No. 001 Model “A” Tile Cutter

  • Cuts 12” tile straight. Includes two guides for repeat cuts.
  • Highly accurate for precisely matching edges. Straightness of cut: +/-.005”.
  • With floor guide against last field tile, and tile against wall, cuts amount needed.
  • Also includes fast-acting blade height adjustment knobs, and carrying case.

No. 002 Tile Cutter Case Only

  • Carrying case for Crain No. 001 Model “A” Tile Cutter.
  • Streamlined, easy-to-carry design also saves space.
  • Custom-formed interior protects the cutter in transit.
  • Features durable metal latches and recessed handle. Includes case only.

No. 005 Ward Handle

  • Specialized sheetgoods knife with unique blade carrier for mounting blades at different angles.
  • Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
  • Takes Crain No. 012 (Gundlach No. 12-WB) Standard or No. 013 (Gundlach No. 13-WB) Heavy Blades.
  • Takes Crain No. 026A Airway Hook Blades (Gundlach No. 26-AB) with blade screw passing through square hole.

No. 006 Airway Knife

  • Gundlach No. 6 Airway Knife uses specialty blades for vinyl. Comes with a No. 025A straight blade.
  • Takes Crain No. 025A (Gundlach No. 25-AB Straight) or No. 026A (Gundlach No. Hook) blades.
  • Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
  • Body has long, angled blade holder and finger contours to enhance grip. Opens for blade storage.

No. 008 18″ Vinyl Special Tile Cutter

  • Cuts up to 18 inch vinyl tiles straight, or 12 inch tiles diagonally.
  • Steel reinforced blade carrier and large, rigid base ensure straight, accurate cuts.
  • Includes straight guide, diagonal guide, and self-measuring floor guide.
  • With floor guide against last field tile, and tile against wall, cuts amount needed.

No. 012 Ward Standard Blade

  • Pack of 12 Standard Blades (Gundlach No. 12-WB) for No. 005 Ward Handle (Gundlach No. 5).
  • Specialized sheetgoods installation blades with regular profile compared to No. 013 Heavy Blade.
  • Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
  • Packaged in a plastic tube with resealable lid for storage.

No. 013 Ward Heavy Blade

  • Pack of 12 Heavy Blades (Gundlach No. 13-WB) for No. 005 Ward Handle (Gundlach No. 5).
  • Specialized sheetgoods installation blades with regular profile compared to No. 013 Heavy Blade.
  • Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
  • Packaged in a plastic tube with resealable lid for storage.

No. 015 18″ Vinyl Dolly

  • 18” long dollies for moving and unrolling up to 16” rolls of vinyl on the jobsite.
  • Three 18” long heavy gauge tubular steel rollers mounted on double ball bearings to form a rolling bed.
  • Simply pull on the sheet and the material feeds off the roll.
  • Four non-marking rubber wheels are mounted on the sturdy cast aluminum end frames.

No. 016 36″ Vinyl Dolly

  • 36” long dollies for moving and unrolling up to 16” rolls of vinyl on the jobsite.
  • Three 36” long heavy gauge tubular steel rollers mounted on double ball bearings to form a rolling bed.
  • Simply pull on the sheet and the material feeds off the roll.
  • Four non-marking rubber wheels are mounted on the sturdy cast aluminum end frames.

No. 017 Metal Skat Skate Dolly Set

  • Pair of heavy-duty furniture or appliance moving dollies adjustable in length from 24” – 32”.
  • Each dolly has two 8” x 10” load pads and 4 pivoting casters. Total 16 soft urethane casters.
  • Loads are easily moved or change direction. Maximum capacity: 1000 lbs.
  • Welded steel load plates and telescoping tubes. Soft urethane casters won’t scratch most floors.

No. 018 Tile Dolly

  • 11” x 16” dolly for moving heavy boxes of VCT and other tile around the jobsite.
  • Rolls and turns with up to 5 boxes of VCT on its deck or approximately 300 lbs. of material.
  • Includes 5 swiveling casters including one in the middle to help it turn and rotate.
  • Casters have hardened steel brackets and soft urethane rollers that don’t scratch on most floors.

No. 024 Rolling 24″ Tool Box

  • Lightweight 24” toolbox made from durable structural foam materials.
  • Pull along while walking using long, top mounted pull handle.
  • Inner tray has angled recesses allowing steam from the carpet seam to escape.
  • Includes folding handle, side handles, 3 steel latches, and central hasp to lock.

No. 025A Airway Straight Blades (12)

  • Vial of 12 Gundlach No. 25-AB Straight Blades for the Gundlach No. 6 Airway Knife (Crain No. 006).
  • Specialty blades for vinyl installation.
  • Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
  • Packaged in a clear plastic vial with a re-sealable plastic lid for storage.

No. 026A Airway Hook Blades (12)

  • Vial of 12 Gundlach No. 25-AB Hook Blades for the Gundlach No. 6 Airway Knife (Crain No. 006).
  • Specialty blades for vinyl installation.
  • Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
  • Packaged in a clear plastic vial with a re-sealable plastic lid for storage.

No. 038 3″ Economy Notched Spreader

  • 3” wide spreader for spreading base adhesive across the back of 4” wide vinyl or rubber cove base.
  • 1/8” x 1/8” V-shaped notches typically right size for base adhesive (check mfg. recommendation).
  • Blade is made from brushed spring steel with the right amount of flex for spreading adhesive.
  • Blade is riveted to a wide contoured plastic handle.

No. 039 4″ Economy Notched Spreader

  • 4” wide spreader for spreading base adhesive across the back of 6” wide vinyl or rubber cove base.
  • 1/8” x 1/8” V-shaped notches typically right size for base adhesive (check mfg. recommendation).
  • Blade is made from brushed spring steel with the right amount of flex for spreading adhesive.
  • Blade is riveted to a wide contoured plastic handle.

No. 040 3″ Notched Spreader

  • Top quality 3” wide spreader used for spreading base adhesive on the back of 4” wide cove base.
  • Features polished stainless steel blade and attractive lacquered wood handle.
  • 1/8” x 1/8” V-shaped notches typically the right size for this adhesive (check mfg. recommendation).
  • Blade has just the right amount of flex for spreading adhesive.

No. 041 4″ Notched Spreader

  • Top quality 4” wide spreader used for spreading base adhesive on the back of 6” wide cove base.
  • Features polished stainless steel blade and attractive lacquered wood handle.
  • 1/8” x 1/8” V-shaped notches typically the right size for this adhesive (check mfg. recommendation).
  • Blade has just the right amount of flex for spreading adhesive.

No. 046 Replacement Carbide Wheel

  • Replacement carbide wheel for the Crain No. 045 Super Quarry Tile Cutter only.
  • Dimensions: 7/8” diameter x .080” thick.
  • Center hole: .260” diameter
  • No fasteners are included with this carbide wheel. This wheel will not fit other Crain tile cutters.

No. 060 Dexter Linoleum Knife

  • Specialty linoleum knife with 2 1/2” deep hook blade made from high carbon steel.
  • Permanent riveted handle and knife combination.
  • Wood handle is contoured for enhanced grip and has a dark varnished finish.
  • This is the Dexter No. X752 1/2 (EDP No. 52140) Linoleum Knife.

No. 063 Dexter Vinyl Knife

  • Specialty vinyl knife with 2 1/2” deep hook blade made from high carbon steel.
  • Permanent riveted handle and knife combination.
  • Wood handle is contoured for enhanced grip and has a dark varnished finish.
  • This is the Dexter No. VX752 1/2 (EDP No. 52160) Vinyl Knife.

No. 064 Dexter Repl. Vinyl Blade

  • One each replaceable Dexter vinyl blade for use with Dexter 10-D Handle (Crain No. 066).
  • High carbon steel blade ground especially for cutting vinyl.
  • The blade has a threaded tang type stem which threads into the Dexter 10-D Handle.
  • This is the Dexter No. VX752 1/2 D (EDP No. 52170) Replaceable Vinyl Blade.

No. 070 Dexter Custom Handle

  • The Dexter No. 7 Custom Handle is one of the best available knives for vinyl installation.
  • Angled blade holder puts blade at an optimal angle, and keeps knuckles off the floor.
  • Takes specialty Dexter No. 072 Hook Blades with ultra-deep hook for felt-back vinyl.
  • Body has the classic Dexter contour, and pivots open for blade storage by removing end cap.

No. 074 Vinyl Roller Carrying Case

  • Protective case with wheels holds 75 or 100 lb. rollers.
  • Eliminates hand carrying of the roller.
  • Eliminates picking up debris on the roller sections.
  • Includes large handles on top for lifting when necessary, and durable metal latches.

No. 075 75 lb. Vinyl Roller

  • 75 lb. roller with all-steel frame and zinc-plated roller sections for durability.
  • Smooth, radiused roller sections reduce scratching and indentation.
  • Outer sections have recesses for fasteners to prevent wall damage.
  • Case with wheels for transport eliminates hand-carrying and picking up debris on sections.

No. 076 100 lb. Vinyl Roller

  • 100 lb. roller with all-steel frame and zinc-plated roller sections for durability.
  • Smooth, radiused roller sections reduce scratching and indentation.
  • Outer sections have recesses for fasteners to prevent wall damage.
  • Case with wheels for transport eliminates hand-carrying and picking up debris on sections.

No. 078 Aluminum Drives

  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 1/8” hole.
  • Fastener dim.: 1/8” dia. X 7/8” long. Hole: 1/8” dia. x 7/8” deep.

No. 080 White Chalk Refill

  • Irwin® STRAIT-LINE® standard white marking chalk for marking out cuts of carpet.
  • Leaves a temporary mark with high visibility.
  • Cap includes a folding extended nozzle for fast, precise refills.
  • Includes 8 oz. of chalk per bottle.

No. 080B Blue Chalk Refill

  • Irwin® STRAIT-LINE® standard blue marking chalk for marking out cuts of carpet.
  • Leaves a temporary mark with high visibility.
  • Cap includes a folding extended nozzle for fast, precise refills.
  • Includes 8 oz. of chalk per bottle.

No. 081 10” RemGrit® Hacksaw Blade

  • Hacksaw blade made by bonding carbide to a 10” steel rod.
  • In a hacksaw, these blades can cut curves and straight lines in ceramic tile, brick, or marble.
  • Works in tight areas, and cuts equally well on both outward and inward strokes of the saw.
  • Hacksaw not included.

No. 085 5# White Chalk Refill

  • Irwin® STRAIT-LINE® standard white marking chalk for marking out cuts of carpet.
  • Leaves a temporary mark with high visibility.
  • Cap includes a folding extended nozzle for fast, precise refills.
  • Includes 5 lbs. of chalk per jug.

No. 102 Combination Knife

  • Resharpenable knife with long hook edge, deep hook edge, and contoured wood handle.
  • Long hook edge has sharp point for precision cuts, particularly to follow a scored line.
  • Deep hook edge works well for long rough cuts in sheetgoods.
  • Edges are extremely sharp, stay sharp longer, and are easily resharpenable.

No. 103 Long Hook Knife

  • Resharpenable 3” blade with greater thickness for rigidity and durability.
  • Gentle hook forms a sharp point at the end that does the cutting.
  • Superior German steel alloy holds its edge after resharpening long after others have dulled.
  • Wood handle is contoured for comfortable grip.

No. 109 Pin Vise

  • Used for miscellaneous pattern layout scribing for sheet vinyl installation.
  • Also used for marking score lines on vinyl tile.
  • 5 ¾” long handle has precision chuck and screw-on cap for holding replaceable needles.
  • Takes standard Crain No. 129 Scriber Needles.

No. 110 Inside Cove Corner Kit

  • Kit for scribing inside corners includes cove scriber, cove template, and pin vise.
  • Cove scriber scribes lines on the felt for positioning the cove template.
  • Cove template scribes the inside cove pattern onto the vinyl.
  • Cove scriber also scribes a top edge on the vinyl to fit the cap metal. Repl. needles: No. 129

No. 111 6″ Scriber

  • Versatile 6” bar scriber works both as a wall scriber and seam scriber.
  • Includes rounded end guide for wall scribing and bottom guide for seam scribing.
  • The 6” bar provides approximately 5” of length adjustment using the steel thumbscrew.
  • Needle adjusts to material thickness using a screw in the bar (Repl. needle: No. 129).

No. 112 8″ Scriber

  • Versatile 8” bar scriber works both as a wall scriber and seam scriber.
  • Includes rounded end guide for wall scribing and bottom guide for seam scribing.
  • Housing has a hole in the bottom for a second needle for circles or feature strips.
  • 8” bar for approx. 6” of length adjustment. Needle adjusts to material thickness. (Repl. needle: No. 129)

No. 113 6′ Journeyman Straight Edge

  • Six foot steel carpet straight edge.
  • Precision ground for straightness ± .005".
  • Provides the accuracy necessary to prepare carpet seam edges.
  • Includes 45° angle on one end and hanging hole.

No. 113S 4′ Journeyman Straight Edge

  • Four foot steel carpet straight edge.
  • Precision ground for straightness ± .005".
  • Provides the accuracy necessary to prepare carpet seam edges.
  • Includes 45° angle on one end and hanging hole.

No. 116 18″ Flexible Straight Edge

  • 18” long flexible steel straight edge.
  • Bends easily, but returns to its original flat condition.
  • Includes a 45° angle on one end, and a hanging hole on the opposite end.
  • Finished with bright red paint. Dimensions: 18" long x 2" wide x 1/32" thick.

No. 117 32″ Flexible Straight Edge

  • 32” long flexible steel straight edge.
  • Bends easily, but returns to its original flat condition.
  • Includes a 45° angle on one end, and a hanging hole on the opposite end.
  • Finished with bright red paint. Dimensions: 32" long x 2" wide x /32" thick.

No. 1174-A Instant Repair Tool Blades (4)

  • Pack of four replacement blades for the Crain No. 174 Instant Repair Tool.
  • When used in the tool, they cut circular holes in carpet for repairs.
  • Four blades included in the pack can replace all four blades in the tool if desired.
  • Blade dimensions: length: 1.035", width: .50", thickness: .020".

No. 118 39″ Flexible Straight Edge

  • 39” long flexible steel straight edge.
  • Bends easily, but returns to its original flat condition.
  • Includes a 45° angle on one end, and a hanging hole on the opposite end.
  • Finished with bright red paint. Dimensions: 39" long x 2" wide x /32" thick.

No. 119 75″ Combination Edge

  • Includes both a serpent edge on one side and a straight edge on the other.
  • Serpent edge produces less visible seams on “sculptured” pattern carpet.
  • Straight edge is precision ground +/-.005” for cutting carpet seam edges from the back.
  • Made from 75” long 1/8” thick galvanized steel.

No. 119S 36″ Combination Edge

  • Includes both a serpent edge on one side and a straight edge on the other.
  • Serpent edge produces less visible seams on “sculptured” pattern carpet.
  • Straight edge is precision ground +/-.005” for cutting carpet seam edges from the back.
  • Made from 36” long 1/8” thick galvanized steel.

No. 124 60″ Carpet Cart

  • Tubular steel frame includes full-sized 20” wide x 60” long bed.
  • Handles rolls up to 1,000 lbs. 60” length supports long rolls.
  • Includes four steel eyelets for tying down the load and reinforcing center plates.
  • 16” pneumatic tubed tires are tall and wide enough to roll over gravel or up curbs.

No. 125 100′ Chalk Line

  • Irwin® aluminum chalk line features durable aluminum housing and a steel rewind handle.
  • The polyester line delivers 5 - 6 strikes per pull. Holds approx. 2 oz. of chalk.
  • Handle locks the line for use as plumb bob.
  • Line length: 100 feet.

No. 126 Staple Remover

  • Prying lip is ultra-thin to get underneath the staples.
  • Pivoting upper jaw activates automatically to hold the staple against the prying lip.
  • Large leverage handle is ergonomically contoured.
  • Highly effective for removing staples, especially pad staples.

No. 128 .058″ x 9/16″ Scriber Needles (50)

  • For use in Crain No. 194 Outside Corner Scriber ONLY.
  • Dimensions: .058" outside diameter and 9/16" length with sharp point.
  • Made from high carbon steel for long useful life.
  • Packaged 50 needles per container in a durable plastic box with lid that snaps shut.

No. 129 .063″ x 7/8″ Scriber Needles (50)

  • Pack of 50 replacement needles used in most Crain dividers and scribers.
  • Not for use in Crain No. 194 Outside Corner Scriber.
  • Dimensions: .063" in diameter, 7/8" In length, and have a sharp point for scribing.
  • Use in these Crain tools: Nos. 109, 110, 111, 112, 188, 240, 355, 380, 382

No. 130 Staple Hammer

  • Popular and proven Rapid® design has only four moving parts to minimize jams.
  • Clearing jams is easy by releasing a quick-access pin to remove magazine and expose staple channel.
  • Uses Crain No. 141C 3/8" leg chisel point or No. 142D 3/8" leg divergent point staples.
  • Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 135 Keson Chalk Box

  • Provides high speed 3X rewind for fast retrieval of line.
  • 3 way handle rewinds, locks for plumb bob usage, or pivots to release line without spinning.
  • Refills by inserting chalk bottle nozzle in rubber grommet.
  • Strong, braided cotton / polyethylene line provides accurate marking.

No. 141C 3/8″ Chisel Point Staples (5M)

  • For use in our No. 130 Rapid® Staple Hammer.
  • Points are ground to a chisel point.
  • Dimensions: 3/8" leg and 3/8" crown. Packaged 5000 staples per box.
  • Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 142D 3/8” Divergent Point Staples (5M)

  • For use in our No. 130 Rapid® Staple Hammer.
  • Points are ground to a divergent point.
  • Dimensions: 3/8" leg and 3/8" crown. Packaged 5000 staples per box.
  • Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 143 Disposable Adhesive Syringe

  • Large capacity 2 oz. syringe with 2” long 13 gauge needle.
  • Used for repairing bubbles in glued down carpet or vinyl, NOT for hardwood repairs.
  • For use with liquid adhesive such as latex, NOT thick hardwood adhesive.
  • Sale prohibited in: CT, MD, NJ, DE, MA, NY, ME, NH, RI

No. 145 Seam Adhesive Bottle

  • Multi-purpose seam sealer bottle for residential stretch-in or commercial jobs.
  • Plastic applicator includes a lip that hooks on the carpet on residential jobs.
  • Instructions on the bottle explain how cut off lip for commercial jobs.
  • Holds 8 oz. of sealer, but is a bottle only and does not include sealer.

No. 147 Edge Binding Stapler

  • Rapid® Classic 1 design with an added steel guide to adjust the throat opening from 1/8” to 13/16”.
  • With guide adjusted, it staples at a constant distance from the edge of the carpet.
  • Guide is very helpful for edge binding of carpets. Uses Crain No. 148 5/16” Staples.
  • Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 148 Edge Binding Staples (5M)

  • For use in our No. 147 Rapid® Edge Binding Stapler.
  • Dimensions: 5/16" leg and 1/2" crown.
  • Packaged 5000 staples per box.
  • Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.

No. 1500-23 Folding Tail Block

  • Folds square for stretching off outside corners.
  • Put legs at a 135° angle and lock the pivot for stretching off a post.
  • In the flat position, the tail spans 20 inches.
  • Rubber pads help it stay put under load. Wheels help it move fast after the stretch.

No. 1500-U Driving Head Complete

  • Driving head only of our fixed head stretcher.
  • Push button stretch lock is located conveniently on the handle.
  • Visual pin depth adjustment knob located conveniently on the head.
  • No screws or screwdrivers are needed to adjust the pin depth.

No. 151 White Rubber Mallet

  • 20 oz. rubber mallet with while solid rubber head and hardwood handle.
  • Use to tape down metal moldings without scuffing, denting or scratching.
  • Head has two large hammering surfaces that spread the force of impact.
  • Works well with stair tools to prevent glancing and deflection.

No. 1520-Z Swivel-Lock Driving Head Complete

  • Driving head only for our swivel head stretcher.
  • Swivel head provides swivel 60° of free swivel for patterned carpet.
  • Built-in lock pin locks the swivel head in five helpful positions.
  • Push-button conveniently located on the handle for partial stretches.

No. 152B Cushion Stair Tool

  • Tucks carpet into the corner of stair treads, or at the wall between the base and the tack strip.
  • Tool is a full four inches wide to tuck more carpet with each hammer blow.
  • Soft cushion grip absorbs vibration and is textured for grip.
  • Outer edges are angled back to prevent wall contact and tuck all the way into a corner.

No. 154 Narrow Stair Tool

  • Tucks carpet into the corner of stair treads, or at the wall between the base and the tack strip.
  • Blade is only 2 7/8” wide to deliver more concentrated force when malleted.
  • Outer edges are angled back to prevent wall contact and tuck all the way into a corner.
  • Forged from an impact-resistant steel alloy, and nickel-plated.

No. 155 Bent Stair Tool

  • Bent blade of this stair tool can tuck carpet beneath a toe space.
  • Also helpful for tucking carpet underneath Z-bar and under heat registers.
  • Blade is only 2 7/8” wide to deliver more concentrated force when malleted.
  • Forged from an impact-resistant steel alloy, and nickel-plated.

No. 157 Molding Lifter

  • Steel pry bar gets behind wood base and moldings to pry them off with minimum damage.
  • Both ends have slim, wide profile prying surfaces that are polished smooth for safe insertion.
  • Both ends have sharp, beveled nail slots for removing nails and brads with small heads and staples.
  • Made from forged and hardened steel and nickel plated.

No. 159 Vaughan Superbar

  • Vaughan 15” Superbar is the classic heavy-duty pry bar.
  • Includes “shepherd’s crook” rocker end for prying power, and flat end for getting under nails.
  • Includes three beveled nail slots.
  • Both ends polished for insertion behind moldings and base.

No. 161 Notched Carpet Spreader

  • Used to press and hold carpet in the gully as the stretch is released.
  • Causes pins to set better in the carpet’s backing and tucks the carpet.
  • Flexible blade works as 1/16 inch x 1/16 inch “U” notch trowel.
  • Ergonomic blue plastic handle.

No. 162 Plain Carpet Spreader

  • Used to press and hold the carpet in the gully as the stretch is released.
  • Causes pins to set better in the carpet’s backing and tucks the carpet.
  • Blade has no notches for better performance as a tucking tool.
  • Thicker 16 gauge plated steel will not bend under load.

No. 166 Magnetic Driving Bar

  • Long nose hammering tool extends beneath toe-kicks to drive tack strip nails.
  • Hammering tip is magnetized to hold a nail in position.
  • Forged alloy steel body with bonded rubber-like handle.
  • Rubber-like handle reduces impact vibration transmitting to hand and wrist.

No. 172 Magnetic Tack Holder

  • Precision magnetic tip positions and drives nails into difficult areas.
  • Good for fastening tack strip to concrete using hard to hold stubby nails.
  • Saves fingers from being hammered.
  • Made with a 5 ½” long stainless steel body and a powerful magnetic insert.

No. 174 Instant Repair Tool

  • Cuts a three inch diameter circle for removing stained areas from a carpet.
  • Uses four blades to cut the carpet cleanly.
  • Sharp central pivot pin is spring-loaded to adjust automatically to different thicknesses of carpet.
  • Includes plastic cap to protect the body and pin in storage.

No. 175 Tuck Knife

  • Multi-purpose steel blade can tuck carpet near fragile tiles or toilets.
  • Blade also includes a sharp hook edge for heavy cutting, and front edge for scraping.
  • Front edge includes a notch for removing door pins.
  • Durable aluminum body with steel tapping end. Blades are replaceable: Order No. 177.

No. 176 Carpet Layer’s Mitre Box

  • Compact miter box includes straight and 45° angles needed by flooring installers and saves space in the tool box.
  • Steel guides are highly accurate and case-hardened to resist wear even when used with hacksaw.
  • Wood base allows clean cuts through aluminum trims without dulling the hacksaw blade.
  • Base includes synthetic rubber non-slip pad that helps the tool stay put and won’t mark most surfaces.

No. 180 Seam Squeezers

  • Made with a powerful torsion spring and two grippers oriented inwardly to pull seams together.
  • Helpful on glue-down carpet installations to pull and hold seams together.
  • Inward pulling force can be controlled with the amount of hand pressure.
  • Spring arms are vinyl-coated for comfort. Nap grips are replaceable. Sold in set of two.

No. 184 Trimmer Blades (12)

  • Includes a pack of 12 carpet trimmer blades. For use in popular carpet wall trimmers.
  • Blades are bevel ground on the top surface only. Install in the trimmer with bevel side up.
  • Prevents trimmer from rising in the cut, resulting in an accurate height of cut and easier tucking.
  • Blades come in a plastic box with hinged lid that snaps closed for storage.

No. 184C Trimmer Blades (100)

  • Includes a pack of 100 Personna® carpet trimmer blades. For use in popular carpet wall trimmers.
  • Blades are bevel ground on the top surface only. Install in the trimmer with bevel side up.
  • Prevents trimmer from rising in the cut, resulting in an accurate height of cut and easier tucking.
  • Blades are individually wrapped in paper and come in a laminated paper box.

No. 187 Big Loop Napping Shears

  • Offset handles easily held parallel with the floor for trimming carpet tufts.
  • Duckbill rides on top of the carpet to position the top blade.
  • Finger loops are oversized. Right side loop accommodates two fingers for ease of use.
  • Handles are vinyl-coated for ease of grip.

No. 188 Hinge Scriber

  • Highly accurate seam scriber that provides ease of adjustment and good grip and control.
  • Offset distance from the guide to the needle adjusts using a precision thumbwheel.
  • Hinged base folds for easy insertion of the tool at the overlapped seam.
  • Needle height is adjustable. Replacement needles: No. 129

No. 189 Hook Handle Utility Knife

  • Utility and hook blade knife with multiple added contours for improved grip.
  • Wide contoured midsection transitions to a narrow rear hook in proportion to the palm and fingers.
  • Rear hook gives the little finger improved advantage for greater pulling power.
  • Body pivots open for fast access to replacement blades by loosening the folding thumbscrew.

No. 190 Duckbill Napping Shears

  • Offset handles easily held parallel with the floor for trimming carpet tufts.
  • Duckbill rides on top of the carpet to position the top blade.
  • Smaller one inch loops for precision control.
  • Handles are vinyl-coated for ease of grip.

No. 192 Turning Tool

  • Insert the point into the back of the Z-bar, then run it down the length.
  • Angled leg offsets the handle from the carpet to prevent knuckles from rubbing on the carpet.
  • Also useful for light carpet stretching in tight areas.
  • Sharp, high carbon steel point, with rounded hard plastic handle.

No. 194 Outside Corner Scriber

  • Outside corner scriber for outside cove vinyl corners. Works also on rubber and vinyl base.
  • Scribes a line on the side of the corner that remains to be trimmed.
  • Uses the previously trimmed side as a guide using a guide leg with rounded end.
  • Adjustable for various material thicknesses. Replacement needles: No. 128

No. 195 Carpet Awl

  • Sharp, high-carbon steel point penetrates the carpet’s backing for lifting it off the tack strip.
  • Also helpful for light carpet stretching in tight areas.
  • Point has opposite flat steel head seated in the hard plastic handle for hammering.
  • Rounded handle fits the palm comfortably.

No. 196 Heavy-Duty Comfort Knees

  • Extra thick polyurethane skin for increased durability.
  • Polyurethane skin helps prevent build-up of sharp items like splinters that can scratch floors.
  • Designed for floor installers, these pads provide protection for kneeling and knee kicking.
  • Made from flexible neoprene. Machine-washable. Inner knee pad is replaceable.

No. 197 “Comfort Knees” Knee Pads

  • Provides protection for both kneeling and knee kicking, so they stay on at all times.
  • Extra wide straps don’t pinch even when wearing shorts.
  • Contour conforms with the knee whether walking, kneeling or kicking.
  • Made from flexible yet durable neoprene that’s machine-washable. Inner pad is replaceable.

No. 198 Buckle Strap Knee Pads

  • Genuine sponge-rubber knee pads.
  • ½” wide straps include fast and durable hinge-activated buckles.
  • To fasten, insert the angled end of the strap and press the lever down.
  • Buckles hold tight with no carpet fuzz hassle like with hook and loop fasteners.

No. 199 Polyurethane Skin Comfort Knees

  • Polyurethane skin prevents build-up of sharp items such as splinters that scratch floors.
  • Polyurethane is also highly resistant to tearing and penetration, providing extra durability.
  • Designed for floor installers, these pads provide protection for kneeling and knee kicking.
  • Made from flexible neoprene. Machine-washable. Inner knee pad is replaceable.

No. 200 Elastic Strap Knee Pads

  • Genuine sponge-rubber knee pads.
  • The ½” thick rubber provides good comfort and durability.
  • Elastic straps are 1 ½” wide to reduce pinching.
  • Straps include fast-acting hook and loop fasteners.

No. 201 10″ Glue Sticks (19 Pack)

  • 10 inch long glue sticks with standard 7/16” diameter (approx.).
  • They come in a resealable heavy-duty clear plastic bag for storage.
  • Each bag includes one pound of glue or 19 sticks.
  • For use in Crain Nos. 203, 204 or 207 Glue Guns. CAUTION: Melted glue temp. up to 400°F.

No. 202 4″ Glue Sticks

  • 4 inch long glue sticks with standard 7/16” diameter (approx.).
  • They come in a resealable heavy-duty clear plastic bag for storage.
  • Each bag includes 8 oz. of glue or 24 sticks.
  • For use in Crain Nos. 203, 204 or 207 Glue Guns. CAUTION: Melted glue temp. up to 400°F.

No. 203 Glue Gun

  • 80 watt UL listed glue gun.
  • Comes with Crain No. 629 1/8” Nozzle with small diameter extension tube.
  • 1/8” nozzle is helpful for precision carpet seam edge sealing.
  • Also comes with standard nozzle. Works with standard 7/16” diameter glue sticks.

No. 204 Edge Sealing Glue Gun

  • 100 watt glue gun with a carpet edge sealing tip (No. 627) and conventional 1/8” nozzle (No. 629).
  • Carpet edge sealing tip works at an upright handle that allows a convenient pulling motion.
  • Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
  • During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.

No. 206 Leather Knee Pads

  • Ultra-thick padding for greater kneeling comfort.
  • Tough leather wear surface minimizes build-up of sharp objects that can scratch floors.
  • Padding is riveted to the leather.
  • Durable wide straps with steel buckles.

No. 207 High Temp. Glue Gun 220W

  • High powered 220W gun quickly melts glue sticks for high output applications.
  • Use for gluing tack strip and other accessory trims to concrete with acrylic glue sticks.
  • Gun has variable temperature control from 284°F - 428°F and comes with carrying case.
  • Takes standard 7/16" diameter glue sticks (Crain No. 201 10" regular, No. 202 4" regular, or No. 208 10" acrylic).

No. 208 Acrylic 10″ Glue Sticks (19 pack)

  • Quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors.
  • A fast alternative to aluminum drives or contact cement, they set up after 60 – 80 seconds.
  • Includes 19 each 10” long sticks (1 lb. of adhesive) in a self-closing bag for storage.
  • Sticks are standard 7/16” diameter for use in a wide variety of glue guns.

No. 209 Extra Open Time Glue Sticks

  • Provides more time to position materials (approx. 3 minutes).
  • Helpful to position starter boards in hardwood installation.
  • Helpful to position long trim pieces.
  • 10” long sticks, standard 7/16" diameter. Comes 20 sticks (1 lb.) per resealable bag.

No. 217 Hook Handle Razor Knife

  • Slotted razor blade carpet knife with multiple added contours for improved grip.
  • Wide contoured mid-section transitions to a narrow rear hook in proportion to palm and fingers.
  • Rear hook gives the little finger improved advantage for greater pulling power.
  • Body pivots open by loosening the folding thumbscrew for fast access to blades.

No. 223 1/8″ Solid Carbide Drill, Ea.

  • 1/8” solid carbide drill bit with two usable ends.
  • Makes a 1/8” hole in concrete for fastening aluminum drives.
  • Requires Crain No. 225 1/8” Hexagon Adaptor for the drill chuck.
  • Drill RPM must be maintained between 1700 to 3500 RPM.

No. 224 3/16″ Solid Carbide Drill, Ea.

  • 3/16” solid carbide drill bit with two usable ends.
  • Makes a 3/16” hole in concrete for fastening aluminum drives.
  • Requires Crain No. 226 3/16” Hexagon Adaptor for the drill chuck.
  • Drill RPM must be maintained between 1700 to 3500 RPM.

No. 225 1/8″ Hexagon Adaptor

  • Adapts 1/8” solid carbide drill bits to a standard electric drill chuck.
  • Works with Crain No. 223 1/8” Solid Carbide Drill Bits.
  • Shank diameter is 1/4”.
  • Internal collet tightens down on the drill bit to hold it in the adaptor.

No. 226 3/16″ Hexagon Adaptor

  • Adapts 3/16” solid carbide drill bits to a standard electric drill chuck.
  • Works with Crain No. 224 3/16” Solid Carbide Drill Bits.
  • Shank diameter is 1/4”.
  • Internal collet tightens down on the drill bit to hold it in the adaptor.

No. 230 Deluxe Floor Scraper

  • Heavy-duty scraper with 66” long solid steel body.
  • Provides the weight needed to force through and scrape up glued-down flooring materials.
  • Beveled blade carrier deflects material build-up. Case hardened to reduce bending.
  • Includes replaceable 2” wide high carbon steel blade that holds an edge and withstands impact.

No. 231 Replacement Blade

  • Heavy-duty two inch wide blade for use in the No. 230 Deluxe Floor Scraper.
  • Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
  • Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
  • Includes one each blade only.

No. 232 3″ Replacement Blade

  • Wider three inch blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material.
  • Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
  • Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
  • Includes one each blade only.

No. 235 6″ Disposable Cove Base Nozzle

  • Inexpensive, 6” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
  • Evenly spreads 5 beads of adhesive for optimal application onto 6” wide cove base.
  • 5 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
  • End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.

No. 236 3″ Disposable Cove Base Nozzle

  • Inexpensive, 3” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
  • Evenly spreads three beads of adhesive for optimal application onto 3” wide cove base.
  • 3 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
  • End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.

No. 237 Quart Cove Base Gun

  • Uses standard quart cove base adhesive cartridges.
  • Smooth pushrod delivers continuous feed and pressure. Releases using easy-access thumb lever.
  • Handy cartridge tip cutter is built in to the handle.
  • Riveted 5 ½” seal puncture needle pivots out from the body to break the cartridge seal.

No. 238 1/10 Gallon Cove Base Gun

  • Uses standard 1/10 gallon cove base adhesive cartridges.
  • Smooth pushrod delivers continuous feed and pressure.
  • Rod pressure is released for reloading or for stopping the flow using easy-access thumb lever.
  • Durable and economical all-steel construction.

No. 245 Deluxe Carpet Trimmer

  • Trims excess carpet at the wall leaving right amount for tucking.
  • Deluxe trimmer has top-loading blade carriers for fast blade changes.
  • Wide throat area results in smooth flow of carpet to the blades.
  • Six shims for height adjustment and four throat adjustments for various carpets.

No. 246 Carpet Trimmer

  • Trims excess carpet at the wall, leaving just the right amount for tucking.
  • To change blades, remove the blade carrier.
  • Blades are easily accessible from the top of the blade carrier.
  • Shims are relieved for easy reinsertion of the blade carrier, and each has four sockets for throat adjustment.

No. 247 Multi-Purpose Wall Trimmer

  • Rounded wall runner for trimming vinyl sheet goods or cut pile carpets.
  • Anti-friction boot prevents scratching when used to trim vinyl.
  • Spring-loaded center knob for blade height adjustment.
  • Takes slotted razor blades for trimming vinyl, or hook blades for trimming carpet.

No. 250 Troxell Soft R Knee Pads

  • Troxell Super-Soft knee pads size regular/medium in royal blue color.
  • Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
  • Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
  • Straps fasten to the front face of the pad using hook and loop fasteners.

No. 251 Troxell Soft L Knee Pads

  • Troxell Super-Soft knee pads size large in royal blue color.
  • Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
  • Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
  • Straps fasten to the front face of the pad using hook and loop fasteners.

No. 252 Troxell XL Leather Knee Pads

  • Troxell “Leather Head” knee pads, size: large.
  • Durable neoprene construction with leather cover. High density closed cell foam inner pad.
  • Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
  • Straps fasten to the front face of the pad using hook and loop fasteners.

No. 265 Stand-Up Cutter

  • Slices glued-down carpet into strips for faster removal, and great for rough cutting carpet off roll.
  • Comes with sharp, hardened steel point with precision slot to guide utility blade.
  • Point punctures glued-down carpet for fast starts. As pushed it rides on subfloor, lifting carpet to the blade.
  • Heavy-duty fiberglass handle adjusts from 50” – 85” for optimal angle. Takes hook or utility blades.

No. 266 Replacement Point

  • Sharp, hardened replacement point for the No. 265 Stand-Up Cutter with precision slot for utility blade.
  • Quickly punctures glued-down carpet for fast starts.
  • As the point is pushed, it rides on the subfloor and lifts carpet to the blade where it is cut.
  • Includes one each replacement point only. No blades are included.

No. 270 Outside Silver Corner (Each)

  • Silver metal corners for covering a sheet vinyl outside corner.
  • Covers up problems and are an excellent solution for repairs.
  • Made approximately 6” long to cover the corner from floor height up to 6”.
  • Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.

No. 271 Inside Silver Corner (Each)

  • Silver metal corners for covering a sheet vinyl inside corner.
  • Covers up problems and are an excellent solution for repairs.
  • Made approximately 6” long to cover the corner from floor height up to 6”.
  • Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.

No. 272 Outside Gold Corner (Each)

  • Gold metal corners for covering a sheet vinyl outside corner.
  • Covers up problems and are an excellent solution for repairs.
  • Made approximately 6” long to cover the corner from floor height up to 6”.
  • Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.

No. 273 Inside Gold Corner (Each)

  • Gold metal corners for covering a sheet vinyl inside corner.
  • Covers up problems and are an excellent solution for repairs.
  • Made approximately 6” long to cover the corner from floor height up to 6”.
  • Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.

No. 280 H.D. Air Lifter

  • Moves appliances up to 800 lbs. using high pressure air jets, reducing risk of floor damage and injuries.
  • Slide the load plates under the load, turn on the blower, and air plates inflate to lift the load.
  • Air jets create an air cushion to glide the load over hard surfaces. Includes pads for carpet.
  • Includes 2 load plates, 2 HP. motor, shoulder strap, T-connector and hoses, carpet pads and carrying bags.

No. 285 Personna LVT/LVP Knife

  • 45° blade angle of this knife is optimal for scoring and breaking rigid core LVP/LVT.
  • Elevated handle provides knuckle clearance.
  • Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
  • Extra blades can be stored in the handle. Comes with 10 blades. Blades: No. 286C or No. 287.

No. 286C Personna LVP/LVT Blades (100)

  • Specialty blades for No. 285 Personna LVT/LVP Knife.
  • Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
  • Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
  • Pack of 100 blades, incl. 10 "pocket packs" of 10 blades each. Blade dimensions: length: 1.625", width: .75", thickness: .025".

No. 287 Personna LVP/LVT Blades (10)

  • Specialty blades for No. 285 Personna LVT/LVP Knife.
  • Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
  • Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
  • Blister card includes 10 blades. Blade dimensions: length: 1.625", width: .75", thickness: .025".

No. 288 Hook Handle LVP Scoring Knife

  • Takes Accutec® wide-beveled LVP scoring blades.
  • Long blade carrier provides knuckle clearance, while hook handle produces pressure and pulling power.
  • Also takes utility blades, hook blades, and Crain No. 321 hook for tough vinyl.
  • Pivots open for blade storage.

No. 290 Seam Cutter Plus

  • Excels on carpets with zig-zag tufting including commercial loop pile and Berber carpets.
  • Blade runs directly behind row guide, keeping it away from hydra-shift stopovers.
  • Reduces shearing of yarns to produce better looking seams.
  • Also works as a Z-bar or a vinyl molding trimmer.

No. 295C Heavy-Duty Utility Blades (100)

  • Pack of 100 Personna® heavy-duty utility blades which are individually wrapped in paper and packaged in a laminated paper box.
  • These blades can be used in most standard utility knives that take heavy-duty utility blades.
  • Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
  • Blade dimensions: length: 2.40", width: .75", thickness: .025". Individually wrapped blades packaged in laminated paper box.

No. 296 Vaughan Half Hatchet

  • A multi-purpose tool for cutting and hammering down tackless strip.
  • Polished head includes 3 ½” blade and hammering head.
  • Hickory hardwood handle is contoured for gripping.
  • Durable Vaughan quality product made in the USA!

No. 299Y Top Cutter Repl. Blades (10)

  • Pack of 10 blades for the discontinued Crain No. 298 Top Cutter.
  • When used with the Top Cutter, this elongated blade can double cut carpet from the face.
  • For use with the Crain No. 298 Top Cutter only.
  • Blade dimensions: length: 3.00", width: .745", thickness: .025".

No. 300 Loop Pile Cutter

  • Great for rough cutting of carpet off the roll.
  • Versatile design takes slotted razor, utility, or Crain No. 300Y blades.
  • With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarns.
  • Large thumb knob permits simple, fast blade changes.

No. 300Y Loop Pile Cutter Repl. Blades (10)

  • Pack of 10 replacement blades for the Crain No. 300 Loop Pile Cutter. Packaged in a plastic box with hinged lid that snaps shut.
  • Blades have 2 holes for a blade screw on early models of the No. 300 (black plastic body), but also work in later models.
  • When used in the No. 300, they cut the carpet from the backing, reducing the shearing of yarns and wadding up of carpet.
  • Blades are reversible for added life. Blade dimensions: length: 2.31", width: .75", thickness: .025".

No. 301 Cushion Back Cutter

  • Precision blade pockets on left and right side hold slotted blades without screws.
  • Trims seam edges close to the carpet’s tufting to produce better seams.
  • 30° blade angle cuts cushion-back carpets cleanly.
  • Beveled front guide follows the carpet’s rows. Soft grip handle provides comfort and control.

No. 302 Cushion Lock Cutter

  • Offset blade clamp allows fast blade depth adjustment and blade changes. Takes standard slotted razor blades.
  • Front guide has rounded notches to help find rows in difficult carpet including Berbers, hydrashift and commercial level loop.
  • 30° blade angle cleanly trims the carpet's edges for seaming.
  • Soft grip handle provides control and comfort.

No. 303 Loop Pile Cutter

  • Includes base for cutting over pad or other carpet that protects material underneath.
  • Blade carrier is adjustable in height so that it locks down on the rows of carpet.
  • Dual blade pockets on left and right sides, and large thumb knob to lock in the blades.
  • “Triple tight” 3 thumb knob construction helps produce accurate cuts.

No. 304 Versa-Cutter

  • Versatile and durable carpet cutter with steel row guide for improved accuracy.
  • Takes slotted razor, utility, or Crain No. 300Y blades. Dual springs hold the carpet down.
  • With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarn.
  • Steel foot plate reduces wear for long-term durability.

No. 306C Regular-Duty Slotted Razor Blades

  • Pack of 100 Personna® regular-duty (.015" thick) round-edge slotted razor blades.
  • Reduced thickness fits older model Crain tools that take thinner blades (Crain No. 124, 301, 302).
  • Not recommended for newer Crain tools designed for heavy-duty slotted blades (Nos. 308C/309C - .017” thick).
  • Blades individually wrapped and come in a laminated paper box. Blade dim.: length: 2.25", width: .75", thick: .015".

No. 308C Heavy-Duty Round Edge Slotted Razor Blades

  • Pack of 100 Personna® heavy-duty (.017 thick) round edge slotted razor blades.
  • Rounded corners of round edge blades ride on the subfloor without digging in and increasing resistance.
  • Blades are individually wrapped in paper and are packed in a laminated paper box.
  • Blade dimensions: length: 2.25", width: .75", thickness: .017".

No. 309C Heavy-Duty Square Edge Slotted Razor Blades

  • Pack of 100 Personna® heavy-duty (.017 thick) square edge slotted razor blades which are individually wrapped in paper.
  • Square edge blades provide a sharp, precise point for starting a cut with the knife.
  • Square edge blades cut to full depth when used in seam cutters such as Crain No. 301 or No. 302.
  • Blades are packed in a laminated paper box. Blade dimensions: length: 2.25", width: .75", thickness: .017".

No. 310 Dividers

  • Double-needle dividers with rounded radius arm and large wing nut.
  • Legs span from ½” to 6” apart. Needles press fit into the legs.
  • Rounded arm provides smooth adjustment and solid hold.
  • Comes with two needles in the tool and two replacement needles.

No. 311 Divider Repl. Pins (2)

  • Pack of two replacement needles for The No. 310 Dividers.
  • Approximately 7/8” long and 0.060” in diameter.
  • Each needle has a sharp point for scribing.
  • These needles press fit into either leg of the No. 310 Dividers.

No. 320 Vinyl Wall Trimmer

  • Accurately trims sheetgoods net to the wall.
  • Adjustable front guide holds the material in position against the wall.
  • Adjustable rear guide keeps the trimmer running parallel with the wall for smooth trimming.
  • Low profile hand contours help to keep the tool flat against the floor in use. Repl. blades: No. 321.

No. 321 Vinyl Wall Trimmer Blades (3)

  • Pack of three hook blades for the No. 321 Vinyl Wall Trimmer.
  • Reversible blade includes two cutting hook edges.
  • Blades come in a plastic box with hinged lid for storage.
  • Blade dimensions: length: 2.30", width: .50", thickness: .025".

No. 330 Push-Button Carpet Knife

  • Pivots open by pressing the spring-loaded rear button to access the slotted razor blades.
  • Contoured red handle includes knurling on both sides for improved grip.
  • Large radiused fin behind the blade carrier for thumb pressure and improved control.
  • This carpet knife takes slotted razor blades.

No. 332 Economy Hammer

  • 20 oz. claw hammer for hammering down and pulling up tack strip.
  • Forged, induction hardened steel head includes magnetic nail holder.
  • Durable fiberglass handle is jacketed for overstrike protection.
  • Handle includes contoured grip. Fully featured and excellent value.

No. 333 Extension Wall Roller

  • Hand roller for vinyl with three rubber rollers.
  • Rollers produce good pressure without scratching or scuffing.
  • Rolls a 7 ½” section each pass. Recessed axle works close to walls without scratching.
  • Twist-lock tube assembly adjusts handle length from 17” to 27”.

No. 334 6′ Professional Straight Edge

  • Six foot straight edge for making seams in sheet vinyl and like materials.
  • Precision edges are ground for straightness with accuracy of +/-.003”.
  • Made from special spring steel that will return to its flat condition even after being bent.
  • One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 6' x 3" x 1/8".

No. 334S 4′ Professional Straight Edge

  • Four foot straight edge for making seams in sheet vinyl and like materials.
  • Precision edges are ground for straightness with accuracy of +/-.003”.
  • Made from special spring steel that will return to its flat condition even after being bent.
  • One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 4' x 3" x 1/8".

No. 335 Undercut Saw Blade

  • Replacement blade for the No. 336 Undercut Saw for hand undercutting of wood door jambs.
  • Blade includes studs for mounting to the bracket of the No. 336 Undercut Saw.
  • Trapezoidal shape provides clearance.
  • Includes 12” row of 10 point teeth on both sides. Made from high carbon steel for good blade life.

No. 336 Undercut Saw

  • Hand undercutting saw with heavy-duty wood handle, steel bracket, and replaceable 12” blade.
  • Trapezoidal high carbon steel blade includes a row of 10 point teeth on both sides.
  • Saw includes a front knob for working with both hands to increase cutting power.
  • Good for cutting wood door jambs by hand. Replacement blade: No. 335.

No. 337 Duster Brush

  • 8” duster brush made with durable blended horsehair bristles.
  • Tends not to scratch on most floors.
  • Wooden handle is very tough and impact-resistant.
  • Bristle area: 8” long x 2 ½” wide. Handle length: 5”. Great for use with dust pan (Crain No. 666).

No. 339 Flex Undercut Repl. Blade

  • One replacement blade for the Crain No. 338 Flex Undercut Saw.
  • Flexible blade bends at the floor for hand undercutting wood door jambs.
  • Both sides of blade have a 9 inch double row of staggered, ultra-fine induction hardened teeth.
  • Blade provides easier starts, fast cutting, and smooth results.

No. 340 Selvage Trimmer

  • Trims the factory selvage, so the sheet can be accurately scribed and seamed.
  • Insert the selvage edge in the guidance slot, and the blade is properly positioned.
  • Simply pull the tool through the material and the selvage is removed.
  • Replaceable U-shaped blade makes a clean, square cut.

No. 341 Selvage Trimmer Repl. Blade (1)

  • One each replacement blade for the No. 340 Selvage Trimmer.
  • Trims the factory selvage so the sheet can be accurately scribed and seamed.
  • U-shaped blade ensures a smooth, accurate cut.
  • Trimmed edge will be perpendicular to the floor to match an adjacent edge.

No. 342 Selvage Trimmer Repl. Blades (3)

  • One each replacement blade for the No. 340 Selvage Trimmer.
  • Trims the factory selvage so the sheet can be accurately scribed and seamed.
  • U-shaped blade ensures a smooth, accurate cut.
  • Trimmed edge will be perpendicular to the floor to match an adjacent edge.

No. 345 Double Blade

  • Includes one each replacement blade for the Crain No. 344 Score Tool.
  • Marks a score line on plastic laminate or cementitious backer board materials.
  • After scoring, the material breaks along the desired score line cleanly and easily.
  • Blade includes two carbide tips and is reversible in the handle of the No. 344 Score Tool.

No. 346 “J” Roller

  • Hand roller for plastic laminate installation.
  • 3” wide solid rubber roller produces 30 – 45 PSI for positive bonding.
  • Rubber roller material is non-marking.
  • Offset handle and recessed axle allow the roller to work close to the wall without scratching.

No. 348 Square Edge Roller, Long

  • Seam roller for hand rolling vinyl with square edge and long nine inch wooden handle.
  • Square edge and offset bracket allow the roller to work up close to walls.
  • Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
  • Ball bearing construction produces smooth rolling action.

No. 348S Square Edge Roller, Short

  • Seam roller for hand rolling vinyl with square edge and shorter six inch wooden handle.
  • Square edge and offset bracket allow the roller to work up close to walls.
  • Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
  • Ball bearing construction produces smooth rolling action.

No. 349 Round Edge Roller, Long

  • Seam roller for hand rolling vinyl with round edge and long nine inch wooden handle.
  • Round edge of this roller allows it to work up close to vinyl flash coving.
  • Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
  • Ball bearing construction produces smooth rolling action.

No. 349S Round Edge Roller, Short

  • Seam roller for hand rolling vinyl with round edge and shorter six inch wooden handle.
  • Round edge of this roller allows it to work up close to vinyl flash coving.
  • Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
  • Ball bearing construction produces smooth rolling action.

No. 350 Floor Stripper

  • Top quality hand stripper with 12” long handle and zinc alloy head and blade clamp for durability.
  • Blade clamp is fastened with 3 case hardened slotted head screws.
  • Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
  • Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.

No. 351 Stripper Blades (10)

  • Pack of 10 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
  • The .020” thickness provides the right flexibility for fine floor prep. work.
  • These blades work especially well for removing adhesive residue from concrete floors.
  • Vial of ten blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".

No. 351C Stripper Blades (100)

  • Bulk pack of 100 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
  • The .020” thickness provides the right flexibility for fine floor prep. work.
  • These blades work especially well for removing adhesive residue from concrete floors.
  • Vial of 100 blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".

No. 353 Carbide Grout Saw

  • Hand saw for removing old or damaged grout. Angled steel bracket keeps hand from contacting the floor.
  • Comes with carbide blade coated with carbide grit for cutting out grout between tiles. Minimum grout joint width 1/8”.
  • Comes with steel-toothed blade for heavy cleanout work after using the carbide blade.
  • Both blades can be used for thick grout joints or using steel blade to protect walls when sawing near walls.

No. 353Y Grout Saw Replacement Blades (2)

  • Replacement blades for the Crain No. 353 Grout Saw. Minimum grout joint width 1/8”.
  • Includes one carbide blade coated with carbide grit, and one steel-tooth blade.
  • Steel-toothed blade can be used along with carbide blade for wide grout lines.
  • Steel-toothed blade can be used along with carbide blade to protect walls when grout line is close to wall.

No. 354 Pocket Tool Pouch

  • Leather pocket pouch sized 4 ½” wide to slide easily into a pants back pocket.
  • Small items like a knife or row finder wedge securely in the 3” wide x 4 ½” deep inner pocket.
  • Outer flap hooks over the pants pocket to protect it and help keep the pouch from sliding out.
  • Durable stitched and riveted construction. Includes 2” belt slots. Outer dimensions: 4 ½” x 7 ½”.

No. 356 Carbide Hole Saw

  • Tungsten carbide hole saw cuts clean 1 3/8” holes for pipe clearance.
  • Works well on ceramic and soft-bodied quarry tile.
  • Replaceable ¼” masonry bit holds a center. Internal spring ejects the cut piece out.
  • Works with a drill (not included).

No. 360 Pro Stripper

  • Top quality hand stripper with 20” handle for two handed operation and additional reach.
  • Head and blade clamp made from durable zinc alloy. Blade clamp fastens with 3 case-hardened slotted screws.
  • Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
  • Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.

No. 362 Door Pin Tool

  • Steel body includes a wedge with forked edge on one end and a push pin on the other.
  • For hinges that are open at the bottom, insert the pin and tap to push the pin up.
  • Otherwise, insert the fork-shaped edge under the pin and hammer to lift the pin.
  • Once lifted, the fork is used to lift the pin all the way out.

No. 363 Deluxe Door Pin Tool

  • Wedge-shaped tool with forked shaped edge and capture spring to hold the pin.
  • Capture spring holds the greasy pin on the fork so it won’t fall on the carpet.
  • For hinges that are open at the bottom, insert the pin end and tap to force the pin up.
  • Otherwise, insert the fork-shaped edge under the pin and hammer wedge up.

No. 365 Row Separator

  • Double-ended tool with a pointed end for cut pile and a beveled end for loop pile.
  • Pointed end has a narrow point to penetrate the row and a wider conical surface to spread the tufts.
  • Beveled end spreads loops of loop pile and Berber carpets without snagging.
  • Reduces nap shear. Made from solid steel and nickel plated.

No. 366 Commercial Row Finder

  • Ultra-straight spring steel row finder with smooth, rounded notches.
  • Rounded ends easily enter the rows of Berber and loop pile carpets without catching loops.
  • Move back and forth in a sawing action to open the row.
  • Textured plastic handle provides good grip.

No. 367 Residential Row Finder

  • Ultra-straight spring steel row finder with smooth, rounded notches.
  • The pointed ends easily enter the rows of dense cut pile or plush carpets.
  • Move back and forth in a sawing action to open the row.
  • Textured plastic handle provides good grip.

No. 368 Deluxe Hacksaw Frame

  • Sturdy steel frame with 3 ½” throat depth and high-impact plastic pistol grip handle.
  • Comes with steel cutting blade.
  • Frame accepts 10” or 12” blades. Blades are mountable in line with frame or at 90°, 180°, or 270° angles.
  • Frame is plated to resist rust.

No. 369 12” Hacksaw Blades (2/card)

  • Includes two each 12” carbon steel hacksaw blades for use with No. 368 Deluxe Hacksaw.
  • Blades have 32 teeth per inch.
  • Good for cutting aluminum cap metal and other accessory trims using the No. 176 Miter Box.
  • Can also be used to cut mild steel, cast iron or copper.

No. 370 Recess Scriber

  • Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
  • Top portion adjusts the needle height based on material thickness.
  • Bottom portion adjusts offset between needle the guide being used. Offset range: about 2”.
  • Includes rounded end guide for walls and bottom guide for seam scribing. Replacement needles: (No. 371).

No. 371 Recess Scriber Repl. Pin

  • Includes one replacement needle for No. 370 Recess Scriber or No. 375 18” Scribing Tool.
  • Needle diameter: approx. 0.063”
  • Needle length: 1 1/2
  • Needle is sharp on one end for scribing.

No. 372 18″ Scribing Tool

  • Accurately scribes longer widths from 2” to 16”. Needles are replaceable (No. 371).
  • Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
  • Top portion adjusts the needle height based on material thickness.
  • Bottom portion adjusts offset from the rounded end guide for walls or bottom guide for seam scribing.

No. 375 Big Scraper

  • Stand-up telescoping tube scraper with wide 8” blade for heavier removal work.
  • Telescoping tubular handle adjusts from 39” to 59” using a simple twist lock mechanism.
  • Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
  • Great for stand-up scraping work. Comes with a No. 376 .037” thick blade, and blade cover.

No. 375S Short Big Scraper

  • Shorter version of the Big Scraper with telescoping tubes and wide 8” blade for use while kneeling.
  • Telescoping tubular handle adjusts from 19” to 26” using a simple twist-lock mechanism.
  • Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
  • Great to scrape wider sections while kneeling. Comes with No. 376 .037” thick blade, and blade cover.

No. 376 Big Scraper Blades (3)

  • Pack of 3 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
  • Wide 8” blade removes the widest section of material of any Crain scraper blade.
  • Good for hand scraping of heavier adhesive residue.
  • Comes in plastic vial of 3 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.

No. 377 Big Scraper Blades (9)

  • Pack of 9 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
  • Wide 8” blade removes the widest section of material of any Crain scraper blade.
  • Good for hand scraping of heavier adhesive residue.
  • Comes in plastic vial of 9 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.

No. 380 Deluxe Dividers

  • Forged steel bent leg with sharpened point and adaptable straight leg for marking.
  • Adaptable straight leg takes a scriber with needle or inking leg.
  • Scribes up to 14” span. Bent center leg permits easier scribing along walls.
  • Knurled steel thumb screws & needle holders. Repl. needle: No. 129. Inking leg: 1380-P

No. 382 Double-Needle Dividers

  • Rounded body fits comfortably in the user’s hand.
  • Bent leg and removable straight leg spans up to six inches.
  • Adjusts using a folding thumbscrew. Bent leg allows easier wall scribing.
  • Both legs have knurled steel caps to hold replacement needles (No. 129).

No. 390 Inertial Scraper

  • Hand scraper with metal knob handle for hammering with a rubber mallet to scrape hard spots.
  • Knob also has rounded edges to fit the palm.
  • Long 18” handle, steel reinforced head, and blade clamp with three case hardened screws.
  • Comes with a wide 5” blade (No. 391) with .037” thickness of our Big Scraper blades for heavy removal work.

No. 391 Inertial Scraper Blades (10)

  • Pack of ten replacement blades for the Crain No. 390 Inertial Scraper.
  • Wide 5” blades are made with the same .037” thickness as our heavy-duty Big Scraper blades.
  • Stout blades can scrape up hard spots.
  • Come in a plastic vial of ten blades with resealable cap.

No. 400 ½” Carbide Wheel

  • Replacement carbide wheel for Crain Nos. 030, 031, 032X, and 033X Ceramic Tile Cutters.
  • Wheel dimensions: approximately 1/2” in diameter x .075” thick.
  • Wheel center hole: 1/4” diameter.
  • Replacement fasteners including a steel bushing, washer, screw and lock nut are included.

No. 401 6-in-1 Screwdriver

  • Converts between 4 most needed Phillips and slotted screwdriving tips, and provides 2 nutdriver sockets.
  • Includes #1 and #2 Phillips tips, 3/16" and 5/16" slotted tips, and 1/4" and 3/16" nutdrivers
  • Made with high-impact plastic ribbed handle for sure grip.
  • Heat-treated alloy steel socketed drive shaft.

No. 407 Square Leather Tool Pouch

  • Square leather pouch hangs from the belt.
  • Deep 3 ¾” x 5 ½” rectangular pocket with 1” wide opening to quickly insert larger items.
  • 2 ¼” wide slots go onto most belts.
  • Durable riveted construction. Outer dimensions: 4 ¼ x 7”.

No. 420 Trowel 1/16 x 1/16 x 1/16 Square Notch

  • 1/16” open x 1/16” flat x 1/16” deep square-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade. Add "L" to the No. 420 for left-handed model (i.e. No. 420L).

No. 420L Trowel 1/16 x 1/16 x 1/16 Square Notch, Left

  • 1/16” open x 1/16” flat x 1/16” deep square-notched trowel. Blade is notched on the left side of the blade for left-handed users.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 421 Trowel 1/16 x 1/4 x 1/16 V Notch

  • 1/16” open x 1/4” flat x 1/16” deep V-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 422 Trowel 1/16 x 1/32 x 1/32 U Notch

  • 1/16” open x 1/32” flat x 1/32” deep U-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade. Add "L" to the No. 422 for left-handed model (i.e. No. 422L).

No. 422L Trowel 1/16 x 1/32 x 1/32 U Notch, Left

  • 1/16” open x 1/32” flat x 1/32” deep U-notched trowel. Blade is notched on the left side of the blade for left-handed users.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 423 Trowel 1/8 x 1/16 x 1/8 V Notch

  • 1/8” open x 1/16” flat x 1/8” deep V-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade. Add "L" to the No. 423 for left-handed model (i.e. No. 423L).

No. 423L Trowel 1/8 x 1/16 x 1/8 V Notch, Left

  • 1/8” open x 1/16” flat x 1/8” deep V-notched trowel. Blade is notched on the left side of the blade for left-handed users.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 424 Trowel 3/32 x 3/32 x 3/32 V Notch

  • 3/32” open x 3/32” flat x 3/32” deep V-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 425 Trowel 1/4 x — x 3/16 V Notch

  • 1/4” open x 3/16” deep V-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 426 Trowel 1/4 x 1/4 x 1/4 Square Notch

  • 1/4” open x 1/4” flat x 1/4” deep square-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 427 Trowel 1/2 x — x 1/2 V Notch

  • 1/2” open x 1/2” deep V-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading adhesive or mortar in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 428 Trowel 1/4 x 1/4 x 3/8 Square Notch

  • 1/4” open x 1/4” flat x 3/8” deep square-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 429 Trowel 1/2 x 1/2 x 1/2 Square Notch

  • 1/2” open x 1/2” flat x 1/2” deep square-notched trowel.
  • The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 430 Trowel 1/8 x 1/16 x 1/8 U Notch

  • 1/8” open x 1/16” flat x 1/8” deep U-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 431 Trowel 1/16 x 1/16 x 1/16 V Notch

  • 1/16” open x 1/16” flat x 1/16” deep V-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 432 Trowel 3/16 x 1/2 x 1/4 V Notch

  • 3/16” open x 1/2” flat x 1/4” deep V-notched trowel.
  • Front edge is square and is notched for "cutting in" or spreading adhesive in tight areas like corners.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 433 Trowel 1/8 x 1/16 x 1/8 V Notch

  • 1/8” open x 1/16” flat x 1/8” deep V-notched trowel.
  • Front edge is angled back 10° for clearance when spreading close to the wall.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 434 4″ x 14″ Finishing Trowel

  • 4” wide x 14” long trowel with no notches.
  • Useful for spreading patch.
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 435 Flex Axle Roller

  • Made with two pivoting axles each with seven steel star wheel wheel rollers (14 total).
  • As the roller is moved forward and backward, the axles pivot outwardly then inwardly.
  • This action mixes carpet fibers and pulls the seam edges together.
  • Star wheels press the carpet’s backing into the adhesive.

No. 436 Straight Axle Roller

  • Solid axle with ten steel star rollers.
  • Star wheels effectively press the carpet’s backing into the hot melt adhesive.
  • Welded steel handle bracket is plated.
  • Rounded handle fits well in the palm of the hand.

No. 437 Big Foot Roller

  • Made with wide ribbed roller sections.
  • Wide surface area on the ribbed surfaces protect delicate fibers better than star wheels.
  • Ribs produce concentrated pressure forcing carpet backing into the adhesive.
  • Best roller for fine denier saxony, plush, and velvet carpets.

No. 438 6″ Pro Roller

  • Solid axle spans six inches wide and has 18 steel star wheel rollers.
  • Provides adequate pressure even with 6” tape.
  • Steel bracket and handle stem are welded and plated for durability.
  • Hard plastic handle is rounded to fit well in the palm of the hand.

No. 439 4″ x 16″ Rounded Corner Finishing Trowel

  • 4" wide x 16" long trowel with no notches for spreading patch.
  • All four corners are rounded at a 2” radius to prevent them from gouging the patch
  • Wooden handle is curved for comfortable grip.
  • Handle bracket is welded to the spring steel blade.

No. 445 Knee Kicker

  • Recessed trigger for length adjustment in five settings from 17¾" to 21¾".
  • Visual pin depth dial provides nine different depth settings.
  • Power rods through pin plate provide support and improved force transfer.
  • Three nap grips, pin plate with 16 pins, standard thickness bumper.

No. 450 Deluxe Strip Cutter

  • Long 1 7/8” blades cut wide architectural strip straight in a single cut.
  • Cuts regular strip straight or diagonally in a single cut.
  • Blade stabilizer prevents splaying of the blades to increase cutting efficiency.
  • Handle includes blade storage, travel adjustment, and locker for closing in storage.

No. 451 Strip Cutter Blades (12)

  • Package of 12 replacement blades for the Crain No. 450 Deluxe Strip Cutter.
  • Cuts wide architectural strip straight in one cut.
  • Cuts regular strip straight or diagonally in one cut.
  • Packaging includes clear plastic box that snaps shut for storage.

No. 455 Strip Saver Bag

  • Heavy-duty cloth bag slips over standard sized tack strip boxes.
  • Extra protection prevents boxes from tearing open to protect the strip.
  • Reinforced end panel with heavy-duty zipper and double-stitched handle.
  • Projects a professional image and improves efficiency.

No. 460 Vinyl Sealer Bottle

  • Sealer bottle for sheet vinyl seams with non-marking stainless steel tip.
  • Precision formed stainless steel tip delivers the right amount of sealer.
  • The shape of the tip forms a fin that rides on the seamline to deliver sealer directly over the seam.
  • Directions for usage printed on each bottle. Bottle holds up to 6 oz. of sealer.

No. 470 Glue Bottle

  • Great for storing and spreading adhesives. Lid seals tight to extend adhesive life.
  • High-impact plastic bottle holds up to 16 oz. of adhesive.
  • Narrow brush allows accurate application of adhesive, particularly in tight areas.
  • Metal lid includes extendable brush that goes to the bottom of the bottle.

No. 476 Carpet Tractor

  • Includes three 2 ½” rows of star wheels mounted on a durable steel body.
  • Produces pressure on the seam to press the backing into the adhesive.
  • The three rows of star wheels mix yarns to reduce visibility.
  • Long, rounded body is optimal for hand pressure.

No. 486 Safety Glasses

  • Economical impact-resistant safety glasses.
  • Soft sides create comfortable fit against the face.
  • Include elastic strap.
  • Clear direct ventilated frame permits peripheral vision.

No. 496 8″ Carpet Shears

  • Angled handles easily position the blades for trimming off carpet tufts.
  • Extra-long 3” blades.
  • Finger loops are oversized for large fingers.
  • Right side loop accommodates multiple fingers for easy activation.

No. 497 Case with Driving Head

  • Includes the driving head, tail block, transfer tube and head case.
  • Head case additionally holds an Auto-Lok tube and three extension tubes (not included).
  • Head case has wheels for easy transport.
  • Head case is made from tough blow-molded plastic with recessed latches and handles.

No. 498 Case with Tubes & Auto-Lok

  • Includes three extension tubes, Auto-Lok tube, and tube case.
  • Tube case has recesses that hook on our head cases with wheels for easy transport.
  • Made from tough yet lightweight high-density blow-molded plastic.
  • Recessed latches and handles improve durability.

No. 498E Empty Tube Case

  • Includes the tube case only. Holds an Auto-Lok tube and up to three additional extension tubes.
  • Tube case has recesses that hook on our head cases with wheels for easy transport.
  • Made from tough yet lightweight high-density blow-molded plastic.
  • Recessed latches and handles improve durability.

No. 499 Double Case Stretcher

  • Power handle has built-in stretch lock for partial stretches.
  • Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
  • Pin depth adjustment knob adjusts without screws or screwdrivers.
  • Double case design distributes weight and provides room for extra components. Built-in wheels for transport.

No. 499E Empty Stretcher Cases

  • Includes both head and tube cases.
  • Holds the driving head, transfer tube, tail block, Auto-Lok tube, and 7 more extension tubes.
  • Head case includes wheels, and tube case hooks on the head case for easy transport.
  • Cases split to distribute weight. Also holds Roberts 10-239.

No. 500 Single Case Stretcher

  • Power handle has built-in stretch lock for partial stretches.
  • Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
  • Pin depth adjustment knob adjusts without screws or screwdrivers.
  • Space saving single case design includes wheels for transport.

No. 500Z Cotton Head

  • For use on Crain No. 499 and 500 Power Stretchers.
  • Recommended when stretching Berber, loop pile, and low-level commercial carpets.
  • Wire nap grips are less likely to pull or snag loops.
  • Installs easily. Nap grips are replaceable.

No. 501 Auto-Lok Tube

  • Provides ultra-fast length adjustment for a connected train of extension tubes!
  • Push back on the tubes to extend, push buttons and pull back to shorten.
  • Adds up to 4 feet 8 inches to the stretcher in convenient 1½ inch increments.
  • Works with standard-sized diameter tubes.

No. 502 3′ Extension Tube

  • Adds up to 4 feet 8 inches of length.
  • Holes are punched rather than drilled for durability and precision.
  • Buttons are rounded for smooth tube adjustment.
  • Works with other standard size diameter poles.

No. 503 Empty Single Case

  • Includes the head case only.
  • Holds the driving head, transfer tube, tail block, Auto-Lok tube, and up to 3 additional extension tubes.
  • Case has wheels for easy transport.
  • Tough yet lightweight blow-molded plastic. Latches and handles are recessed for added durability.

No. 505 Knee Kicker

  • Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
  • Visual pin depth dial provides nine settings for various carpets.
  • Power rods through pin plate provide support and improved force transfer.
  • Three nap grips, pin plate with 16 pins, standard thickness bumper.

No. 507 Stairway Stretcher

  • Provides a full and uniform stretch across the stair tread.
  • Begin at the top of the stairs and work downwards.
  • Stretch then tuck the stair below. Prevents sore knees!
  • Comes with carrying case.

No. 510 Lever Extension Tube

  • Top hand lever permits fast extension or retraction of the stretcher tail.
  • Bottom floor lever unlocks when the stretcher head is lifted off the floor, allowing head to extend or retract.
  • Floor lever includes lock pin to lock the floor lever as desired (including for transport).
  • Works with other Junior Power Stretchers with standard size poles (1 3/4" inside diameter).

No. 513 Seam Repair Attachment

  • Replacement part for No. 512 Mini-Stretcher or No. 514 Mini-Stretcher w/Seam Att.
  • When attached, works as seam repair stretcher by pulling carpet together.
  • Can also be used for pattern matching when attached.
  • Top knob provides fast adjustment of pin depth.

No. 515 Mini-Stretcher with Seam Repair Attachment

  • Dual pivoting gripper heads for precision pattern matching.
  • Restretch with the open top wall blade for fast tucking
  • Quick change pushbuttons for attaching gripper heads and wall blade on either end.
  • Comes with carrying case. Tall seam repair legs are sold separately (No. 519).

No. 516 3′ Aluminum Stretcher Tube

  • Lightweight and rustproof.
  • Adds up to 4 feet 8 inches of length to a stretcher in 4 inch increments.
  • Score line on inner and outer tubes to align buttons with holes during length adjustment.
  • Works with other standard sized tubes.

No. 517 5′ Aluminum Stretcher Tube

  • Lightweight and rustproof.
  • Adds up to 8 feet 8 inches of length to a stretcher in 4 inch increments.
  • Score line on inner and outer tubes to align buttons with holes during length adjustment.
  • Works with other standard sized tubes.

No. 518 Stair Claw

  • Stretches carpet across the stair tread and forms it around the nosing.
  • Hook the teeth in the carpet near the nosing, then pull down on the handle.
  • A pulling action is generated that stretches the carpet.
  • Bottom edge tucks up under the nosing. Recesses allow easy stapling.

No. 519 Tall Seam Repair Legs

  • Two tall seam repair legs only for Crain No. 515 Mini-Stretcher.
  • They create a 9” high by 10” wide working area to run a seaming iron beneath the stretcher.
  • Legs include quick release pin to connect to the stretcher and holes for fastening to pin plate assembly.
  • Stretcher and pin plate assemblies are sold separately.

No. 520 Swivel-Lock Stretcher

  • 60° of free swivel for patterned carpet. Head locks at straight, 15° or 30° angles.
  • Power handle has built-in stretch lock for partial stretches.
  • Comes with Lever Extension tube, 3 extension tubes, and transfer tube.
  • Comes with folding tail block. Available in double cases only.

No. 520Z Cotton Head

  • For use on Crain No. 520 Swivel-Lock Stretchers.
  • Recommended when stretching Berber, loop pile, and low-level commercial carpets.
  • Wire nap grips are less likely to pull or snag loops.
  • Installs easily. Nap grips are replaceable.

No. 523Y 23″ Seammate Repl. Blade

  • Includes three replacement blades for the Crain Seammate doorway seaming tool.
  • Each blade has a 23” long razor sharp edge for scoring the carpet’s backing at the doorway seam location.
  • Marks a straight line on the carpet’s backing which can be trace cut with a knife.
  • Blade dimensions: length: 23.27", width: .560", thickness: .020".

No. 525 Wide Knee Kicker

  • Wider head with 4 gripper inserts and an extra row of pins moves more carpet each kick.
  • Extra thick bumper absorbs more impact for comfort.
  • Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
  • Visual pin depth dial provides nine settings for various carpets.

No. 532 Topset Gouge

  • Forms a 5/32” wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners.
  • Groove removes excess fullness at the corner that can cause the base to pucker and gap.
  • Grooving depth adjustable using knurled steel nut. Rounded wood handle comfortably fits the palm.
  • Blade is replaceable and resharpenable (No. 533).

No. 533 Replacement Blade

  • Includes one each replacement blade only for the Crain No. 532 Topset Gouge.
  • Forms a 5/32” wide groove on the back side of vinyl or rubber cove base.
  • Produces tight-wrapped corners by reducing excess fullness which can cause gaps and puckering.
  • Blade is resharpenable.

No. 535 3′ Carpet Straight Edge

  • Three foot aluminum straight edge useful for most carpet installation purposes.
  • Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
  • Includes 45° angle on one end, and a hanging hole on the other.
  • Economical and lightweight. Dimensions: 36" long x 2 1/2" wide x 3/16" thick.

No. 536 6′ Carpet Straight Edge

  • Six foot aluminum straight edge useful for most carpet installation purposes.
  • Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
  • Includes 45° angle on one end, and a hanging hole on the other.
  • Economical and lightweight. Dimensions: 72" long x 2 1/2" wide x 3/16" thick.

No. 543 Aviation Snips

  • Top quality compound leverage metal snips great for making straight cuts in aluminum accessory trims.
  • Alloy steel blades make up to 1 11/16” long cuts and provide durability for long term performance.
  • Handles include “soft-touch” grips which reduce twisting in the hand under forceful squeezing.
  • Can cut sheet metal when necessary.

No. 550 5000 Series Hammer Tacker 1/2″ Crown

  • Economical hammer tacker for stapling pad takes 5000 series pad staples, ½” crown x 5/16” leg.
  • Bottom-loading magazine makes loading staples or clearing jams easy.
  • All-steel driving mechanism is durable.
  • Thick rubber grip provides comfort and control.

No. 553 Engineered Wood Stapling Tool

  • Adjustable stapling tool that works close to walls generally within the width of one board.
  • Adjusts to different engineered plank thicknesses from 3/8” to 3/4” with the adjustable foot plate.
  • Insert a staple in the channel and hammer into the subfloor using the unique offset driver.
  • Tool includes separator for separating individual staples. Takes 18 gauge (1/4" crown) staples.

No. 556 Carbide-Tipped Blade

  • Replacement carbide-tipped blade for use on Crain No. 545 or No. 555 undercut saws.
  • 36 tooth blade approximately 5 ½” diameter blade.
  • For use cutting wood base, moldings, door jams and drywall only.
  • Not for use in cutting metal, masonry, ceramic tile, or stone.

No. 560 Knuckle Head Pull Bar

  • Steel pull bar designed to take heavy hammering when necessary to pull planks together.
  • Boxed “knuckle-shaped” hammering head is welded to the body.
  • 3/16” thick body is made 3” wide to reduce bending down the length as tool is hammered.
  • 16 1/2” long overall for 14 1/2” working room when used near wall. Felt pads reduce scratching.

No. 562 Plastic Spacers (10)

  • Maintains expansion gap between the wall and the plank even when the wall is undercut.
  • With the V-shape, one end goes in the gap, and the other braces on the face of the plank.
  • Two ends have different thicknesses, one 3/16” and the other 1/4” for manufacturer’s specifications.
  • Eliminates tipping problems with other spacers. Comes in a pack of 10 spacers.

No. 563 Tapping Block

  • Block for tapping and moving planks while also protecting the edges of the plank.
  • Block is sized 3” wide x 7” long x ¾” thick. Bottom is relieved on a side and an end.
  • Put the block on a plank at a relieved edge and it can tap the plank against its outer edge.
  • Reduces risk of chipping the plank. Large plastic handle makes it easy to move and position.

No. 564 Variable Wall Spacer

  • Used to space planks from the wall to form the expansion gap necessary with plank floors.
  • Provides variable spacing when the wall adjacent to the planks is not straight.
  • Large threaded pushrod is turned using the oversized ergonomic twist knob.
  • Knob has a steel hex insert for a hex wrench. Pressure pad has rubber insert to protect walls.

No. 565 18′ Strap Clamp

  • Pulls planks together across lengths of up to 19 feet.
  • Nylon strap coils internally as strap is retracted and stays out of the way.
  • Long base hooks onto planks even under toe spaces.
  • Includes large knob for rapid retraction after clamping is complete.

No. 566 Strap Clamp Bullnose Adaptor

  • Adaptor to Crain No. 565 18’ Strap Clamp holds bullnose in place as the glue dries, or for hands-free nailing.
  • Slides on the base of the clamp to create a large, radiused clamping surface conforming to 1” bullnose material.
  • Radiused clamping surface includes a felt pad to prevent scratching the bullnose.
  • Strap Clamp and adaptor sold separately.

No. 569 11 3/4″ Tapping Block

  • 113/4” solid plastic block with a long, U-shaped handle for greater control.
  • Use with a hammer to tap the sides or ends of the boards to eliminate gaps. Reduces risk of damage.
  • Relieved on one side and one end to fit over the tongue of the board and contact squarely against the side.
  • Dimensions: 3” wide x 113/4’ long x 3/4” thick.

No. 570 Clear Can

  • Great way to store nails and quickly dispense them on the job.
  • Resealable lid is threaded on the clear plastic body and is easily removed to add nails.
  • Squeezing the clear plastic body opens the lid to dispense the right amount of nails.
  • After releasing, lid closes and won’t spill. Lid and bottom made from durable thick ribbed vinyl.

No. 575 Multi-Undercut Saw

  • Compact, 8 AMP undercut saw works best for fast undercutting of jambs. Also cuts walls and inside corners.
  • Height of cut adjustable from flush to 1” above floor level. Handle folds for undercutting toe-kicks.
  • Dual-angle depth gauge allows cutting at “straight on” or 45° angles. Maximum depth of cut: 1 1/4".
  • Comes with carbide blade, carrying case, blade wrench, and instructions.

No. 576 LVP Angle Tapping Block

  • Lifts the LVP plank to the angle where it can be tapped and locked tight.
  • Large upper plastic block contacts just below the face of the plank. Lower plastic contact plate extends to contact the core.
  • Comes with three 1mm shims and two 3mm shims for planks up to 10mm thick.
  • Extra contact plates and shims sold separately.

No. 580 Aluminum Drives

  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 1/8” hole.
  • Fastener dim.: 1/8” dia. X 5/8” long. Hole: 1/8” dia. x 3/4” deep.

No. 605 Deluxe Knee Kicker

  • High profile body more easily spans over stretcher tubes, plus thicker rubber bumper.
  • Recessed trigger provides 5 length settings from 18 ½” to 22 ½”.
  • Visual pin depth dial provides nine depth settings for various carpets.
  • Power rods support the pin plate and improve force transfer to the carpet.

No. 617 Staple Saver Box (5418)

  • Designed specifically to hold Duo-Fast No. 5418 Electric Tacker Staples.
  • Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
  • Protects boxes and staples in the tool box.
  • Duo-Fast® is a registered trademark of the Duo-Fast® corporation.

No. 618 Staple Saver Box (7512)

  • Designed specifically to hold Duo-Fast® No. 7512 Hammer Tacker Staples.
  • Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
  • Protects boxes and staples in your tool box.
  • Duo-Fast® is a registered trademark of the Duo-Fast® corporation.

No. 619 Shur-Fast® Staples (5M)

  • Unique thermoplastic coating and precision ground “sharp point” (SP) 60° angle points.
  • Efficiently penetrate hardwoods for greater holding power.
  • Preferred for use in Crain electric tackers for reduced misfiring and jamming.
  • 9/16” Leg - 3/16” crown - 20 GA. Shur-Fast® is a registered trademark of the Shur-Fast® corporation.

No. 627 Carpet Edge Sealing Tip

  • Precision glue tip only for popular glue guns at an upright angle in a convenient pulling motion.
  • Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
  • During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
  • Standard thread (7/16" - 20) fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes.

No. 628 1/4″ Nozzle

  • 1/4” diameter nozzle with crimped end. Good for seam edge sealing.
  • Thin opening (1/32” high x 7/32” wide) delivers narrow cross section of glue.
  • Works in Crain Nos. 203, 204 or 207 Glue Guns or others with standard thread.
  • Thread size: 7/16" major diameter- 20 threads per inch.

No. 629 1/8″ Nozzle

  • Extended 1/8” tube (.085” inside diameter) nozzle.
  • Works well for sealing the edges of carpet seams.
  • Works in Crain No. 203, 204 or 207 Glue Guns or others with standard thread.
  • Thread size: 7/16" major diameter- 20 threads per inch.

No. 635 Opto Power Tacker

  • Ruggedized control board includes electronic sensor that fires in response to motion of a tough sliding trigger.
  • Eliminates the delicate mechanical microswitch that frequently required repair. Powerful 11 AMP solenoid drives into hardwoods.
  • Long, slender nose more easily parts yarns and penetrates down to the backing for stapling.
  • Short height, narrow profile, and rounded cap help it get into tight areas.

No. 666 Dust Pan

  • Professional grade dust pan stamped from a single sheet of 20 gauge steel.
  • Beveled lip is 12” wide for sweeping in debris.
  • Formed with large corrugated ribs in the pan and at corners for extra stiffness and durability.
  • Painted blade with baked-on enamel finish.

No. 673 13″ Wood Cutter

  • Cuts plank flooring materials up to ¾” thick. Comes fully assembled.
  • Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
  • Includes wheels allowing the cutter to be easily moved from a kneeling position.
  • Movable fence positions planks for straight or 45° diagonal cuts plus cut guide for repeat cuts

No. 675 24″ Carpet Tile Cutter

  • Cuts carpet tiles, soft vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Works on materials up to ¾” thick.
  • Includes wheels allowing the cutter to be easily moved from a kneeling position.
  • Movable fence and tile guide can be set for repetitive straight or diagonal cuts.
  • Comes fully assembled. Repl. blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 676.

No. 679 9″ Wood Cutter

  • Cuts plank flooring up to 3/4” thick. Cuts up to 9” wide planks.
  • Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
  • Movable fence positions the material on either side of the blade for increased blade life.
  • Comes fully assembled. Replacement blade: No. 681 9” Wood Cutter Blade.

No. 684 Extension Cord

  • 25 foot long 16 gauge 3 conductor grounded extension cord.
  • Constructed for use with power tools indoors or outdoors.
  • Rated for usage up to 13 AMPs at 125 volts.
  • Plug and receptacle are molded on the cordage for durability.

No. 687 Stand-Up Carpet Peeler Pin

  • One each steel replacement pin for the No. 686 Stand-Up Carpet Peeler.
  • This pin is driven beneath the carpet and peels it back using the leverage of the tool.
  • Made from hardened steel with sharp point.
  • Easily punctures and gets beneath glued-down carpet.

No. 701 4” x 6” Vinyl Blade

  • Hardened, high-carbon steel blade has a 6” long sharpened edge.
  • Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on one side only.

No. 702D 4” x 6” Double-Edge Vinyl Blade

  • Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
  • Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.

No. 703 5” x 6” Carpet Blade

  • Hardened, high-carbon steel blade has a 6” long sharpened edge.
  • 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on side only.

No. 704D 5” x 6” Double-Edge Carpet Blade

  • Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
  • 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.

No. 705 3” x 10” Multi-Purpose Blade

  • Hardened, high-carbon steel blade has a 10” long sharpened edge.
  • Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions 3” tall x 10” wide x .079” thick. Sharp edge is ground to a 30° bevel on one side only.

No. 706D 3” x 10” Double-Edge Multi-Purpose Blade

  • Hardened, high-carbon steel blade has two 10” long sharpened edges, providing double the blade life.
  • Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
  • Works on Crain No. 700 and No. 710 stripper machines.
  • Dimensions: 3” wide x 10” long x .079 thick. Sharp edge is ground to a 30° bevel on both sides.

No. 707 3” x 16” Cleaner Blade

  • Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
  • 3” width produces a stiffer blade for removing hard-setting adhesive residues.
  • Good for removing epoxy adhesives, thin-set mortar, or cement-based patch.
  • Dimensions: 3” tall x 16” wide x .079” thick. Sharp edge ground to 30° bevel on one side only.

No. 708 5” x 16” Cleaner Blade

  • Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
  • 5” width produces a blade with more flex for removing soft-setting adhesive residue.
  • Good for removing latex or urethane-based adhesives, or gypsum-based patch.
  • Dimensions: 5” wide x 16” long x .079” thick. Sharp edge ground to 30° bevel on one side only.

No. 710 Power Stripper

  • Power Channel construction produces forward stripping blade motion with more focused energy.
  • Cam action of the 1 HP motor is channeled straight ahead using steel channels and ball bearings.
  • Blade carrier forms ultra-low blade angle allowing the blade to get beneath the material to be removed.
  • Includes 5 1/2” x 3 1/8” x 1/4” Spud Blade for light tile and wood removal, 3” x 10” multi blade, and 35 lb. weight.

No. 711 Spud Blade

  • Heavy-duty extra-thick stripper blade for removal of ceramic tile or wood floors.
  • Narrow 3 1/8” ground edge takes up narrow sections as is often required on wood floor takeup.
  • Long 5 1/2” body provides reach to prevent the blade carrier from contacting surrounding material.
  • For use on the Crain No. 710 Power Stripper only. Dimensions: Length: 5 1/2" x Width: 3 1/8" x 1/4" thick.

No. 712 #12 Open End Thimble, Small

  • English size #12 (U.S.A. size #0) small open-end sewing thimble.
  • Works well on small-sized fingers.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the finger and exposes fingertip for gripping.

No. 713 #13 Open End Thimble, Medium

  • English size #13 (U.S.A. size #00) medium open-end sewing thimble.
  • Works well on medium-sized fingers.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the finger and exposes fingertip for gripping.

No. 714 #14 Open End Thimble, Large

  • English size #14 large open-end sewing thimble.
  • Works well on large-sized fingers.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the finger and exposes fingertip for gripping.

No. 715 #00 Open End Thimble, Thumb

  • Extra-large open-end sewing thimble.
  • Works well on the thumb.
  • Outer surface has coarse grate for pushing the needle point.
  • Open end helps it stay on the thumb and exposes the end of the thumb for gripping.

No. 718 Power Scraper

  • Light and highly maneuverable machine with ½ horsepower motor can take up heavy adhesive residue, vinyl or VCT.
  • Power channel construction forces the blade forward with more focused energy.
  • Collapses quickly for easy carrying. The all-steel frame and handle provides rigidity and durability.
  • Includes No. 701 4" x 6" Vinyl Blade, No. 705 3" x 10" Multi-Purpose Blade and narrow No. 719 3½" x 3¾" Thin Spud Blade for tough take ups.

No. 719 3 1/2″ x 3 3/4″ Thin Spud Blade

  • Hardened, high-carbon steel blade has a 3 1/2” sharpened edge.
  • Takes up a narrow section of material. Works well on tough take-up jobs because it reduces resistance.
  • Works on Crain No. 710 or No. 718 stripper machines.
  • Dimensions: 3 3/4" tall x 3 1/2" wide x .079" thick. Ground to a 30° bevel on one side only.

No. 720 Hinged Knife

  • Slim body hinges open for access to blade storage.
  • Takes slotted razor blades.
  • Body includes knurling on both sides for improved grip.
  • Fin behind the blade carrier for thumb pressure improves control.

No. 725 Deluxe Carpet Knife

  • Slotted razor blade carpet knife with rear-loading magazine for quick access to blades.
  • Loosen the folding thumbscrew to release the magazine.
  • Wide contours for more open, less constricted ergonomic grip.
  • Precision blade holder holds blades tight at varying blade extension when needed.

No. 726 Pivoting Carpet Knife

  • Slotted razor blade carpet knife pivots open for quick access to blades.
  • Loosen folding thumbscrew, and the knife pivots open.
  • Knife body features wide contours for more open, less constricted ergonomic grip.
  • Precision blade holder holds blades tight at varying blade extension when needed.

No. 727 Delphin Knife

  • Utility or hook blade knife with hinged body that opens rapidly using a double-lead thumbscrew.
  • Body can be opened by rolling the wheel across a surface for access to blade storage.
  • Contoured for enhanced grip with precision blade holder to hold blades tight.
  • Comes with plastic blade carrier that fits inside a pocket.

No. 728 Pocket Utility Knife

  • A utility blade knife that folds for storage in your pocket.
  • Durable blade holder locks rigidly.
  • When opened, body locks rigidly and reliably.
  • Body is contoured for gripping and includes a blade storage compartment.

No. 730 Utility Knife

  • Classic utility or hook blade knife with knurled body for solid grip.
  • Compact design and precision blade holder for detailed cutting in sheet vinyl materials.
  • Pivots open for blade storage using the folding thumbscrew.
  • Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook).

No. 732 Extra-Grip Utility Knife

  • More knurling up front plus finger contours for better grip and precise cutting.
  • Pivots open quickly for blade storage by loosening the folding thumbscrew.
  • Replacement blades are easily removed by a teeter-totter action generated by internal ridges.
  • Precision blade clamp with magnet takes hook or utility blades.

No. 733 Extra-Grip Razor Knife

  • Slim profile and heavy knurling on the body and up front provide better grip for precise cutting.
  • Precision blade clamp with magnet takes standard slotted razor blades (Crain No. 308C).
  • Extra blades are easily retrieved from storage in the body by loosening the folding thumbscrew and pivoting open.
  • Blades are easily removed by a teeter totter action generated by internal ridges.

No. 735 Carpet Pad Knife

  • Relieved blade holder exposes a longer cutting surface of the slotted razor blade.
  • Cuts thick carpet pad more efficiently.
  • Handle is angled upward to prevent dragging of the knuckles on the pad.
  • Body pivots open for blade storage by loosening the folding thumbscrew.

No. 745 Deluxe 750° Heat Gun w/Case

  • Flameless electric heat gun producing hot air up to 750°F for softening, forming and cutting sheet vinyl and VCT.
  • Adjustable intake cover adjusts temperature from 500°F - 750°F. Fan output is 27 CFM.
  • 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
  • Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.

No. 745K Deluxe Gun Universal Case

  • Carrying case only for Crain No. 745 and No. 995 Deluxe Heat Guns.
  • Also holds all previous Nos. 740 & 990 Crain Deluxe heat guns (red aluminum housing).
  • Custom formed interior supports and protects the heat gun in transportation and storage.
  • Made with dual latches, piano-style hinges, and recessed handle for durability.

No. 750 7500 Hammer Tacker 15/32″ Crown

  • Economical hammer tacker for stapling pad takes 7500 series pad staples, 15/32” crown x 3/8” leg.
  • Bottom-loading magazine makes loading staples or clearing jams easy.
  • All-steel driving mechanism is durable.
  • Thick rubber grip provides comfort and control.

No. 751 Thriftline Heat Blo Gun

  • Inexpensive 1200 watt heat gun produces adjustable hot air from 250° - 1000°F.
  • Temperature is adjustable by turning a large knob at the back of the gun.
  • Three-position switch controls the power and amount of air output at high, low or power off.
  • Pistol-grip handle is designed to stand the gun upright to prevent damaging the floor.

No. 760 Right-Handed Sewing Palm

  • Rawhide leather bound sewing palm includes sewn-on iron thimble.
  • Puts the force of the palm behind the needle to push through tough backings.
  • Sewn-on thimble includes coarse grate for directing the needle.
  • Designed for right-hand usage only.

No. 761 2 1/8″ Long Needles

  • 21/8 inch long, 16 gauge straight sewing needles.
  • Made especially for carpet seaming.
  • Rounded on the eyelet end, sharp on the other.
  • Sold in pack of 25 needles only.

No. 762 3″ Long Needles

  • 3 inch long, 16 gauge straight sewing needles.
  • Made especially for carpet seaming.
  • Rounded on the eyelet end, sharp on the other.
  • Sold in pack of 25 needles only.

No. 765 4″ Curved Needles

  • 4 inch, 17 gauge curved sewing needles.
  • Sometimes called “mattress needles”, but also good for sewing carpet.
  • Rounded on the eyelet end, sharp on the other.
  • Sold in pack of 12 needles only.

No. 769 Economy Polyester Thread

  • Three ply waxed 100% polyester hand stitching thread.
  • Color is natural (beige) similar to the color of carpet backing.
  • Wax coating passes smoothly through the material being sewn.
  • Stretches more than linen thread, which may show more seam when used for that purpose.

No. 771 Natural Waxed Linen Thread

  • Waxed three cord natural linen thread.
  • Wax coating helps thread pass smoothly through the carpet being sewn.
  • Color is natural (beige) similar to the color of the carpet’s backing.
  • Works well for hand sewing carpets including seams.

No. 777 Toe-Kick Saw

  • Extended spindle, low-profile head, and flush-mounted blade cuts up to inner wall of a toe-kick.
  • Hinged depth adjustment plate has five settings for common underlayment thicknesses including 1/4", 3/8", ½", 3/8" or ¾".
  • Comes with No. 787 3 3/8" Carbide-Tipped Blade for wood cutting. No. 789 Toe-Kick Saw Diamond Blade sold separately for cutting out tile or grout.
  • Clutch mechanism that may disengage to reduce kickback.

No. 780 Aluminum Drives

  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 1/8” hole.
  • Fastener dim.: 1/8” dia. X 7/8” long. Hole: 1/8” dia. x 1” deep.

No. 783 Aluminum Drives

  • Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
  • Oval head seats in metal moldings with countersunk holes.
  • Semi-square body compresses against pre-drilled 3/16” hole.
  • Fastener dim.: 3/16” dia. X 7/8” long. Hole: 3/16” dia. x 1” deep.

No. 787 Carbide-Tipped Blade

  • Replacement carbide-tipped blade for Crain Model No. 775, 785 or No. 795 Toe-Kick Saws.
  • 3 3/8” diameter with 18 carbide teeth and precision countersunk arbor to flush mount blade screw.
  • Cuts to fixed depth of 3/4” using the saw.
  • For cutting wood only. Do not use on any metal, ceramic tile, brick, or stone materials.

No. 788 2 3/4″ Toe-Kick Saw Blade

  • 2 3/4” diameter carbide-tipped blade for use on Crain No. 785 and No. 795 Toe-Kick Saws only.
  • When used on these saws, it cuts to a shallower fixed depth of 3/8”. For cutting wood only.
  • 16 carbide teeth, countersunk arbor for flush mounting the blade screw, and two drive holes.
  • Not for use on Model No. 775 Toe-Kick Saw. Don’t use on metal, ceramic tile, concrete or stone.

No. 789 2 5/8″ Toe-Kick Diamond Blade

  • Accessory diamond blade for use on Crain Model No. 775, No. 785, or No. 795 Toe-Kick Saws.
  • 2 5/8” diameter continuous rim diamond dry cutting blade for cutting ceramic tile or removing grout.
  • Cuts to fixed depth of 3/8” using the saw.
  • For use on ceramic tile, brick, concrete, stone, or removing grout only. Not for use on metals.

No. 803 Combination Blade

  • Economical steel-toothed blade for discontinued Crain Model Nos. 800 and 810 Super Saws.
  • Includes 100 steel teeth.
  • Arbor hole countersunk for flush mounting blade screw. Body has 2 drive holes for blade driver.
  • For use on wood or dry wall only. Do not use on any metal, ceramic tile, concrete or stone.

No. 804 Carbide Blade

  • Carbide-tipped blade for use on discontinued Model Nos. 800 and 810 Super Saws.
  • Blade has 40 carbide teeth for a smooth cut and long blade life. For use on wood or dry wall only.
  • Arbor hole countersunk for flush mounting blade screw. Body has two holes for blade driver.
  • For cutting wood or dry wall only. Do not use on any metal, ceramic tile, concrete, or stone.

No. 805 Masonry Blade

  • Replacement 6 ½” diameter masonry blade for Crain No. 800, 810, 812, 820 and 825 undercut saws.
  • Dry cutting composition blade for undercutting masonry walls or hearths.
  • Produces seven to ten feet of undercutting depending on material and depth of cut.
  • For use in undercutting masonry materials only. Not for use on any kind of metal.

No. 821 Carbide-Tipped Blade

  • Carbide-tipped replacement blade for Crain No. 812 Super Saw or No. 825 Heavy-Duty Undercut Saw.
  • Large 6 ½” diameter blade can fully undercut inside corner areas.
  • 40 carbide teeth and precision-formed steel body produces smooth, accurate cuts.
  • Not for use on any metal, masonry, stone, or ceramic tile materials.

No. 822 Diamond Undercut Blade

  • Accessory 6 ½” diamond blade for the Crain No. 812, No. 820, or No. 825 undercut saws.
  • Dry-cutting segmented abrasive cutting diamond blade.
  • Provides superior blade life cutting masonry, ceramic tile, or stone.
  • Not for use on any metal or wood materials.

No. 835 Heavy-Duty Undercut Saw

  • Undercuts doors in place, inside corners, and masonry walls and hearths. Vacuum fitting for dust collection.
  • Diamond blade available as accessory for undercutting tile and stone walls (No. 822).
  • Dual lead screws provide slip proof height adjustment. Aluminum ratchet handle is highly durable.
  • Comes with carbide tipped blade (No. 836), masonry blade (No. 805) and carrying case.

No. 836 Carbide-Tipped Blade

  • Carbide-tipped replacement blade for the No. 835 Heavy-Duty Undercut Saw.
  • Large 6 ½” diameter blade can fully undercut inside corner areas.
  • 40 carbide teeth produce smooth, accurate cuts.
  • Not for use on any metal, masonry, stone, or ceramic tile materials.

No. 837 Dust Cover for 825 & 835 Saws

  • Bolts onto Crain No. 825 and No. 835 Heavy-Duty Undercut Saws to capture more sawdust and channel towards vacuum port.
  • Spring-loaded shroud adjusts automatically to the height of cut and follows the floor contour.
  • Also includes a pivoting depth gauge to control the depth of cut.
  • Dust cover must be removed to cut inside corners. Do not use the saw without dust cover or depth gauge in place.

No. 844 Pulling Claw

  • The pulling claw features a compound leverage jaw and large contoured handle.
  • Works great for pulling up glued-down flooring materials. Withstands heavy hand pulling.
  • Spring-loaded jaw opens automatically to insert an edge of the material. Just insert material and pull.
  • The harder you pull, the harder the roller activated upper jaw clamps on the material.

No. 845 Metal Mitre Handle Only

  • Handle assembly only for family of Metal Mitre interchangeable die sets used to make corners in cap metal.
  • Compound leverage handle generates enough force to punch notched shapes out of aluminum cap.
  • Die sets fasten onto the cast iron die holder with two fasteners. No die set is included.
  • Accepts these die sets: No. 846, No. 848, No. 850, or as replacement handle for No. 870 Vinyl Notcher.

No. 846 .135″ Punch Die Set Only

  • Interchangeable Metal Mitre die set only with thick .135” punch for heavier carpet or wall board cap.
  • Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
  • NOTE: this punch is too thick to enter the narrow channels of laminate and vinyl cap metal.
  • For use on aluminum cap metal only. Repl. punch: 1846-A. No handle is included with this die set.

No. 847 .135″ Punch Die Set and Handle

  • Combo including a handle and die set with thick .135” punch for heavy carpet or wall board cap.
  • Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
  • Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
  • NOTE: punch for this combo is too thick to enter the narrow channels of laminate and vinyl cap metal.

No. 848 .090″ Punch Die Set Only

  • Interchangeable die set only with .090” thick punch for most vinyl and carpet cap with at least 3/32” opening.
  • Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
  • Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
  • For use on aluminum cap metal only. Repl. punch: 1848-A. No handle is included with this die set.

No. 849 .090″ Punch Die Set and Handle

  • Combo including a handle and die set with relieved .090” thick punch for most vinyl and carpet cap.
  • Works on cap metals with at least 3/32” opening. For use on aluminum cap metals only.
  • Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
  • Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.

No. 850 .050″ Punch Die Set Only

  • Interchangeable die set only with .050” thick punch for vinyl and laminate cap with at least 1/16” opening.
  • Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
  • Slender punch for narrow channels. Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
  • For use on aluminum cap metal only. Repl. punch: 1850-A. No handle is included with this die set.

No. 851 .050″ Punch Die Set and Handle

  • Combo including a handle and die set with slender .050” thick punch for most vinyl and laminate cap.
  • Slender punch works on cap metals with at least 1/16” opening. For use on aluminum cap only.
  • Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
  • Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.

No. 855 Wood Miter

  • Makes fast angle cuts in quarter round, eliminating need for a chop saw.
  • Stout 2 ½” long high carbon steel blade is strong enough and sharp enough to shear cut wood.
  • Table includes gauge for making 22.5° angle cuts for "soft corners" and 45° angle for square corners.
  • Extra-long vinyl coated handles provide adequate leverage for cutting.

No. 856 Wood Mitre Replacement Blade

  • One each replacement blade for No. 855 Wood Miter that makes angle cuts in wood quarter round.
  • Stout 2 ½” long blade.
  • Sharp enough and strong enough to shear cut wood materials cleanly.
  • Blade is made from high carbon steel for long life.

No. 870 .156″ Punch Vinyl Notcher

  • Specialty combo handle and die set with heavy .156” thick punch for use on vinyl T-moldings only.
  • Quickly cuts out a relief notch from the insert of the T-molding with 1/4” bottom and 45° side angles.
  • After relief notch is removed, the T-molding easily forms tight radius bends, such as for corners.
  • Sold as combo handle and die set only. Die Set for No. 870 is not sold separately.

No. 880 Vinyl Mitre

  • Makes clean, ultra-straight cuts in vinyl trims much faster than with a knife.
  • Cut pieces come together perfectly to form more attractive corners.
  • Tool includes a gauge for cutting the trim at a 45° angle to form a corner, or straight for butt cuts.
  • Razor sharp blade is replaceable (No. 881).

No. 881 Replacement Blades (3)

  • Pack of 3 replacement blades for the No. 880 Vinyl Mitre.
  • Blades create 45° cuts in vinyl trims for more attractive corners.
  • Razor-sharp edges make clean, accurate cuts in the trim so that cut pieces come together perfectly.
  • Comes in a plastic box that snaps closed for storage.

No. 898 Iron Combo Case Only

  • All-steel case for carrying and protection 3 or 6 inch irons.
  • Inner partition for a roll of tape and space to loosely lay the iron cord.
  • Case top is connected by piano-style hinge, and includes plated steel folding handle.
  • Includes heavy-duty latch with lockable hasp.

No. 903 3″ Universal Iron Tray

  • Holds Crain 3 inch irons.
  • Holds other popular 3 inch irons.
  • Spring clips are riveted to the tray for durability.
  • Durable all-steel construction with angled clips for hands-free reinsertion of the iron.

No. 905 Heat Bond Iron

  • Ultra-low profile and narrow handle make it easier to bring the seam together.
  • Dual indicator lights show power-on and heating status.
  • Rotating 12’ HSJO cord assembly with flexible strain relief improves cord life.
  • Base includes non-stick coating. Includes durable riveted iron tray.

No. 906 Heat Bond Iron Kit

  • Includes No. 905 iron, 25 foot extension cord, and steel case.
  • Case holds the iron plus a spare roll of seam tape.
  • Case is made with a durable, smooth-acting piano-style hinge.
  • Case is made with a plated steel handle and lockable hasp for security.

No. 910 Sharpening Stone

  • Works well for resharpening curved carpet and vinyl knives.
  • Medium Crystolon silicon carbide grit.
  • Sized 1 1/4" wide by 10" long x 3/4" thick.
  • No handle is included with this stone.

No. 912 12” x 8” Steel Square

  • An 8” x 12” steel square that’s useful for patterned vinyl flooring layout work.
  • Legs include rulers on front and back marked in 1/16” graduations.
  • Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
  • Dimensions - body: 12" long x 1 1/2" wide, tongue: 8" long x 1" wide.

No. 915 24” x 16” Steel Square

  • 24” x 16” steel square that’s useful for patterned vinyl flooring layout work.
  • Legs include rulers on front and back marked in 1/8” graduations.
  • Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
  • Dimensions - body: 24" long x 2" wide, tongue: 16" long x 1 1/2".

No. 930 Laminated Sharpening Stone

  • Works well for resharpening curved carpet and vinyl knives with resharpenable blades.
  • Made from Crystolon silicon carbide.
  • Grit is coarse on one side, fine on the other.
  • Stone size: 1 1/4" wide by 10" long x 3/4" thick. Handle length: 4 3/4" long. Handle diameter: 1 1/8" dia.

No. 950 Professional Installers Tool Kit

  • Provides basic tools of carpet installation, including:
  • 24” tool box, knee kicker, wall trimmer, cushion back cutter
  • strip cutter, tool pouch, chalk line & chalk, seam sealer bottle
  • razor & utility knives, molding lifter, hammer, stair tool, and nap shears.

No. 955 Pull Hand Groover

  • Cuts a U-shaped groove at the seam line for welding using a pulling action.
  • Makes starter grooves for a power groover. Grooves in tight areas and places floors aren’t level.
  • Adjustable fin tracks in the seam line and controls grooving depth, permitting faster work.
  • Comes with 3 blades, one pre-loaded in the tool, and two stored in the handle.

No. 956 Pull Hand Groover Blades (3)

  • Pack of three U-shaped replacement blades for the Crain No. 955 Pull Hand Groover.
  • Precision formed from high carbon steel, heat treated, and hand sharpened.
  • Locator hole above screw hole keeps blade rigidly in place on Crain No. 955 groover.
  • Standard shape fits other popular hand groovers.

No. 961 Triangular Welding Tip

  • Triangular speed welding tip for the Crain No. 960 Heat Weld Gun.
  • For use with triangular or “half moon” welding rod.
  • Air outlet is precisely formed to focus hot air over the seam area.
  • Standard sized inlet diameter fits the pencil tip nozzle outlet of popular heat weld guns.

No. 962 Round Welding Tip

  • Round speed welding tip for the Crain No. 960 Heat Weld Gun.
  • For use with round 4 mm welding rod.
  • Air outlet is precisely formed to focus hot air over the seam area.
  • Standard sized inlet diameter fits the pencil tip nozzle outlet of most other popular heat weld guns.

No. 963 Pencil-Tip Nozzle

  • Adapts our No. 960 Heat Weld Gun to our No. 961 Triangular or No. 962 Round Welding Tips.
  • Angled outlet is convenient for holding the heat gun and keeping the speed tip on the rod.
  • Useful in areas where speed tips can’t go such as coved areas.
  • Standard diameter inlet and outlet outlet fits most popular heat weld guns and speed tips.

No. 965 Skiving Knife w/Blade

  • Trims excess heat welding rod at the seam without gouging high spots.
  • Includes sharp, flexible blade that is replaceable and built-in pivoting trim guide.
  • On first pass, trim with guide under the blade, then pivot guide out and trim second pass.
  • Eliminates difficult resharpening of quarter moon knives and gouging high spots.

No. 966 Skiving Knife Repl. Blade

  • One each replacement blade for the No. 965 Skiving Knife.
  • Blade is flexible to eliminate gouging of high spots.
  • Blade is replaceable to eliminate difficult resharpening of quarter moon knives.
  • Used for trimming excess heat welding rod at the seam areas.

No. 967 Skiving Knife Repl. Blades (5)

  • Pack of five replacement blades for the No. 965 Skiving Knife.
  • Blades are flexible to eliminate gouging of high spots.
  • Blades are replaceable to eliminate difficult resharpening of quarter moon knives.
  • Used for trimming excess heat welding rod at the seam areas.

No. 968 Floor Following Groover

  • Cuts a groove of consistent depth for heat welding solid vinyl flooring.
  • Maintains consistent grooving depth when floors aren’t level up to 1/4" variation over 1 foot of seamline.
  • Spring-loaded floor following dust shroud improves dust control.
  • Includes 12 tooth 130mm carbide-tipped blade (No. 971) and case. Diamond grit blade sold separately (No. 972).

No. 969 Heat Weld Gun

  • Comes with a Leister Triac ST heat gun for consistent and reliable heat output.
  • A single dial on the back of the heat gun controls temperature from 104° - 1290°F.
  • Standard 1 1/4” air outlet fits a wide variety of nozzles.
  • Comes with pencil tip nozzle, triangular welding tip, round welding tip, and carrying case.

No. 971 12 Tooth Carbide Blade

  • Replacement carbide tipped blade for the Crain No. 970 Power Groover.
  • 12 tooth 130 mm blade works on other groovers that take this size blade.
  • Cuts a trapezoidal shaped groove in the material. Blade is resharpenable.
  • Not for use on metal impregnated safety floors (see No. 972 Diamond Groover Blade).

No. 972 Diamond Groover Blade

  • Heavy grit diamond abrasive blade for the Crain No. 970 Power Groover.
  • Use on metal impregnated safety floors only. Makes an approx. 3.4 mm wide groove.
  • Continuous rim diamond grit brazed on the entire outside diameter.
  • 130 mm diameter works on other groovers that take this sized blade.

No. 979 Universal Welding Tip

  • Versatile tip works with 3 mm round, 5 mm round, half-moon, or triangular welding rod.
  • Adjusting screw at the rod inlet adapts the inlet to the various rod shapes.
  • Grooved brass pressure roller is also adaptable to the various rod shapes.
  • Hot air inlet is sized to fit the Crain No. 960 or No. 980 Heat Weld Guns, and other popular models.

No. 985 Quarter Moon Knife

  • Trims excess welding rod from the seam area after cooling making it flush with the floor.
  • Used in a two-step trimming process with the No. 986 Trim Guide.
  • Use the trim guide under the blade on first pass, then remove the trim guide on second pass.
  • Knife is resharpenable and comes with protective pouch.

No. 986 Trim Guide

  • Depth control guide for the No. 985 Quarter Moon Knife.
  • Used with the knife to trim excess welding rod in a two-step process.
  • Insert guide under the knife to remove the bulk of the material on a first pass.
  • Remove guide on second pass and the knife trims the remaining excess flush to surrounding floor.

No. 987 Pressure Roller

  • Used for welding areas where a speed tip does not work well such coved areas.
  • Welding rod is threaded through the hollow handle and put under the roller.
  • Roller has a grove for guiding and pressure the welding rod into the seam.
  • As the roller presses and holds the rod, a heat gun with pencil-tip nozzle welds it.

No. 988 Vinyl Welding Kit

  • A kit of the basic tools needed for vinyl welding at a great price!
  • Includes: Leister Triac ST heat gun, pencil tip nozzle, triangular tip and round tip.
  • Also includes: power groover, pull hand groover, skiving knife, selvage trimmer, recess scriber, hook handle utility knife, and cleaning brushes.
  • Includes metal carrying case that holds all the tools.

No. 995 Deluxe 1000° Heat Gun w/Case

  • Flameless electric heat gun producing hot air up to 1000°F for softening, forming and cutting sheet vinyl and VCT.
  • Adjustable intake cover adjusts temperature from 750°F - 1000°F. Fan output is 27 CFM.
  • 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
  • Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.

No. 996X Hook Blades (15)

  • Pack of 15 high-quality German-made hook blades. Hook shape good for cutting over concrete.
  • Very good for following score lines on linoleum and making long rough cuts in sheet vinyl.
  • The blades come in a plastic box with a hinged lid that snaps closed for storage.
  • Usable with most utility knives and Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.

No. 997 Personna® Deep Hook Blades (10)

  • Pack of 10 Personna® deep hook blades. These blades can be used in most utility knives.
  • Hook blades keep the cutting edge off the floor when cutting concrete.
  • Hook blades also good for following score lines in linoleum and making long rough cuts in sheet vinyl.
  • Blade dim.: length: 2.0", width: .75", thickness: .025". Use in Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.