for straightness. This provides the accuracy needed to prepare seam edges when it is necessary to cut them from the carpet’s backing. Net weight: 8 ¹/₂ lbs.

No. 535 3′ Carpet Straight Edge

This three foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the accuracy of our ground steel straight edges. The serrated slip-proof bottom side helps the tool to stay put on the carpet’s backing while cuts are being made. Includes a 45° angle on one end, and a hanging hole on the other. Dimensions: 36″ long x 2 ¹/₂” wide x ³/₁₆” thick. Net weight: 1 ¹/₄ lbs.

No. 536 6′ Carpet Straight Edge

This six foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the accuracy of our ground steel straight edges. The serrated slip-proof bottom side helps the tool to stay put on the carpet’s backing while cuts are being made. Includes a 45° angle on one end, and a hanging hole on the other. Dimensions: 72″ long x 2 ¹/₂” wide x ³/₁₆” thick. Net weight: 2 ¹/₂ lbs.

No. 366 Commercial Row Finder

This ultra-straight spring steel row finder has smooth, rounded notches that opens rows of difficult carpets. The rounded ends can easily enter the rows of Berber and loop pile commercial carpets without catching loops. Once this tool finds a row, it can be moved back and forth in a sawing action to open the row. After use, a seam cutter is able to follow the row with reduced shearing of yarns. The textured plastic handle provides good grip. Net weight: 1 ¼ oz.

No. 367 Residential Row Finder

This ultra-straight spring steel row finder has smooth, rounded notches that opens rows of difficult carpets. The pointed ends can easily enter the rows of dense cut pile or plush carpets. The taller, thicker profile clears thick cut pile tufting and increases separation. Once this tool finds a row, it can be moved back and forth in a sawing action to open the row. After use, a seam cutter is able to follow the row with reduced shearing of yarns. The textured plastic handle provides good grip. Net weight: 1 ½ oz.

No. 365 Row Separator

This double-ended tool has a pointed end for cut pile with a wider conical surface behind the point. On tall cut pile, the narrow point penetrates deep within the row, while the wider conical surface spreads the tufts. The opposite end is beveled and rounded for spreading loops on loop pile and Berber carpets without snagging. This tool will effectively open and spread rows for reduced shearing of carpet nap by the seam cutter. Machined from solid steel, and nickel plated. Net weight: 2 ½ oz.

No. 436 Straight Axle Roller

This roller has a solid axle with ten steel star rollers. The star wheels press the carpet’s backing into the hot melt adhesive. The steel bracket is welded onto the handle stem and plated. Rounded handle fits well in the palm of the hand, and is made of impact-resistant plastic for durability. Roller width: 4″. Net weight: 14 oz.

No. 438 6″ Pro Roller

The solid axle of the Pro Roller spans six inches wide and has 18 steel star wheel rollers. It ensures adequate pressure across the seam area even when used on wide 6″ tape. The steel axle and handle stem are welded and plated for durability. The hard plastic handle is rounded to fit well in the palm of the hand. Roller width: 6″. Net weight: 14 oz.

No. 435 Flex Axle Roller

The flex axle roller is made with two pivoting axles. Mounted on each axle are seven steel star rollers (14 total). As the roller is moved forward and backward, the axles pivot outwardly then inwardly. This action mixes the carpet fibers and pulls the seam edges closer together for less visible seams. The star wheels press the carpet’s backing into the hot melt adhesive. Roller area width is 4″ total. Net weight: 10 oz.

No. 437 Big Foot Roller

The bigfoot roller is made with three wide ribbed roller sections. The wide surface area on the ribbed surfaces prevents yarns from being snagged, protecting the yarns of delicate carpet fibers better than star wheels. The ribs also provide concentrated pressure to force the carpet’s backing into the hot melt adhesive. This is the best seam roller for fine denier saxony, plush, and velvet carpets. Roller width: 5 ⁵/₈“. Net weight: 15 oz.

No. 476 Carpet Tractor

The carpet tractor has three 2 ½” wide rows of star wheels mounted on a durable steel body with a wide, rounded top surface. The tool produces pressure on the seam to press the carpet’s backing into the adhesive. The three rows of star wheels mix the yarns of the carpet near the seam to reduce visibility. The body shape is optimal for applying hand pressure, and is finished with durable hammertone paint for good grip. Includes 36 total star wheels on three 2 ½” straight axles. Net weight: 2 lbs.

No. 187 Big Loop Napping Shears

Our big loop nap shears have offset handles with oversize loops for users with large fingers. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. The right side loop accommodates two fingers for ease of activation of the top blade. Handles are vinyl-coated for ease of grip. Net weight: 6 oz.

No. 190 Duckbill Napping Shears

Our duckbill nap shears have offset handles with smaller one inch loops for precision control. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. Handles are vinyl-coated for ease of grip. Net weight: 5 oz.

No. 496 8″ Carpet Shears

Our 8″ napping shears provide ultra-large loops and longer 3 inch blades. The angled handles easily position the blades for trimming off the tops of carpet tufts. Oversized loops accommodate large fingers. The larger right side loop accommodates multiple fingers for ease of activation of the top blade. Net weight: 6 oz.

No. 450 Deluxe Strip Cutter

The deluxe strip cutter has long 1 ⁷/₈” blades that can cut wide architectural strip straight in a single cut. It can also cut regular strip straight or diagonally in one cut. Blade stabilizers on the bottom blade holder prevent splaying of the blades during the cutting motion. This prevents splinters from getting stuck between the blades, and directs more force downward into the cutting motion. The handle includes a pivoting blade storage tab. Leverage handle travel is adjustable, and locks closed in storage. All steel construction ensures durability. Blades: No. 451 Net Weight: 1 ¹/₄ lbs.

No. 451 Strip Cutter Blades (12)

This package of replacement blades for the Crain No. 450 Deluxe Strip Cutter includes twelve blades. When used in the No. 450 Deluxe Strip Cutter, they can cut wide architectural strip straight in a single cut. They can also cut regular strip straight or diagonally in one cut. The packaging includes a clear plastic box with a lid that snaps shut to protect blades in storage. Blade dimensions: length 1.87″, width .48″, thickness .040″. Net weight: 1 oz.

No. 455 Strip Saver Bag

This heavy-duty cloth bag slips over standard-sized four foot long tackless strip boxes. The bag helps prevent the boxes from tearing and breaking open, keeping the tack strip protected and properly stored. The reinforced end panel with heavy-duty zipper and double-stitched handle increase durability. Projects a professional image and improves efficiency by keeping the strip organized. Net weight: 1 ¹/₂ lbs.

No. 530 Rubber Base Gouge

This tool for gouging out the back of rubber or vinyl base for tightly-wrapped corners comes with a double-tipped blade. The V-tip makes a sharp V-shaped groove that conforms better to tightly formed sheetrock corners. The U-Tip makes a wider U-shaped groove for fuller corners, or for tougher base where a wider groove must be made. The depth gauge adjusts using a simple set screw.

No. 172 Magnetic Tack Holder

This tool has a precision magnetic tip that can hold nails in position so they can be driven into areas where it would be difficult with fingers only. Works well driving hard to hold stubby nails into the tack strip when fastening strip to concrete, for example. The tool’s body is made from a 5 ½” long stainless steel body with a powerful magnetic insert on one end and the hammering head on the other. Net weight: 8 oz.

No. 166 Magnetic Driving Bar

This long-nosed hammering tool extends beneath toe-spaces and other low clearance areas to drive tack strip nails and other nails into the subfloor. The hammering tip is magnetized to temporarily hold a nail in position. The forged alloy steel body includes a bonded rubber-like handle that reduces impact vibration from the hammer being transmitted to the hand and wrist. Net weight: 5 lbs.

No. 332 Economy Hammer

This 20 oz. claw hammer is good for hammering down and pulling up tack strip. Forged steel head is induction hardened and includes a magnetic nail holder for starting nails in hard to reach places. The durable fiberglass handle is jacketed for overstrike protection and includes a contoured gripping surface. Fully featured and an excellent value! Net Weight: 20 oz.

No. 296 Vaughan Half Hatchet

The Vaughan half hatchet works as a multi-purpose tool for cutting and hammering down tackless strip. The polished head includes a 3 ½” resharpenable cutting blade and a hammering head for nailing. The hickory hardwood handle is contoured for gripping. A Vaughan quality product, made in the USA! Net weight: 22 oz.

No. 078 Aluminum Drives

These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The oval head of the No. 078 seats in metal moldings with countersunk holes. The semi-square body compresses and holds against the walls of a pre-drilled ¹/₈” hole. For carbide or masonry drill bits used to drill the ¹/₈” holes for these fasteners, see our No. 223 ¹/₈” Solid Carbide Drill with No. 225 ¹/₈” Hexagon Adaptor. Fastener dimensions: ¹/₈” dia. x ⁷/₈” long. Hole size: ¹/₈” x ⁷/₈“. Net weight: 1 lb. jar of nails.

No. 223 ¹/₈” Solid Carbide Drill, Ea.

The No. 223 is a ¹/₈” solid carbide drill bit to create for ¹/₈” holes in concrete suitable for fastening our No. 078, No. 580, or No. 780 aluminum drives. Each bit includes two usable ends. This drill bit requires a No. 225 ¹/₈” Hexagon Adaptor to adapt it to the chuck of a drill. Drill RPM must be maintained between 1700 to 3500 RPM. Length: 1 ⁷/₁₆“. Net weight: ¹/₆ oz.

No. 224 ³/₁₆” Solid Carbide Drill, Ea.

The No. 224 is a ³/₁₆” solid carbide drill bit that creates for ³/₁₆” holes in concrete suitable for fastening our No. 783 aluminum drives. Each bit includes two usable ends. This drill bit requires a No. 226 ³/₁₆” Hexagon Adaptor to adapt it to the chuck of a drill. Drill RPM must be maintained between 1700 to 3500 RPM. Length: 1 ¹/₂” Net weight: ¹/₃ oz.

No. 783 Aluminum Drives

These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled ¹/₈” hole. For carbide or masonry drill bits used to drill the ³/₁₆” holes for these fasteners, see our No. 224 ³/₁₆” Solid Carbide Drill with No. 226 ³/₁₆” Hexagon Adaptor. Fastener dimensions: ³/₁₆” dia. x ⁷/₈” long. Hole size: ³/₁₆” x 1″. Net weight: 1 lb. jar of nails.

No. 580 Aluminum Drives

These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled ¹/₈” hole. For carbide or masonry drill bits used to drill the ¹/₈” holes for these fasteners, see our No. 223 ¹/₈” Solid Carbide Drill with No. 225 ¹/₈” Hexagon Adaptor. Fastener dimensions: ¹/₈” dia. x ⁵/₈” long. Hole size: ¹/₈” x ³/₄“. Net weight: 1 lb. jar of nails.

No. 225 ¹/₈” Hexagon Adaptor

The No. 225 ¹/₈” adaptor adapts our No. 223 ¹/₈” Solid Carbide Drill Bits to work in a standard electric drill chuck. The shank diameter on the adaptor is ¹/₄ inch. An internal collet tightens down on the drill bit to hold it in the adaptor. Made from steel, heat treated for wear resistance, and zinc plated. Net weight: 2 oz.

No. 780 Aluminum Drives

These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled ¹/₈” hole. For carbide or masonry drill bits used to drill the ¹/₈” holes for these fasteners, see our No. 223 ¹/₈” Solid Carbide Drill with No. 225 ¹/₈” Hexagon Adaptor. Fastener dimensions: ¹/₈” dia. x ⁷/₈” long. Hole size: ¹/₈” x 1″. Net weight: 1 lb. jar of nails.

No. 226 ³/₁₆” Hexagon Adaptor

The No. 226 ³/₁₆” adaptor adapts our No. 224 ³/₁₆” Solid Carbide Drill Bits to work in a standard electric drill chuck. The shank diameter on the adaptor is ¹/₄ inch. An internal collet tightens down on the drill bit to hold it in the adaptor. Made from steel, heat treated for wear resistance, and zinc plated. Net weight: 2 oz.

No. 362 Door Pin Tool

This tool has a wedge with forked-shaped edge on one end and a solid steel pin on the other for removing door pins from types of hinge assemblies. If the bottom of the hinge is open, simply insert the pin and tap it upwards to lift the head. If it is not open, insert the fork-shaped edge under the pin and hammer to wedge it up. Once the pin is raised, the fork can be used under the head to lift the pin up and out of the hinge. The nickel-plated steel body withstands hammering. Net weight: 8 oz.

No. 363 Deluxe Door Pin Tool

This wedge-shaped tool has a forked-shaped edge on one end with a capture spring that holds the greasy pin on the fork, preventing it from falling on the carpet below. On the other end, the tool has a solid steel pin. If the bottom of the hinge is open, simply insert the pin and tap it upwards to lift the head. If the hinge is not open, insert the fork-shaped edge under the pin and hammer to wedge it up. Once the pin is raised, the fork can be inserted under the head to lift the pin up and out. The capture spring holds it on the fork as it is removed. The nickel-plated steel body withstands hammering. Net weight: 8 oz.

No. 152B Cushion Stair Tool

Stair tools are used with a mallet to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. This tool is a full four inches wide to tuck more carpet each time it is malleted. The soft cushion grip absorbs vibration and is textured for good grip. The outer edges are angled back, forming an offset that protects walls, and permits the corner of the tool to get all the way into an inside corner area for tucking. Smooth tapered blade will not snag or cut the carpet. Net weight: 1 lb.

No. 154 Narrow Stair Tool

Stair tools are used with a mallet to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. The narrow stair tool is only 2 ⁷/₈” wide to deliver more concentrated force when malleted. The outer edges of the tool are angled back, forming an offset that protects walls, and permits the corner of the tool to get all the way into an inside corner area for tucking. Smooth tapered blade will not snag or cut the carpet. Net weight: 1 lb.

No. 155 Bent Stair Tool

The bent blade of this stair tool is helpful when it is necessary to tuck carpet under toe spaces. It is also helpful for tucking carpet underneath Z-bar and under heat registers. The smooth tapered blade will not snag or cut the carpet. The four inch blade tucks a wide section of carpet each time it is malleted. Forged from an impact-resistant steel alloy, and nickel plated. Net weight: 1 lb.

No. 515 Mini-Stretcher with Seam Repair Attachment

The Mini Stretcher is great for pattern matching, fast restretching without tubes, and seam repair. Features include stretch-lock button, two fully pivotable gripper heads, open top wall blade for fast tucking, and carrying case. Gripper heads and wall blade are quickly connected onto either end using the push-button lock pins. Tall seam repair legs that create a 9″ high by 10″ wide work area to run an iron beneath are sold separately (No. 519).

No. 519 Tall Seam Repair Legs

Includes two tall seam repair legs only for Crain No. 515 Mini-Stretcher. They create a 9” high by 10” wide working area to run a seaming iron beneath the stretcher. Each leg includes a quick release pin for connection to the stretcher and holes for fastening to the pin plate assembly. Stretcher and pin plate assemblies are sold separately.

No. 151 White Rubber Mallet

This 20 oz. rubber mallet is made with a white solid rubber head that is non-marking. It can be used to tap down metal moldings without concern for scuff marks, denting, or scratching. The head has two large hammering surfaces that spread the force of impact. Works well with stair tools to prevent glancing blows and deflection. The hardwood handle is contoured for gripping. Net weight: 20 oz.

No. 507 Stairway Stretcher

This stretcher specifically designed for stairs provides a full and uniform stretch across the tread. Begin at the top of the stairs and work downwards, stretching then tucking the stair below. Prevents sore knees that result from kicking in stairs! Comes with carrying case. Net weight: 14 ½” lbs.

No. 518 Stair Claw

This tool provides a simple way to stretch carpet across the stair tread and form it around the stair nosing. Hook the gripper teeth in the carpet just ahead of the stair nosing, then pull the leverage handle down. A pulling action is generated on the teeth that stretches the carpet across the stair tread. At the same time, the bottom edge of the tool tucks the carpet up under the stair nosing. Recesses in the bottom edge allow the nose of the tacker to be inserted for easy stapling. A tough job is made easier with the Stair Claw! Net weight: 2 ounces.

No. 207 High Temp. Glue Gun 220W

This high-powered 220W gun quickly melts glue sticks for high output applications such as gluing tack strip to concrete with acrylic glue sticks. The gun has variable temperature control from 284°F – 428°F. It comes with a precision ¹/₈” glue nozzle and a carrying case. Takes standard ⁷/₁₆” diameter glue sticks (Crain No. 201 10″ regular, No. 202 4″ regular, or No. 208 10″ acrylic). Works with the following Crain accessory nozzles: No. 627 Carpet Edge Sealing Tip, No. 628 ¹/₄” Nozzle, No. 629 ¹/₈” Nozzle (all sold separately). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 4 lbs.

No. 203 Glue Gun

This 80 watt glue gun comes with our No. 629 ¹/₈” Nozzle which has a small diameter extension tube for use on detail work. It also comes with a standard nozzle that can be used to deliver larger volumes of adhesive. This gun works with standard ⁷/₁₆” diameter glue sticks (Crain No. 201 10″ Glue Sticks or No. 202 4″ Glue Sticks). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 11 oz.

No. 204 Edge Sealing Glue Gun

This 100 watt glue gun comes with a precision carpet edge sealing tip (No. 627) and a conventional ¹/₈” nozzle (No. 629). The carpet edge sealing tip works at an upright angle that allows a convenient pulling motion along the carpet edge. The process occurs in the line of sight for observing the glue application. Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying. Afterwards, during the seaming process, the hot iron reactivates the hot melt, allowing the edges to bond together to reduce seam peaking. Takes standard ⁷/₁₆” diameter glue sticks (Crain No. 201 10″ or No. 202 4″). In operation, this gun’s nozzle and melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 ¹/₄ lbs.

No. 627 Carpet Edge Sealing Tip

This precision glue tip for popular melt glue guns works at an upright angle that allows a convenient pulling motion along the carpet edge. The process occurs in the line of sight for observing the glue application. Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying. Afterwards, during the seaming process, the hot iron reactivates the hot melt, allowing the edges to bond together to reduce seam peaking. The standard thread size fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes. Thread size: ⁷/₁₆” major diameter- 20 threads per inch. Includes glue tip only. Glue gun not included. In operation, this tip and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.

No. 209 Extra Open Time Glue Sticks (20 Pack)

These 10” glue sticks provide more open time to position materials (approximately 3 minutes). They are helpful to position starter boards for installation of hardwood flooring, or for gluing long trim pieces. Includes 20 sticks and comes in a self-closing bag for storage. Sticks are standard ⁷/₁₆” diameter for use in a wide variety of glue guns. For best results, apply using a high temperature glue gun operating at 350°- 390°F, such as the Crain No. 207. Apply in small dollops rather than thin lines to preserve heat. Melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 lb.

No. 208 Acrylic 10″ Glue Sticks (19 pack)

These acrylic 10″ long glue sticks quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors. They are a fast alternative to aluminum drives or contact cement, setting up after 60 – 80 seconds. Apply using a high temperature glue gun operating at 350°- 390°F, such as the Crain No. 207. Comes in a self-closing plastic bag for storage. Bag includes 19 sticks. Sticks are standard ⁷/₁₆” diameter for use in a wide variety of glue guns. Melted glue temperatures are very hot, up to 400°F. Users should avoid contact and keep out of reach of children. Net weight: 1 lb.

No. 201 10″ Glue Sticks (19 Pack)

These glue sticks are 10 inches long and have the standard ⁷/₁₆” diameter for use in glue guns that take this standard size stick (including Crain No. 203, No. 204 and No. 207 Glue Guns). They come in a resealable heavy-duty clear plastic bag for storage in the tool box. Each bag includes one pound or 19 sticks. Melted glue temperatures from the glue gun are very hot, up to 400°F. Users should avoid contact with hot melted glue and keep out of the reach of children. Net weight: 1 lb.

No. 202 4″ Glue Sticks

These glue sticks are 4 inches long and have the standard ⁷/₁₆” diameter for use in glue guns that take this standard size stick (including Crain No. 203, No. 204 and No. 207 Glue Guns). They come in a resealable heavy-duty clear plastic bag for storage in the tool box. Each bag includes 8 oz. or 24 sticks. Melted glue temperatures from the glue gun are very hot, up to 400°F. Users should avoid contact with hot melted glue and keep out of the reach of children. Net weight: 8 oz.

No. 628 ¹/₄” Nozzle

The No. 628 ¹/₄” nozzle is crimped on the end to form a thin opening approximately ¹/₃₂” (0.030″) x ⁷/₃₂” (0.215″) to deliver a thin cross section of hot melt adhesive. It is good for precise edge sealing work. Attaches to either Crain No. 203, No. 204, or No. 207 Glue Guns or others guns with standard size thread. Thread size: ⁷/₁₆” major diameter- 20 threads per inch. In operation, this nozzle and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.

No. 629 ¹/₈” Nozzle

The No. 629 ¹/₈” nozzle has an extended ¹/₈” tube that can deliver glue to precise spots such as along a fraying seam edge. The 0.085″ inside diameter delivers a enough adhesive even for sealing large tufts such as Berbers. Attaches to either Crain No. 203, No. 204 or No. 207 Glue Guns or other guns with standard size thread. Thread size: ⁷/₁₆” major diameter- 20 threads per inch. In operation, this nozzle and melted glue are very hot, up to 400ºF. Users should avoid contact and keep out of reach of children. Net weight: 1 oz.

No. 145 Seam Adhesive Bottle

This multi-purpose seam sealer bottle works well on residential stretch-in or commercial glue-down jobs. It comes with a plastic applicator with a lip that hooks on the carpet for residential jobs. Instructions printed on the bottle explain how to cut off the lip and adjust applicator height on commercial jobs by using the floor itself as a guide. Each bottle also comes with an extra cap for storage. Works well with Crain Jiffytex Latex seam sealer, or other seam sealers, but it is a bottle only and does not include any seam sealer. Holds 8 oz. of sealer. Net weight 1 ¹/₄ oz.

No. 195 Carpet Awl

The sharp, high-carbon steel point penetrates the carpet’s backing for fast removal from the tack strip. It can also be used for light carpet stretching in tight areas, such as around toilets. Press the point into the tack strip and lift to stretch the carpet. The point has an opposite flat end seated in the top of the hard plastic handle for hammering when necessary. Handle is rounded to fit the palm comfortably. Net weight: 3 oz.

No. 192 Turning Tool

The turning tool has a bent leg for tucking carpet under “Z” Bar. Push the point to the back of the “Z” bar, then run the point down the length. The tool will tuck as it moves along the “Z” bar. The angled leg offsets the handle from the floor to keep knuckles from rubbing on the carpet. The tool is also useful for light carpet stretching in cramped areas, such as around toilets. Insert the sharp high carbon steel point into the tackless strip and lift to stretch. Net weight: 3 oz.

No. 124 60″ Carpet Cart

This cart has a full-sized 20 inch wide x 60 inch long bed that provides extra support for long and heavy rolls up to 1000 lbs. The tubular steel frame is reinforced with central steel plates for added durability. Four eyelets are provided for tying down the load. The large diameter 16″ pneumatic tubed tires are tall and wide enough to roll up curbs or across gravel. Assembled size: length 60 inches, width 20 inches, height 18 inches. Weight capacity 1,000 lbs. Cart net weight: 42 lbs.

No. 024 Rolling 24″ Tool Box

This fully-featured yet lightweight 24″ toolbox is made from advanced “structural foam” materials. The thick walls are very durable but weigh a lot less. The box rolls level with the ground thanks to a long, top-mounted pull handle that can be conveniently pulled along while walking. The inner tray has features that assist in carpet seaming, including a series of angled recesses which allow steam to escape while also evenly pressuring the seam. Includes a folding, recessed top carrying handle, and integral side handles for lifting with both hands. Case has three latches and a central hasp for locking. Net weight: 16 lbs.

No. 769 Economy Polyester Thread

This thread is three ply waxed 100% polyester hand stitching thread that is wound on a plastic bobbin. The wax coating helps the thread pass smoothly through the carpet that is being sewn. The color is natural (beige) which normally is similar to the color of the carpet’s backing. Polyester thread is economical, but it may stretch more in comparison to our linen thread (No. 771). For this reason, it may show more of the seam when used for carpet seaming purposes. Weight including bobbin: 6 oz.

No. 771 Natural Waxed Linen Thread

This thread is waxed three cord natural linen. It is wound on a cardboard bobbin. The wax coating helps the thread pass smoothly through the carpet that is being sewn. The color is natural (beige) which normally is similar to the color of the carpet’s backing. Works well for hand sewing carpets including hand sewing seams. Net weight including bobbin: 6 oz.

No. 761 2¹/₈” Long Needles

These 2 ¹/₈ inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 25 needles only. Net weight ¹/₂ oz.

No. 762 3″ Long Needles

These 3 inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 25 needles only. Net weight ¹/₂ oz.

No. 765 4″ Curved Needles

These 4 inch, 17 gauge curved sewing needles are sometimes referred to as “mattress needles”, but are also good for sewing carpet. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 12 needles only. Net weight ¹/₂ oz.

No. 712 #12 Open End Thimble, Small

The No. 712 is an English #12 size (U.S.A. size #0) small open-end sewing thimble. This size is suitable for use on a small-sized finger. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the fingertip for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.

No. 713 #13 Open End Thimble, Medium

The No. 713 is an English #13 size (U.S.A. size #00) medium open-end sewing thimble. This size is suitable for use on a medium-sized finger. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the fingertip for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.

No. 714 #14 Open End Thimble, Large

The No. 714 is an English #14 size large open-end sewing thimble. This size is suitable for use on a large-sized finger. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the fingertip for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.

No. 715 #00 Open End Thimble, Thumb

The No. 715 is an extra-large open-end sewing thimble. This size is suitable for use on the thumb. These thimbles have several features that make them useful for carpet sewing purposes. The outer surface includes a coarse grate for pushing a needle point. The open end helps the thimble stay on and exposes the end of the thumb for gripping and other purposes. Formed from brass, and nickel-plated. Sold by each thimble. Net weight: 1 oz.

No. 125 100′ Chalk Line

The Irwin® aluminum chalk line has an aluminum housing and a steel rewind handle for durability. The polyester line delivers 5 – 6 strikes per pull. Large hook provides holding power. The handle locks the line for use as plumb bob. Line length: 100 feet. Holds approximately 2 oz. of chalk. Irwin® is a registered trademark of the Irwin® corporation. Net weight: 8 oz.

No. 135 Keson Chalk Box

The Keson chalk line has a high speed 3X rewind handle for fast retrieval of line. The metal rewind handle can also activate a clutch to release line without spinning. Refill chalk by inserting the chalk bottle nozzle into its “Big Mouth” chalk port. The twisted synthetic line picks up chalk for marking. The impact-resistant plastic body is durable. Refill capacity: 3 oz. of chalk. Line length: 100 feet. Keson® is a registered trademark of the Keson® corporation. Net weight: 8 oz.

No. 080 White Chalk Refill

This Irwin® STRAIT-LINE® standard white marking chalk leaves a temporary mark with high visibility for marking out necessary cuts of carpet. The cap includes a folding extended nozzle that self-seals for fast, precise refills with less waste. Includes 8 oz. of chalk per bottle. Irwin® and STRAIT-LINE® are registered trademarks of the Irwin® corporation.

No. 080B Blue Chalk Refill

This Irwin® STRAIT-LINE® standard blue marking chalk leaves a temporary mark with high visibility for marking out necessary cuts of carpet. The cap includes a folding extended nozzle that self-seals for fast, precise refills with less waste. Includes 8 oz. of chalk per bottle. Irwin® and STRAIT-LINE® are registered trademarks of the Irwin® corporation.

No. 085 5# White Chalk Refill

This Irwin® STRAIT-LINE® standard white marking chalk leaves a temporary mark with high visibility for marking out necessary cuts of carpet. The cap includes a folding extended nozzle that self-seals for fast, precise refills with less waste. Includes 5 lbs. of chalk per jug. Irwin® and STRAIT-LINE® are registered trademarks of the Irwin® corporation.

No. 950 Professional Installers Tool Kit

This kit provides the basic tools of carpet installation, at a price that saves money. The kit includes: No. 024 Rolling 24″ Tool Box, No. 505 Knee Kicker, No. 245 Deluxe Carpet Trimmer, No. 301 Cushion Back Cutter, No. 450 Deluxe Strip Cutter, No. 354 Tool Pouch, No. 135 Keson Chalk Box, No. 080 8 oz. White Chalk, No. 145 Seam Adhesive Bottle, No. 726 Pivoting Carpet Knife, No. 189 Hook Handle Utility Knife, No. 157 Molding Lifter, No. 332 Economy Hammer, No. 152B Cushion Stair Tool, and No. 187 Big-Loop Nap Shears. Net weight: 29 lbs.

No. 675 24″ Carpet Tile Cutter

Cuts carpet tiles, vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Handles materials up to ¾” thick per cut. Built-in wheels allow it to be moved easily from a kneeling position. The movable fence and tile guide can be set for repetitive straight or diagonal cuts. Replacement blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 674 Wood Cutter Blade. Net weight: 38 lbs.