No. 321 Vinyl Wall Trimmer Blades (3)
- Pack of three hook blades for the No. 321 Vinyl Wall Trimmer.
- Reversible blade includes two cutting hook edges.
- Blades come in a plastic box with hinged lid for storage.
- Blade dimensions: length: 2.30", width: .50", thickness: .025".
|
No. 330 Push-Button Carpet Knife
- Pivots open by pressing the spring-loaded rear button to access the slotted razor blades.
- Contoured red handle includes knurling on both sides for improved grip.
- Large radiused fin behind the blade carrier for thumb pressure and improved control.
- This carpet knife takes slotted razor blades.
|
No. 332 Economy Hammer
- 20 oz. claw hammer for hammering down and pulling up tack strip.
- Forged, induction hardened steel head includes magnetic nail holder.
- Durable fiberglass handle is jacketed for overstrike protection.
- Handle includes contoured grip. Fully featured and excellent value.
|
No. 333 Extension Wall Roller
- Hand roller for vinyl with three rubber rollers.
- Rollers produce good pressure without scratching or scuffing.
- Rolls a 7 ½” section each pass. Recessed axle works close to walls without scratching.
- Twist-lock tube assembly adjusts handle length from 17” to 27”.
|
No. 334 6' Professional Straight Edge
- Six foot straight edge for making seams in sheet vinyl and like materials.
- Precision edges are ground for straightness with accuracy of +/-.003”.
- Made from special spring steel that will return to its flat condition even after being bent.
- One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 6' x 3" x 1/8".
|
No. 334S 4' Professional Straight Edge
- Four foot straight edge for making seams in sheet vinyl and like materials.
- Precision edges are ground for straightness with accuracy of +/-.003”.
- Made from special spring steel that will return to its flat condition even after being bent.
- One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 4' x 3" x 1/8".
|
No. 335 Undercut Saw Blade
- Replacement blade for the No. 336 Undercut Saw for hand undercutting of wood door jambs.
- Blade includes studs for mounting to the bracket of the No. 336 Undercut Saw.
- Trapezoidal shape provides clearance.
- Includes 12” row of 10 point teeth on both sides. Made from high carbon steel for good blade life.
|
No. 336 Undercut Saw
- Hand undercutting saw with heavy-duty wood handle, steel bracket, and replaceable 12” blade.
- Trapezoidal high carbon steel blade includes a row of 10 point teeth on both sides.
- Saw includes a front knob for working with both hands to increase cutting power.
- Good for cutting wood door jambs by hand. Replacement blade: No. 335.
|
No. 337 Duster Brush
- 8” duster brush made with durable blended horsehair bristles.
- Tends not to scratch on most floors.
- Wooden handle is very tough and impact-resistant.
- Bristle area: 8” long x 2 ½” wide. Handle length: 5”. Great for use with dust pan (Crain No. 666).
|
No. 339 Flex Undercut Repl. Blade
- One replacement blade for the Crain No. 338 Flex Undercut Saw.
- Flexible blade bends at the floor for hand undercutting wood door jambs.
- Both sides of blade have a 9 inch double row of staggered, ultra-fine induction hardened teeth.
- Blade provides easier starts, fast cutting, and smooth results.
|
No. 340 Selvage Trimmer
- Trims the factory selvage, so the sheet can be accurately scribed and seamed.
- Insert the selvage edge in the guidance slot, and the blade is properly positioned.
- Simply pull the tool through the material and the selvage is removed.
- Replaceable U-shaped blade makes a clean, square cut.
|
No. 341 Selvage Trimmer Repl. Blade (1)
- One each replacement blade for the No. 340 Selvage Trimmer.
- Trims the factory selvage so the sheet can be accurately scribed and seamed.
- U-shaped blade ensures a smooth, accurate cut.
- Trimmed edge will be perpendicular to the floor to match an adjacent edge.
|
No. 342 Selvage Trimmer Repl. Blades (3)
- One each replacement blade for the No. 340 Selvage Trimmer.
- Trims the factory selvage so the sheet can be accurately scribed and seamed.
- U-shaped blade ensures a smooth, accurate cut.
- Trimmed edge will be perpendicular to the floor to match an adjacent edge.
|
No. 344 Score Tool
- Marks a score line on plastic laminate or cementitious backer board so it can be cleanly broken.
- Contoured plastic handle holds the carbide tip at an optimal angle for scoring.
- Reversible blade includes two carbide tips.
- Blades are replaceable (No. 345).
|
No. 345 Double Blade
- Includes one each replacement blade for the Crain No. 344 Score Tool.
- Marks a score line on plastic laminate or cementitious backer board materials.
- After scoring, the material breaks along the desired score line cleanly and easily.
- Blade includes two carbide tips and is reversible in the handle of the No. 344 Score Tool.
|
No. 346 "J" Roller
- Hand roller for plastic laminate installation.
- 3” wide solid rubber roller produces 30 – 45 PSI for positive bonding.
- Rubber roller material is non-marking.
- Offset handle and recessed axle allow the roller to work close to the wall without scratching.
|
No. 348 Square Edge Roller, Long
- Seam roller for hand rolling vinyl with square edge and long nine inch wooden handle.
- Square edge and offset bracket allow the roller to work up close to walls.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 348S Square Edge Roller, Short
- Seam roller for hand rolling vinyl with square edge and shorter six inch wooden handle.
- Square edge and offset bracket allow the roller to work up close to walls.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 349 Round Edge Roller, Long
- Seam roller for hand rolling vinyl with round edge and long nine inch wooden handle.
- Round edge of this roller allows it to work up close to vinyl flash coving.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 349S Round Edge Roller, Short
- Seam roller for hand rolling vinyl with round edge and shorter six inch wooden handle.
- Round edge of this roller allows it to work up close to vinyl flash coving.
- Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
- Ball bearing construction produces smooth rolling action.
|
No. 350 Floor Stripper
- Top quality hand stripper with 12” long handle and zinc alloy head and blade clamp for durability.
- Blade clamp is fastened with 3 case hardened slotted head screws.
- Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
- Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
|
No. 351 Stripper Blades (10)
- Pack of 10 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
- The .020” thickness provides the right flexibility for fine floor prep. work.
- These blades work especially well for removing adhesive residue from concrete floors.
- Vial of ten blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
|
No. 351C Stripper Blades (100)
- Bulk pack of 100 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
- The .020” thickness provides the right flexibility for fine floor prep. work.
- These blades work especially well for removing adhesive residue from concrete floors.
- Vial of 100 blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
|
No. 353 Carbide Grout Saw
- Hand saw for removing old or damaged grout. Angled steel bracket keeps hand from contacting the floor.
- Comes with carbide blade coated with carbide grit for cutting out grout between tiles. Minimum grout joint width 1/8”.
- Comes with steel-toothed blade for heavy cleanout work after using the carbide blade.
- Both blades can be used for thick grout joints or using steel blade to protect walls when sawing near walls.
|
No. 353Y Grout Saw Replacement Blades (2)
- Replacement blades for the Crain No. 353 Grout Saw. Minimum grout joint width 1/8”.
- Includes one carbide blade coated with carbide grit, and one steel-tooth blade.
- Steel-toothed blade can be used along with carbide blade for wide grout lines.
- Steel-toothed blade can be used along with carbide blade to protect walls when grout line is close to wall.
|
No. 354 Pocket Tool Pouch
- Leather pocket pouch sized 4 ½” wide to slide easily into a pants back pocket.
- Small items like a knife or row finder wedge securely in the 3” wide x 4 ½” deep inner pocket.
- Outer flap hooks over the pants pocket to protect it and help keep the pouch from sliding out.
- Durable stitched and riveted construction. Includes 2” belt slots. Outer dimensions: 4 ½” x 7 ½”.
|
No. 356 Carbide Hole Saw
- Tungsten carbide hole saw cuts clean 1 3/8” holes for pipe clearance.
- Works well on ceramic and soft-bodied quarry tile.
- Replaceable ¼” masonry bit holds a center. Internal spring ejects the cut piece out.
- Works with a drill (not included).
|
No. 360 Pro Stripper
- Top quality hand stripper with 20” handle for two handed operation and additional reach.
- Head and blade clamp made from durable zinc alloy. Blade clamp fastens with 3 case-hardened slotted screws.
- Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
- Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
|
No. 362 Door Pin Tool
- Steel body includes a wedge with forked edge on one end and a push pin on the other.
- For hinges that are open at the bottom, insert the pin and tap to push the pin up.
- Otherwise, insert the fork-shaped edge under the pin and hammer to lift the pin.
- Once lifted, the fork is used to lift the pin all the way out.
|
No. 363 Deluxe Door Pin Tool
- Wedge-shaped tool with forked shaped edge and capture spring to hold the pin.
- Capture spring holds the greasy pin on the fork so it won’t fall on the carpet.
- For hinges that are open at the bottom, insert the pin end and tap to force the pin up.
- Otherwise, insert the fork-shaped edge under the pin and hammer wedge up.
|
No. 365 Row Separator
- Double-ended tool with a pointed end for cut pile and a beveled end for loop pile.
- Pointed end has a narrow point to penetrate the row and a wider conical surface to spread the tufts.
- Beveled end spreads loops of loop pile and Berber carpets without snagging.
- Reduces nap shear. Made from solid steel and nickel plated.
|
No. 366 Commercial Row Finder
- Ultra-straight spring steel row finder with smooth, rounded notches.
- Rounded ends easily enter the rows of Berber and loop pile carpets without catching loops.
- Move back and forth in a sawing action to open the row.
- Textured plastic handle provides good grip.
|
No. 367 Residential Row Finder
- Ultra-straight spring steel row finder with smooth, rounded notches.
- The pointed ends easily enter the rows of dense cut pile or plush carpets.
- Move back and forth in a sawing action to open the row.
- Textured plastic handle provides good grip.
|
No. 368 Deluxe Hacksaw Frame
- Sturdy steel frame with 3 ½” throat depth and high-impact plastic pistol grip handle.
- Comes with steel cutting blade.
- Frame accepts 10” or 12” blades. Blades are mountable in line with frame or at 90°, 180°, or 270° angles.
- Frame is plated to resist rust.
|
No. 369 12” Hacksaw Blades (2/card)
- Includes two each 12” carbon steel hacksaw blades for use with No. 368 Deluxe Hacksaw.
- Blades have 32 teeth per inch.
- Good for cutting aluminum cap metal and other accessory trims using the No. 176 Miter Box.
- Can also be used to cut mild steel, cast iron or copper.
|
No. 370 Recess Scriber
- Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
- Top portion adjusts the needle height based on material thickness.
- Bottom portion adjusts offset between needle the guide being used. Offset range: about 2”.
- Includes rounded end guide for walls and bottom guide for seam scribing. Replacement needles: (No. 371).
|
No. 371 Recess Scriber Repl. Pin
- Includes one replacement needle for No. 370 Recess Scriber or No. 375 18” Scribing Tool.
- Needle diameter: approx. 0.063”
- Needle length: 1 1/2”
- Needle is sharp on one end for scribing.
|
No. 372 18" Scribing Tool
- Accurately scribes longer widths from 2” to 16”. Needles are replaceable (No. 371).
- Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
- Top portion adjusts the needle height based on material thickness.
- Bottom portion adjusts offset from the rounded end guide for walls or bottom guide for seam scribing.
|
No. 375 Big Scraper
- Stand-up telescoping tube scraper with wide 8” blade for heavier removal work.
- Telescoping tubular handle adjusts from 39” to 59” using a simple twist lock mechanism.
- Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
- Great for stand-up scraping work. Comes with a No. 376 .037” thick blade, and blade cover.
|
No. 375S Short Big Scraper
- Shorter version of the Big Scraper with telescoping tubes and wide 8” blade for use while kneeling.
- Telescoping tubular handle adjusts from 19” to 26” using a simple twist-lock mechanism.
- Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
- Great to scrape wider sections while kneeling. Comes with No. 376 .037” thick blade, and blade cover.
|
No. 376 Big Scraper Blades (3)
- Pack of 3 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
- Wide 8” blade removes the widest section of material of any Crain scraper blade.
- Good for hand scraping of heavier adhesive residue.
- Comes in plastic vial of 3 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
|
No. 377 Big Scraper Blades (9)
- Pack of 9 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
- Wide 8” blade removes the widest section of material of any Crain scraper blade.
- Good for hand scraping of heavier adhesive residue.
- Comes in plastic vial of 9 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
|
No. 380 Deluxe Dividers
- Forged steel bent leg with sharpened point and adaptable straight leg for marking.
- Adaptable straight leg takes a scriber with needle or inking leg.
- Scribes up to 14” span. Bent center leg permits easier scribing along walls.
- Knurled steel thumb screws & needle holders. Repl. needle: No. 129. Inking leg: 1380-P
|
No. 382 Double-Needle Dividers
- Rounded body fits comfortably in the user’s hand.
- Bent leg and removable straight leg spans up to six inches.
- Adjusts using a folding thumbscrew. Bent leg allows easier wall scribing.
- Both legs have knurled steel caps to hold replacement needles (No. 129).
|
No. 390 Inertial Scraper
- Hand scraper with metal knob handle for hammering with a rubber mallet to scrape hard spots.
- Knob also has rounded edges to fit the palm.
- Long 18” handle, steel reinforced head, and blade clamp with three case hardened screws.
- Comes with a wide 5” blade (No. 391) with .037” thickness of our Big Scraper blades for heavy removal work.
|
No. 391 Inertial Scraper Blades (10)
- Pack of ten replacement blades for the Crain No. 390 Inertial Scraper.
- Wide 5” blades are made with the same .037” thickness as our heavy-duty Big Scraper blades.
- Stout blades can scrape up hard spots.
- Come in a plastic vial of ten blades with resealable cap.
|
No. 400 ½" Carbide Wheel
- Replacement carbide wheel for Crain Nos. 030, 031, 032X, and 033X Ceramic Tile Cutters.
- Wheel dimensions: approximately 1/2” in diameter x .075” thick.
- Wheel center hole: 1/4” diameter.
- Replacement fasteners including a steel bushing, washer, screw and lock nut are included.
|
No. 401 6-in-1 Screwdriver
- Converts between 4 most needed Phillips and slotted screwdriving tips, and provides 2 nutdriver sockets.
- Includes #1 and #2 Phillips tips, 3/16" and 5/16" slotted tips, and 1/4" and 3/16" nutdrivers
- Made with high-impact plastic ribbed handle for sure grip.
- Heat-treated alloy steel socketed drive shaft.
|
No. 407 Square Leather Tool Pouch
- Square leather pouch hangs from the belt.
- Deep 3 ¾” x 5 ½” rectangular pocket with 1” wide opening to quickly insert larger items.
- 2 ¼” wide slots go onto most belts.
- Durable riveted construction. Outer dimensions: 4 ¼ x 7”.
|
No. 420 Trowel 1/16 x 1/16 x 1/16 Square Notch
- 1/16” open x 1/16” flat x 1/16” deep square-notched trowel.
- Front edge is angled back 10° for clearance when spreading close to the wall.
- Wooden handle is curved for comfortable grip.
- Handle bracket is welded to the spring steel blade. Add "L" to the No. 420 for left-handed model (i.e. No. 420L).
|
