No. 203 Glue Gun
- 80 watt UL listed glue gun.
- Comes with Crain No. 629 1/8” Nozzle with small diameter extension tube.
- 1/8” nozzle is helpful for precision carpet seam edge sealing.
- Also comes with standard nozzle. Works with standard 7/16” diameter glue sticks.
|
No. 204 Edge Sealing Glue Gun
- 100 watt glue gun with a carpet edge sealing tip (No. 627) and conventional 1/8” nozzle (No. 629).
- Carpet edge sealing tip works at an upright handle that allows a convenient pulling motion.
- Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
- During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
|
No. 206 Leather Knee Pads
- Ultra-thick padding for greater kneeling comfort.
- Tough leather wear surface minimizes build-up of sharp objects that can scratch floors.
- Padding is riveted to the leather.
- Durable wide straps with steel buckles.
|
No. 207 High Temp. Glue Gun 220W
- High powered 220W gun quickly melts glue sticks for high output applications.
- Use for gluing tack strip and other accessory trims to concrete with acrylic glue sticks.
- Gun has variable temperature control from 284°F - 428°F and comes with carrying case.
- Takes standard 7/16" diameter glue sticks (Crain No. 201 10" regular, No. 202 4" regular, or No. 208 10" acrylic).
|
No. 208 Acrylic 10" Glue Sticks (19 pack)
- Quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors.
- A fast alternative to aluminum drives or contact cement, they set up after 60 – 80 seconds.
- Includes 19 each 10” long sticks (1 lb. of adhesive) in a self-closing bag for storage.
- Sticks are standard 7/16” diameter for use in a wide variety of glue guns.
|
No. 209 Extra Open Time Glue Sticks
- Provides more time to position materials (approx. 3 minutes).
- Helpful to position starter boards in hardwood installation.
- Helpful to position long trim pieces.
- 10” long sticks, standard 7/16" diameter. Comes 20 sticks (1 lb.) per resealable bag.
|
No. 217 Hook Handle Razor Knife
- Slotted razor blade carpet knife with multiple added contours for improved grip.
- Wide contoured mid-section transitions to a narrow rear hook in proportion to palm and fingers.
- Rear hook gives the little finger improved advantage for greater pulling power.
- Body pivots open by loosening the folding thumbscrew for fast access to blades.
|
No. 223 1/8" Solid Carbide Drill, Ea.
- 1/8” solid carbide drill bit with two usable ends.
- Makes a 1/8” hole in concrete for fastening aluminum drives.
- Requires Crain No. 225 1/8” Hexagon Adaptor for the drill chuck.
- Drill RPM must be maintained between 1700 to 3500 RPM.
|
No. 224 3/16" Solid Carbide Drill, Ea.
- 3/16” solid carbide drill bit with two usable ends.
- Makes a 3/16” hole in concrete for fastening aluminum drives.
- Requires Crain No. 226 3/16” Hexagon Adaptor for the drill chuck.
- Drill RPM must be maintained between 1700 to 3500 RPM.
|
No. 225 1/8" Hexagon Adaptor
- Adapts 1/8” solid carbide drill bits to a standard electric drill chuck.
- Works with Crain No. 223 1/8” Solid Carbide Drill Bits.
- Shank diameter is 1/4”.
- Internal collet tightens down on the drill bit to hold it in the adaptor.
|
No. 226 3/16" Hexagon Adaptor
- Adapts 3/16” solid carbide drill bits to a standard electric drill chuck.
- Works with Crain No. 224 3/16” Solid Carbide Drill Bits.
- Shank diameter is 1/4”.
- Internal collet tightens down on the drill bit to hold it in the adaptor.
|
No. 230 Deluxe Floor Scraper
- Heavy-duty scraper with 66” long solid steel body.
- Provides the weight needed to force through and scrape up glued-down flooring materials.
- Beveled blade carrier deflects material build-up. Case hardened to reduce bending.
- Includes replaceable 2” wide high carbon steel blade that holds an edge and withstands impact.
|
No. 231 Replacement Blade
- Heavy-duty two inch wide blade for use in the No. 230 Deluxe Floor Scraper.
- Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
- Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
- Includes one each blade only.
|
No. 232 3" Replacement Blade
- Wider three inch blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material.
- Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
- Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
- Includes one each blade only.
|
No. 235 6" Disposable Cove Base Nozzle
- Inexpensive, 6” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
- Evenly spreads 5 beads of adhesive for optimal application onto 6” wide cove base.
- 5 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
- End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
|
No. 236 3" Disposable Cove Base Nozzle
- Inexpensive, 3” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
- Evenly spreads three beads of adhesive for optimal application onto 3” wide cove base.
- 3 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
- End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
|
No. 237 Quart Cove Base Gun
- Uses standard quart cove base adhesive cartridges.
- Smooth pushrod delivers continuous feed and pressure. Releases using easy-access thumb lever.
- Handy cartridge tip cutter is built in to the handle.
- Riveted 5 ½” seal puncture needle pivots out from the body to break the cartridge seal.
|
No. 238 1/10 Gallon Cove Base Gun
- Uses standard 1/10 gallon cove base adhesive cartridges.
- Smooth pushrod delivers continuous feed and pressure.
- Rod pressure is released for reloading or for stopping the flow using easy-access thumb lever.
- Durable and economical all-steel construction.
|
No. 245 Deluxe Carpet Trimmer
- Trims excess carpet at the wall leaving right amount for tucking.
- Deluxe trimmer has top-loading blade carriers for fast blade changes.
- Wide throat area results in smooth flow of carpet to the blades.
- Six shims for height adjustment and four throat adjustments for various carpets.
|
No. 246 Carpet Trimmer
- Trims excess carpet at the wall, leaving just the right amount for tucking.
- To change blades, remove the blade carrier.
- Blades are easily accessible from the top of the blade carrier.
- Shims are relieved for easy reinsertion of the blade carrier, and each has four sockets for throat adjustment.
|
No. 247 Multi-Purpose Wall Trimmer
- Rounded wall runner for trimming vinyl sheet goods or cut pile carpets.
- Anti-friction boot prevents scratching when used to trim vinyl.
- Spring-loaded center knob for blade height adjustment.
- Takes slotted razor blades for trimming vinyl, or hook blades for trimming carpet.
|
No. 250 Troxell Soft R Knee Pads
- Troxell Super-Soft knee pads size regular/medium in royal blue color.
- Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
|
No. 251 Troxell Soft L Knee Pads
- Troxell Super-Soft knee pads size large in royal blue color.
- Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
|
No. 252 Troxell XL Leather Knee Pads
- Troxell “Leather Head” knee pads, size: large.
- Durable neoprene construction with leather cover. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
|
No. 265 Stand-Up Cutter
- Slices glued-down carpet into strips for faster removal, and great for rough cutting carpet off roll.
- Comes with sharp, hardened steel point with precision slot to guide utility blade.
- Point punctures glued-down carpet for fast starts. As pushed it rides on subfloor, lifting carpet to the blade.
- Heavy-duty fiberglass handle adjusts from 50” – 85” for optimal angle. Takes hook or utility blades.
|
No. 266 Replacement Point
- Sharp, hardened replacement point for the No. 265 Stand-Up Cutter with precision slot for utility blade.
- Quickly punctures glued-down carpet for fast starts.
- As the point is pushed, it rides on the subfloor and lifts carpet to the blade where it is cut.
- Includes one each replacement point only. No blades are included.
|
No. 270 Outside Silver Corner (Each)
- Silver metal corners for covering a sheet vinyl outside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 271 Inside Silver Corner (Each)
- Silver metal corners for covering a sheet vinyl inside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 272 Outside Gold Corner (Each)
- Gold metal corners for covering a sheet vinyl outside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 273 Inside Gold Corner (Each)
- Gold metal corners for covering a sheet vinyl inside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 280 H.D. Air Lifter
- Moves appliances up to 800 lbs. using high pressure air jets, reducing risk of floor damage and injuries.
- Slide the load plates under the load, turn on the blower, and air plates inflate to lift the load.
- Air jets create an air cushion to glide the load over hard surfaces. Includes pads for carpet.
- Includes 2 load plates, 2 HP. motor, shoulder strap, T-connector and hoses, carpet pads and carrying bags.
|
No. 285 Personna LVT/LVP Knife
- 45° blade angle of this knife is optimal for scoring and breaking rigid core LVP/LVT.
- Elevated handle provides knuckle clearance.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Extra blades can be stored in the handle. Comes with 10 blades. Blades: No. 286C or No. 287.
|
No. 286C Personna LVP/LVT Blades (100)
- Specialty blades for No. 285 Personna LVT/LVP Knife.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
- Pack of 100 blades, incl. 10 "pocket packs" of 10 blades each. Blade dimensions: length: 1.625", width: .75", thickness: .025".
|
No. 287 Personna LVP/LVT Blades (10)
- Specialty blades for No. 285 Personna LVT/LVP Knife.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
- Blister card includes 10 blades. Blade dimensions: length: 1.625", width: .75", thickness: .025".
|
No. 290 Seam Cutter Plus
- Excels on carpets with zig-zag tufting including commercial loop pile and Berber carpets.
- Blade runs directly behind row guide, keeping it away from hydra-shift stopovers.
- Reduces shearing of yarns to produce better looking seams.
- Also works as a Z-bar or a vinyl molding trimmer.
|
No. 292C H.D. Utility Blades Disp. Pack (100)
- Plastic dispenser pack of 100 heavy-duty utility blades with sliding tab to dispense one blade at a time.
- These blades can be used in most standard utility knives that take heavy-duty utility blades.
- Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
- Blade dimensions: length: 2.40", width: .75", thickness: .025".
|
No. 295C Heavy-Duty Utility Blades (100)
- Pack of 100 Personna® heavy-duty utility blades which are individually wrapped in paper and packaged in a laminated paper box.
- These blades can be used in most standard utility knives that take heavy-duty utility blades.
- Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
- Blade dimensions: length: 2.40", width: .75", thickness: .025". Individually wrapped blades packaged in laminated paper box.
|
No. 296 Vaughan Half Hatchet
- A multi-purpose tool for cutting and hammering down tackless strip.
- Polished head includes 3 ½” blade and hammering head.
- Hickory hardwood handle is contoured for gripping.
- Durable Vaughan quality product made in the USA!
|
No. 299Y Top Cutter Repl. Blades (10)
- Pack of 10 blades for the discontinued Crain No. 298 Top Cutter.
- When used with the Top Cutter, this elongated blade can double cut carpet from the face.
- For use with the Crain No. 298 Top Cutter only.
- Blade dimensions: length: 3.00", width: .745", thickness: .025".
|
No. 300 Loop Pile Cutter
- Great for rough cutting of carpet off the roll.
- Versatile design takes slotted razor, utility, or Crain No. 300Y blades.
- With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarns.
- Large thumb knob permits simple, fast blade changes.
|
No. 300Y Loop Pile Cutter Repl. Blades (10)
- Pack of 10 replacement blades for the Crain No. 300 Loop Pile Cutter. Packaged in a plastic box with hinged lid that snaps shut.
- Blades have 2 holes for a blade screw on early models of the No. 300 (black plastic body), but also work in later models.
- When used in the No. 300, they cut the carpet from the backing, reducing the shearing of yarns and wadding up of carpet.
- Blades are reversible for added life. Blade dimensions: length: 2.31", width: .75", thickness: .025".
|
No. 301 Cushion Back Cutter
- Precision blade pockets on left and right side hold slotted blades without screws.
- Trims seam edges close to the carpet’s tufting to produce better seams.
- 30° blade angle cuts cushion-back carpets cleanly.
- Beveled front guide follows the carpet’s rows. Soft grip handle provides comfort and control.
|
No. 302 Cushion Lock Cutter
- Offset blade clamp allows fast blade depth adjustment and blade changes. Takes standard slotted razor blades.
- Front guide has rounded notches to help find rows in difficult carpet including Berbers, hydrashift and commercial level loop.
- 30° blade angle cleanly trims the carpet's edges for seaming.
- Soft grip handle provides control and comfort.
|
No. 303 Loop Pile Cutter
- Includes base for cutting over pad or other carpet that protects material underneath.
- Blade carrier is adjustable in height so that it locks down on the rows of carpet.
- Dual blade pockets on left and right sides, and large thumb knob to lock in the blades.
- “Triple tight” 3 thumb knob construction helps produce accurate cuts.
|
No. 304 Versa-Cutter
- Versatile and durable carpet cutter with steel row guide for improved accuracy.
- Takes slotted razor, utility, or Crain No. 300Y blades. Dual springs hold the carpet down.
- With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarn.
- Steel foot plate reduces wear for long-term durability.
|
No. 306C Regular-Duty Slotted Razor Blades
- Pack of 100 Personna® regular-duty (.015" thick) round-edge slotted razor blades.
- Reduced thickness fits older model Crain tools that take thinner blades (Crain No. 124, 301, 302).
- Not recommended for newer Crain tools designed for heavy-duty slotted blades (Nos. 308C/309C - .017” thick).
- Blades individually wrapped and come in a laminated paper box. Blade dim.: length: 2.25", width: .75", thick: .015".
|
No. 308C Heavy-Duty Round Edge Slotted Razor Blades
- Pack of 100 Personna® heavy-duty (.017 thick) round edge slotted razor blades.
- Rounded corners of round edge blades ride on the subfloor without digging in and increasing resistance.
- Blades are individually wrapped in paper and are packed in a laminated paper box.
- Blade dimensions: length: 2.25", width: .75", thickness: .017".
|
No. 309C Heavy-Duty Square Edge Slotted Razor Blades
- Pack of 100 Personna® heavy-duty (.017 thick) square edge slotted razor blades which are individually wrapped in paper.
- Square edge blades provide a sharp, precise point for starting a cut with the knife.
- Square edge blades cut to full depth when used in seam cutters such as Crain No. 301 or No. 302.
- Blades are packed in a laminated paper box. Blade dimensions: length: 2.25", width: .75", thickness: .017".
|
No. 310 Dividers
- Double-needle dividers with rounded radius arm and large wing nut.
- Legs span from ½” to 6” apart. Needles press fit into the legs.
- Rounded arm provides smooth adjustment and solid hold.
- Comes with two needles in the tool and two replacement needles.
|
No. 311 Divider Repl. Pins (2)
- Pack of two replacement needles for The No. 310 Dividers.
- Approximately 7/8” long and 0.060” in diameter.
- Each needle has a sharp point for scribing.
- These needles press fit into either leg of the No. 310 Dividers.
|
No. 320 Vinyl Wall Trimmer
- Accurately trims sheetgoods net to the wall.
- Adjustable front guide holds the material in position against the wall.
- Adjustable rear guide keeps the trimmer running parallel with the wall for smooth trimming.
- Low profile hand contours help to keep the tool flat against the floor in use. Repl. blades: No. 321.
|
No. 321 Vinyl Wall Trimmer Blades (3)
- Pack of three hook blades for the No. 321 Vinyl Wall Trimmer.
- Reversible blade includes two cutting hook edges.
- Blades come in a plastic box with hinged lid for storage.
- Blade dimensions: length: 2.30", width: .50", thickness: .025".
|
No. 330 Push-Button Carpet Knife
- Pivots open by pressing the spring-loaded rear button to access the slotted razor blades.
- Contoured red handle includes knurling on both sides for improved grip.
- Large radiused fin behind the blade carrier for thumb pressure and improved control.
- This carpet knife takes slotted razor blades.
|
No. 332 Economy Hammer
- 20 oz. claw hammer for hammering down and pulling up tack strip.
- Forged, induction hardened steel head includes magnetic nail holder.
- Durable fiberglass handle is jacketed for overstrike protection.
- Handle includes contoured grip. Fully featured and excellent value.
|
No. 333 Extension Wall Roller
- Hand roller for vinyl with three rubber rollers.
- Rollers produce good pressure without scratching or scuffing.
- Rolls a 7 ½” section each pass. Recessed axle works close to walls without scratching.
- Twist-lock tube assembly adjusts handle length from 17” to 27”.
|
No. 334 6' Professional Straight Edge
- Six foot straight edge for making seams in sheet vinyl and like materials.
- Precision edges are ground for straightness with accuracy of +/-.003”.
- Made from special spring steel that will return to its flat condition even after being bent.
- One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 6' x 3" x 1/8".
|
No. 334S 4' Professional Straight Edge
- Four foot straight edge for making seams in sheet vinyl and like materials.
- Precision edges are ground for straightness with accuracy of +/-.003”.
- Made from special spring steel that will return to its flat condition even after being bent.
- One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 4' x 3" x 1/8".
|
No. 335 Undercut Saw Blade
- Replacement blade for the No. 336 Undercut Saw for hand undercutting of wood door jambs.
- Blade includes studs for mounting to the bracket of the No. 336 Undercut Saw.
- Trapezoidal shape provides clearance.
- Includes 12” row of 10 point teeth on both sides. Made from high carbon steel for good blade life.
|
No. 336 Undercut Saw
- Hand undercutting saw with heavy-duty wood handle, steel bracket, and replaceable 12” blade.
- Trapezoidal high carbon steel blade includes a row of 10 point teeth on both sides.
- Saw includes a front knob for working with both hands to increase cutting power.
- Good for cutting wood door jambs by hand. Replacement blade: No. 335.
|
No. 337 Duster Brush
- 8” duster brush made with durable blended horsehair bristles.
- Tends not to scratch on most floors.
- Wooden handle is very tough and impact-resistant.
- Bristle area: 8” long x 2 ½” wide. Handle length: 5”. Great for use with dust pan (Crain No. 666).
|
No. 339 Flex Undercut Repl. Blade
- One replacement blade for the Crain No. 338 Flex Undercut Saw.
- Flexible blade bends at the floor for hand undercutting wood door jambs.
- Both sides of blade have a 9 inch double row of staggered, ultra-fine induction hardened teeth.
- Blade provides easier starts, fast cutting, and smooth results.
|
No. 340 Selvage Trimmer
- Trims the factory selvage, so the sheet can be accurately scribed and seamed.
- Insert the selvage edge in the guidance slot, and the blade is properly positioned.
- Simply pull the tool through the material and the selvage is removed.
- Replaceable U-shaped blade makes a clean, square cut.
|
No. 341 Selvage Trimmer Repl. Blade (1)
- One each replacement blade for the No. 340 Selvage Trimmer.
- Trims the factory selvage so the sheet can be accurately scribed and seamed.
- U-shaped blade ensures a smooth, accurate cut.
- Trimmed edge will be perpendicular to the floor to match an adjacent edge.
|
No. 342 Selvage Trimmer Repl. Blades (3)
- One each replacement blade for the No. 340 Selvage Trimmer.
- Trims the factory selvage so the sheet can be accurately scribed and seamed.
- U-shaped blade ensures a smooth, accurate cut.
- Trimmed edge will be perpendicular to the floor to match an adjacent edge.
|
No. 344 Score Tool
- Marks a score line on plastic laminate or cementitious backer board so it can be cleanly broken.
- Contoured plastic handle holds the carbide tip at an optimal angle for scoring.
- Reversible blade includes two carbide tips.
- Blades are replaceable (No. 345).
|
No. 345 Double Blade
- Includes one each replacement blade for the Crain No. 344 Score Tool.
- Marks a score line on plastic laminate or cementitious backer board materials.
- After scoring, the material breaks along the desired score line cleanly and easily.
- Blade includes two carbide tips and is reversible in the handle of the No. 344 Score Tool.
|
No. 346 "J" Roller
- Hand roller for plastic laminate installation.
- 3” wide solid rubber roller produces 30 – 45 PSI for positive bonding.
- Rubber roller material is non-marking.
- Offset handle and recessed axle allow the roller to work close to the wall without scratching.
|
No. 348 Square Edge Roller, Long
- Seam roller for hand rolling vinyl with square edge and long nine inch wooden handle.
- Square edge and offset bracket allow the roller to work up close to walls.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 348S Square Edge Roller, Short
- Seam roller for hand rolling vinyl with square edge and shorter six inch wooden handle.
- Square edge and offset bracket allow the roller to work up close to walls.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 349 Round Edge Roller, Long
- Seam roller for hand rolling vinyl with round edge and long nine inch wooden handle.
- Round edge of this roller allows it to work up close to vinyl flash coving.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 349S Round Edge Roller, Short
- Seam roller for hand rolling vinyl with round edge and shorter six inch wooden handle.
- Round edge of this roller allows it to work up close to vinyl flash coving.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 350 Floor Stripper
- Top quality hand stripper with 12” long handle and zinc alloy head and blade clamp for durability.
- Blade clamp is fastened with 3 case hardened slotted head screws.
- Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
- Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
|
No. 351 Stripper Blades (10)
- Pack of 10 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
- The .020” thickness provides the right flexibility for fine floor prep. work.
- These blades work especially well for removing adhesive residue from concrete floors.
- Vial of ten blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
|
No. 351C Stripper Blades (100)
- Bulk pack of 100 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
- The .020” thickness provides the right flexibility for fine floor prep. work.
- These blades work especially well for removing adhesive residue from concrete floors.
- Vial of 100 blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
|
No. 353 Carbide Grout Saw
- Hand saw for removing old or damaged grout. Angled steel bracket keeps hand from contacting the floor.
- Comes with carbide blade coated with carbide grit for cutting out grout between tiles. Minimum grout joint width 1/8”.
- Comes with steel-toothed blade for heavy cleanout work after using the carbide blade.
- Both blades can be used for thick grout joints or using steel blade to protect walls when sawing near walls.
|
No. 353Y Grout Saw Replacement Blades (2)
- Replacement blades for the Crain No. 353 Grout Saw. Minimum grout joint width 1/8”.
- Includes one carbide blade coated with carbide grit, and one steel-tooth blade.
- Steel-toothed blade can be used along with carbide blade for wide grout lines.
- Steel-toothed blade can be used along with carbide blade to protect walls when grout line is close to wall.
|
No. 354 Pocket Tool Pouch
- Leather pocket pouch sized 4 ½” wide to slide easily into a pants back pocket.
- Small items like a knife or row finder wedge securely in the 3” wide x 4 ½” deep inner pocket.
- Outer flap hooks over the pants pocket to protect it and help keep the pouch from sliding out.
- Durable stitched and riveted construction. Includes 2” belt slots. Outer dimensions: 4 ½” x 7 ½”.
|
No. 356 Carbide Hole Saw
- Tungsten carbide hole saw cuts clean 1 3/8” holes for pipe clearance.
- Works well on ceramic and soft-bodied quarry tile.
- Replaceable ¼” masonry bit holds a center. Internal spring ejects the cut piece out.
- Works with a drill (not included).
|
No. 360 Pro Stripper
- Top quality hand stripper with 20” handle for two handed operation and additional reach.
- Head and blade clamp made from durable zinc alloy. Blade clamp fastens with 3 case-hardened slotted screws.
- Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
- Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
|
No. 362 Door Pin Tool
- Steel body includes a wedge with forked edge on one end and a push pin on the other.
- For hinges that are open at the bottom, insert the pin and tap to push the pin up.
- Otherwise, insert the fork-shaped edge under the pin and hammer to lift the pin.
- Once lifted, the fork is used to lift the pin all the way out.
|
No. 363 Deluxe Door Pin Tool
- Wedge-shaped tool with forked shaped edge and capture spring to hold the pin.
- Capture spring holds the greasy pin on the fork so it won’t fall on the carpet.
- For hinges that are open at the bottom, insert the pin end and tap to force the pin up.
- Otherwise, insert the fork-shaped edge under the pin and hammer wedge up.
|
No. 365 Row Separator
- Double-ended tool with a pointed end for cut pile and a beveled end for loop pile.
- Pointed end has a narrow point to penetrate the row and a wider conical surface to spread the tufts.
- Beveled end spreads loops of loop pile and Berber carpets without snagging.
- Reduces nap shear. Made from solid steel and nickel plated.
|
No. 366 Commercial Row Finder
- Ultra-straight spring steel row finder with smooth, rounded notches.
- Rounded ends easily enter the rows of Berber and loop pile carpets without catching loops.
- Move back and forth in a sawing action to open the row.
- Textured plastic handle provides good grip.
|
No. 367 Residential Row Finder
- Ultra-straight spring steel row finder with smooth, rounded notches.
- The pointed ends easily enter the rows of dense cut pile or plush carpets.
- Move back and forth in a sawing action to open the row.
- Textured plastic handle provides good grip.
|
No. 368 Deluxe Hacksaw Frame
- Sturdy steel frame with 3 ½” throat depth and high-impact plastic pistol grip handle.
- Comes with steel cutting blade.
- Frame accepts 10” or 12” blades. Blades are mountable in line with frame or at 90°, 180°, or 270° angles.
- Frame is plated to resist rust.
|
No. 369 12” Hacksaw Blades (2/card)
- Includes two each 12” carbon steel hacksaw blades for use with No. 368 Deluxe Hacksaw.
- Blades have 32 teeth per inch.
- Good for cutting aluminum cap metal and other accessory trims using the No. 176 Miter Box.
- Can also be used to cut mild steel, cast iron or copper.
|
No. 370 Recess Scriber
- Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
- Top portion adjusts the needle height based on material thickness.
- Bottom portion adjusts offset between needle the guide being used. Offset range: about 2”.
- Includes rounded end guide for walls and bottom guide for seam scribing. Replacement needles: (No. 371).
|
No. 371 Recess Scriber Repl. Pin
- Includes one replacement needle for No. 370 Recess Scriber or No. 375 18” Scribing Tool.
- Needle diameter: approx. 0.063”
- Needle length: 1 1/2”
- Needle is sharp on one end for scribing.
|
No. 372 18" Scribing Tool
- Accurately scribes longer widths from 2” to 16”. Needles are replaceable (No. 371).
- Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
- Top portion adjusts the needle height based on material thickness.
- Bottom portion adjusts offset from the rounded end guide for walls or bottom guide for seam scribing.
|
No. 375 Big Scraper
- Stand-up telescoping tube scraper with wide 8” blade for heavier removal work.
- Telescoping tubular handle adjusts from 39” to 59” using a simple twist lock mechanism.
- Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
- Great for stand-up scraping work. Comes with a No. 376 .037” thick blade, and blade cover.
|
No. 375S Short Big Scraper
- Shorter version of the Big Scraper with telescoping tubes and wide 8” blade for use while kneeling.
- Telescoping tubular handle adjusts from 19” to 26” using a simple twist-lock mechanism.
- Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
- Great to scrape wider sections while kneeling. Comes with No. 376 .037” thick blade, and blade cover.
|
No. 376 Big Scraper Blades (3)
- Pack of 3 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
- Wide 8” blade removes the widest section of material of any Crain scraper blade.
- Good for hand scraping of heavier adhesive residue.
- Comes in plastic vial of 3 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
|
No. 377 Big Scraper Blades (9)
- Pack of 9 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
- Wide 8” blade removes the widest section of material of any Crain scraper blade.
- Good for hand scraping of heavier adhesive residue.
- Comes in plastic vial of 9 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
|
No. 380 Deluxe Dividers
- Forged steel bent leg with sharpened point and adaptable straight leg for marking.
- Adaptable straight leg takes a scriber with needle or inking leg.
- Scribes up to 14” span. Bent center leg permits easier scribing along walls.
- Knurled steel thumb screws & needle holders. Repl. needle: No. 129. Inking leg: 1380-P
|
No. 382 Double-Needle Dividers
- Rounded body fits comfortably in the user’s hand.
- Bent leg and removable straight leg spans up to six inches.
- Adjusts using a folding thumbscrew. Bent leg allows easier wall scribing.
- Both legs have knurled steel caps to hold replacement needles (No. 129).
|
No. 390 Inertial Scraper
- Hand scraper with metal knob handle for hammering with a rubber mallet to scrape hard spots.
- Knob also has rounded edges to fit the palm.
- Long 18” handle, steel reinforced head, and blade clamp with three case hardened screws.
- Comes with a wide 5” blade (No. 391) with .037” thickness of our Big Scraper blades for heavy removal work.
|
No. 391 Inertial Scraper Blades (10)
- Pack of ten replacement blades for the Crain No. 390 Inertial Scraper.
- Wide 5” blades are made with the same .037” thickness as our heavy-duty Big Scraper blades.
- Stout blades can scrape up hard spots.
- Come in a plastic vial of ten blades with resealable cap.
|
No. 400 ½" Carbide Wheel
- Replacement carbide wheel for Crain Nos. 030, 031, 032X, and 033X Ceramic Tile Cutters.
- Wheel dimensions: approximately 1/2” in diameter x .075” thick.
- Wheel center hole: 1/4” diameter.
- Replacement fasteners including a steel bushing, washer, screw and lock nut are included.
|
No. 401 6-in-1 Screwdriver
- Converts between 4 most needed Phillips and slotted screwdriving tips, and provides 2 nutdriver sockets.
- Includes #1 and #2 Phillips tips, 3/16" and 5/16" slotted tips, and 1/4" and 3/16" nutdrivers
- Made with high-impact plastic ribbed handle for sure grip.
- Heat-treated alloy steel socketed drive shaft.
|
No. 407 Square Leather Tool Pouch
- Square leather pouch hangs from the belt.
- Deep 3 ¾” x 5 ½” rectangular pocket with 1” wide opening to quickly insert larger items.
- 2 ¼” wide slots go onto most belts.
- Durable riveted construction. Outer dimensions: 4 ¼ x 7”.
|
