No. 208 Acrylic 10" Glue Sticks (19 pack)
- Quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors.
- A fast alternative to aluminum drives or contact cement, they set up after 60 – 80 seconds.
- Includes 19 each 10” long sticks (1 lb. of adhesive) in a self-closing bag for storage.
- Sticks are standard 7/16” diameter for use in a wide variety of glue guns.
|
No. 209 Extra Open Time Glue Sticks
- Provides more time to position materials (approx. 3 minutes).
- Helpful to position starter boards in hardwood installation.
- Helpful to position long trim pieces.
- 10” long sticks, standard 7/16" diameter. Comes 20 sticks (1 lb.) per resealable bag.
|
No. 217 Hook Handle Razor Knife
- Slotted razor blade carpet knife with multiple added contours for improved grip.
- Wide contoured mid-section transitions to a narrow rear hook in proportion to palm and fingers.
- Rear hook gives the little finger improved advantage for greater pulling power.
- Body pivots open by loosening the folding thumbscrew for fast access to blades.
|
No. 223 1/8" Solid Carbide Drill, Ea.
- 1/8” solid carbide drill bit with two usable ends.
- Makes a 1/8” hole in concrete for fastening aluminum drives.
- Requires Crain No. 225 1/8” Hexagon Adaptor for the drill chuck.
- Drill RPM must be maintained between 1700 to 3500 RPM.
|
No. 224 3/16" Solid Carbide Drill, Ea.
- 3/16” solid carbide drill bit with two usable ends.
- Makes a 3/16” hole in concrete for fastening aluminum drives.
- Requires Crain No. 226 3/16” Hexagon Adaptor for the drill chuck.
- Drill RPM must be maintained between 1700 to 3500 RPM.
|
No. 225 1/8" Hexagon Adaptor
- Adapts 1/8” solid carbide drill bits to a standard electric drill chuck.
- Works with Crain No. 223 1/8” Solid Carbide Drill Bits.
- Shank diameter is 1/4”.
- Internal collet tightens down on the drill bit to hold it in the adaptor.
|
No. 226 3/16" Hexagon Adaptor
- Adapts 3/16” solid carbide drill bits to a standard electric drill chuck.
- Works with Crain No. 224 3/16” Solid Carbide Drill Bits.
- Shank diameter is 1/4”.
- Internal collet tightens down on the drill bit to hold it in the adaptor.
|
No. 230 Deluxe Floor Scraper
- Heavy-duty scraper with 66” long solid steel body.
- Provides the weight needed to force through and scrape up glued-down flooring materials.
- Beveled blade carrier deflects material build-up. Case hardened to reduce bending.
- Includes replaceable 2” wide high carbon steel blade that holds an edge and withstands impact.
|
No. 231 Replacement Blade
- Heavy-duty two inch wide blade for use in the No. 230 Deluxe Floor Scraper.
- Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
- Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
- Includes one each blade only.
|
No. 232 3" Replacement Blade
- Wider three inch blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material.
- Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
- Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
- Includes one each blade only.
|
No. 235 6" Disposable Cove Base Nozzle
- Inexpensive, 6” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
- Evenly spreads 5 beads of adhesive for optimal application onto 6” wide cove base.
- 5 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
- End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
|
No. 236 3" Disposable Cove Base Nozzle
- Inexpensive, 3” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
- Evenly spreads three beads of adhesive for optimal application onto 3” wide cove base.
- 3 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
- End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
|
No. 237 Quart Cove Base Gun
- Uses standard quart cove base adhesive cartridges.
- Smooth pushrod delivers continuous feed and pressure. Releases using easy-access thumb lever.
- Handy cartridge tip cutter is built in to the handle.
- Riveted 5 ½” seal puncture needle pivots out from the body to break the cartridge seal.
|
No. 238 1/10 Gallon Cove Base Gun
- Uses standard 1/10 gallon cove base adhesive cartridges.
- Smooth pushrod delivers continuous feed and pressure.
- Rod pressure is released for reloading or for stopping the flow using easy-access thumb lever.
- Durable and economical all-steel construction.
|
No. 245 Deluxe Carpet Trimmer
- Trims excess carpet at the wall leaving right amount for tucking.
- Deluxe trimmer has top-loading blade carriers for fast blade changes.
- Wide throat area results in smooth flow of carpet to the blades.
- Six shims for height adjustment and four throat adjustments for various carpets.
|
No. 246 Carpet Trimmer
- Trims excess carpet at the wall, leaving just the right amount for tucking.
- To change blades, remove the blade carrier.
- Blades are easily accessible from the top of the blade carrier.
- Shims are relieved for easy reinsertion of the blade carrier, and each has four sockets for throat adjustment.
|
No. 247 Multi-Purpose Wall Trimmer
- Rounded wall runner for trimming vinyl sheet goods or cut pile carpets.
- Anti-friction boot prevents scratching when used to trim vinyl.
- Spring-loaded center knob for blade height adjustment.
- Takes slotted razor blades for trimming vinyl, or hook blades for trimming carpet.
|
No. 250 Troxell Soft R Knee Pads
- Troxell Super-Soft knee pads size regular/medium in royal blue color.
- Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
|
No. 251 Troxell Soft L Knee Pads
- Troxell Super-Soft knee pads size large in royal blue color.
- Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
|
No. 252 Troxell XL Leather Knee Pads
- Troxell “Leather Head” knee pads, size: large.
- Durable neoprene construction with leather cover. High density closed cell foam inner pad.
- Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
- Straps fasten to the front face of the pad using hook and loop fasteners.
|
No. 265 Stand-Up Cutter
- Slices glued-down carpet into strips for faster removal, and great for rough cutting carpet off roll.
- Comes with sharp, hardened steel point with precision slot to guide utility blade.
- Point punctures glued-down carpet for fast starts. As pushed it rides on subfloor, lifting carpet to the blade.
- Heavy-duty fiberglass handle adjusts from 50” – 85” for optimal angle. Takes hook or utility blades.
|
No. 266 Replacement Point
- Sharp, hardened replacement point for the No. 265 Stand-Up Cutter with precision slot for utility blade.
- Quickly punctures glued-down carpet for fast starts.
- As the point is pushed, it rides on the subfloor and lifts carpet to the blade where it is cut.
- Includes one each replacement point only. No blades are included.
|
No. 270 Outside Silver Corner (Each)
- Silver metal corners for covering a sheet vinyl outside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 271 Inside Silver Corner (Each)
- Silver metal corners for covering a sheet vinyl inside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 272 Outside Gold Corner (Each)
- Gold metal corners for covering a sheet vinyl outside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 273 Inside Gold Corner (Each)
- Gold metal corners for covering a sheet vinyl inside corner.
- Covers up problems and are an excellent solution for repairs.
- Made approximately 6” long to cover the corner from floor height up to 6”.
- Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
|
No. 280 H.D. Air Lifter
- Moves appliances up to 800 lbs. using high pressure air jets, reducing risk of floor damage and injuries.
- Slide the load plates under the load, turn on the blower, and air plates inflate to lift the load.
- Air jets create an air cushion to glide the load over hard surfaces. Includes pads for carpet.
- Includes 2 load plates, 2 HP. motor, shoulder strap, T-connector and hoses, carpet pads and carrying bags.
|
No. 285 Personna LVT/LVP Knife
- 45° blade angle of this knife is optimal for scoring and breaking rigid core LVP/LVT.
- Elevated handle provides knuckle clearance.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Extra blades can be stored in the handle. Comes with 10 blades. Blades: No. 286C or No. 287.
|
No. 286C Personna LVP/LVT Blades (100)
- Specialty blades for No. 285 Personna LVT/LVP Knife.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
- Pack of 100 blades, incl. 10 "pocket packs" of 10 blades each. Blade dimensions: length: 1.625", width: .75", thickness: .025".
|
No. 287 Personna LVP/LVT Blades (10)
- Specialty blades for No. 285 Personna LVT/LVP Knife.
- Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
- Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
- Blister card includes 10 blades. Blade dimensions: length: 1.625", width: .75", thickness: .025".
|
No. 288 Hook Handle LVP Knife
- Takes Accutec® wide-beveled LVP scoring blades.
- Long blade carrier provides knuckle clearance, while hook handle produces pressure and pulling power.
- Also takes utility blades, hook blades, and Crain No. 321 hook for tough vinyl.
- Pivots open for blade storage.
|
No. 290 Seam Cutter Plus
- Excels on carpets with zig-zag tufting including commercial loop pile and Berber carpets.
- Blade runs directly behind row guide, keeping it away from hydra-shift stopovers.
- Reduces shearing of yarns to produce better looking seams.
- Also works as a Z-bar or a vinyl molding trimmer.
|
No. 292C H.D. Utility Blades Disp. Pack (100)
- Plastic dispenser pack of 100 heavy-duty utility blades with sliding tab to dispense one blade at a time.
- These blades can be used in most standard utility knives that take heavy-duty utility blades.
- Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
- Blade dimensions: length: 2.40", width: .75", thickness: .025".
|
No. 295C Heavy-Duty Utility Blades (100)
- Pack of 100 Personna® heavy-duty utility blades which are individually wrapped in paper and packaged in a laminated paper box.
- These blades can be used in most standard utility knives that take heavy-duty utility blades.
- Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
- Blade dimensions: length: 2.40", width: .75", thickness: .025". Individually wrapped blades packaged in laminated paper box.
|
No. 296 Vaughan Half Hatchet
- A multi-purpose tool for cutting and hammering down tackless strip.
- Polished head includes 3 ½” blade and hammering head.
- Hickory hardwood handle is contoured for gripping.
- Durable Vaughan quality product made in the USA!
|
No. 299Y Top Cutter Repl. Blades (10)
- Pack of 10 blades for the discontinued Crain No. 298 Top Cutter.
- When used with the Top Cutter, this elongated blade can double cut carpet from the face.
- For use with the Crain No. 298 Top Cutter only.
- Blade dimensions: length: 3.00", width: .745", thickness: .025".
|
No. 300 Loop Pile Cutter
- Great for rough cutting of carpet off the roll.
- Versatile design takes slotted razor, utility, or Crain No. 300Y blades.
- With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarns.
- Large thumb knob permits simple, fast blade changes.
|
No. 300Y Loop Pile Cutter Repl. Blades (10)
- Pack of 10 replacement blades for the Crain No. 300 Loop Pile Cutter. Packaged in a plastic box with hinged lid that snaps shut.
- Blades have 2 holes for a blade screw on early models of the No. 300 (black plastic body), but also work in later models.
- When used in the No. 300, they cut the carpet from the backing, reducing the shearing of yarns and wadding up of carpet.
- Blades are reversible for added life. Blade dimensions: length: 2.31", width: .75", thickness: .025".
|
No. 301 Cushion Back Cutter
- Precision blade pockets on left and right side hold slotted blades without screws.
- Trims seam edges close to the carpet’s tufting to produce better seams.
- 30° blade angle cuts cushion-back carpets cleanly.
- Beveled front guide follows the carpet’s rows. Soft grip handle provides comfort and control.
|
No. 302 Cushion Lock Cutter
- Offset blade clamp allows fast blade depth adjustment and blade changes. Takes standard slotted razor blades.
- Front guide has rounded notches to help find rows in difficult carpet including Berbers, hydrashift and commercial level loop.
- 30° blade angle cleanly trims the carpet's edges for seaming.
- Soft grip handle provides control and comfort.
|
No. 303 Loop Pile Cutter
- Includes base for cutting over pad or other carpet that protects material underneath.
- Blade carrier is adjustable in height so that it locks down on the rows of carpet.
- Dual blade pockets on left and right sides, and large thumb knob to lock in the blades.
- “Triple tight” 3 thumb knob construction helps produce accurate cuts.
|
No. 304 Versa-Cutter
- Versatile and durable carpet cutter with steel row guide for improved accuracy.
- Takes slotted razor, utility, or Crain No. 300Y blades. Dual springs hold the carpet down.
- With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarn.
- Steel foot plate reduces wear for long-term durability.
|
No. 306C Regular-Duty Slotted Razor Blades
- Pack of 100 Personna® regular-duty (.015" thick) round-edge slotted razor blades.
- Reduced thickness fits older model Crain tools that take thinner blades (Crain No. 124, 301, 302).
- Not recommended for newer Crain tools designed for heavy-duty slotted blades (Nos. 308C/309C - .017” thick).
- Blades individually wrapped and come in a laminated paper box. Blade dim.: length: 2.25", width: .75", thick: .015".
|
No. 308C Heavy-Duty Round Edge Slotted Razor Blades
- Pack of 100 Personna® heavy-duty (.017 thick) round edge slotted razor blades.
- Rounded corners of round edge blades ride on the subfloor without digging in and increasing resistance.
- Blades are individually wrapped in paper and are packed in a laminated paper box.
- Blade dimensions: length: 2.25", width: .75", thickness: .017".
|
No. 309C Heavy-Duty Square Edge Slotted Razor Blades
- Pack of 100 Personna® heavy-duty (.017 thick) square edge slotted razor blades which are individually wrapped in paper.
- Square edge blades provide a sharp, precise point for starting a cut with the knife.
- Square edge blades cut to full depth when used in seam cutters such as Crain No. 301 or No. 302.
- Blades are packed in a laminated paper box. Blade dimensions: length: 2.25", width: .75", thickness: .017".
|
No. 310 Dividers
- Double-needle dividers with rounded radius arm and large wing nut.
- Legs span from ½” to 6” apart. Needles press fit into the legs.
- Rounded arm provides smooth adjustment and solid hold.
- Comes with two needles in the tool and two replacement needles.
|
No. 311 Divider Repl. Pins (2)
- Pack of two replacement needles for The No. 310 Dividers.
- Approximately 7/8” long and 0.060” in diameter.
- Each needle has a sharp point for scribing.
- These needles press fit into either leg of the No. 310 Dividers.
|
No. 320 Vinyl Wall Trimmer
- Accurately trims sheetgoods net to the wall.
- Adjustable front guide holds the material in position against the wall.
- Adjustable rear guide keeps the trimmer running parallel with the wall for smooth trimming.
- Low profile hand contours help to keep the tool flat against the floor in use. Repl. blades: No. 321.
|
No. 321 Vinyl Wall Trimmer Blades (3)
- Pack of three hook blades for the No. 321 Vinyl Wall Trimmer.
- Reversible blade includes two cutting hook edges.
- Blades come in a plastic box with hinged lid for storage.
- Blade dimensions: length: 2.30", width: .50", thickness: .025".
|
No. 330 Push-Button Carpet Knife
- Pivots open by pressing the spring-loaded rear button to access the slotted razor blades.
- Contoured red handle includes knurling on both sides for improved grip.
- Large radiused fin behind the blade carrier for thumb pressure and improved control.
- This carpet knife takes slotted razor blades.
|
