No. 533 Replacement Blade
- Includes one each replacement blade only for the Crain No. 532 Topset Gouge.
- Forms a 5/32” wide groove on the back side of vinyl or rubber cove base.
- Produces tight-wrapped corners by reducing excess fullness which can cause gaps and puckering.
- Blade is resharpenable.
|
No. 535 3' Carpet Straight Edge
- Three foot aluminum straight edge useful for most carpet installation purposes.
- Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
- Includes 45° angle on one end, and a hanging hole on the other.
- Economical and lightweight. Dimensions: 36" long x 2 1/2" wide x 3/16" thick.
|
No. 536 6' Carpet Straight Edge
- Six foot aluminum straight edge useful for most carpet installation purposes.
- Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
- Includes 45° angle on one end, and a hanging hole on the other.
- Economical and lightweight. Dimensions: 72" long x 2 1/2" wide x 3/16" thick.
|
No. 543 Aviation Snips
- Top quality compound leverage metal snips great for making straight cuts in aluminum accessory trims.
- Alloy steel blades make up to 1 11/16” long cuts and provide durability for long term performance.
- Handles include “soft-touch” grips which reduce twisting in the hand under forceful squeezing.
- Can cut sheet metal when necessary.
|
No. 553 Engineered Wood Stapling Tool
- Adjustable stapling tool that works close to walls generally within the width of one board.
- Adjusts to different engineered plank thicknesses from 3/8” to 3/4” with the adjustable foot plate.
- Insert a staple in the channel and hammer into the subfloor using the unique offset driver.
- Tool includes separator for separating individual staples. Takes 18 gauge (1/4" crown) staples.
|
No. 556 Carbide-Tipped Blade
- Replacement carbide-tipped blade for use on Crain No. 545 or No. 555 undercut saws.
- 36 tooth blade approximately 5 ½” diameter blade.
- For use cutting wood base, moldings, door jams and drywall only.
- Not for use in cutting metal, masonry, ceramic tile, or stone.
|
No. 557 Hardwood Pry Bar
- Bar for wedging bowed planks into position.
- One end with curved shape and a sharp point is placed against the bowed board.
- When the opposite end is hammered, a wedging action forces the bowed board in place, closing the gap.
- Sharp point penetrates wood subfloors cleanly. Long 11” handle provides leverage when needed.
|
No. 560 Knuckle Head Pull Bar
- Steel pull bar designed to take heavy hammering when necessary to pull planks together.
- Boxed “knuckle-shaped” hammering head is welded to the body.
- 3/16” thick body is made 3” wide to reduce bending down the length as tool is hammered.
- 16 1/2” long overall for 14 1/2” working room when used near wall. Felt pads reduce scratching.
|
No. 562 Plastic Spacers (10)
- Maintains expansion gap between the wall and the plank even when the wall is undercut.
- With the V-shape, one end goes in the gap, and the other braces on the face of the plank.
- Two ends have different thicknesses, one 3/16” and the other 1/4” for manufacturer’s specifications.
- Eliminates tipping problems with other spacers. Comes in a pack of 10 spacers.
|
No. 563 Tapping Block
- Block for tapping and moving planks while also protecting the edges of the plank.
- Block is sized 3” wide x 7” long x ¾” thick. Bottom is relieved on a side and an end.
- Put the block on a plank at a relieved edge and it can tap the plank against its outer edge.
- Reduces risk of chipping the plank. Large plastic handle makes it easy to move and position.
|
No. 564 Variable Wall Spacer
- Used to space planks from the wall to form the expansion gap necessary with plank floors.
- Provides variable spacing when the wall adjacent to the planks is not straight.
- Large threaded pushrod is turned using the oversized ergonomic twist knob.
- Knob has a steel hex insert for a hex wrench. Pressure pad has rubber insert to protect walls.
|
No. 565 18' Strap Clamp
- Pulls planks together across lengths of up to 19 feet.
- Nylon strap coils internally as strap is retracted and stays out of the way.
- Long base hooks onto planks even under toe spaces.
- Includes large knob for rapid retraction after clamping is complete.
|
No. 566 Strap Clamp Bullnose Adaptor
- Adaptor to Crain No. 565 18’ Strap Clamp holds bullnose in place as the glue dries, or for hands-free nailing.
- Slides on the base of the clamp to create a large, radiused clamping surface conforming to 1” bullnose material.
- Radiused clamping surface includes a felt pad to prevent scratching the bullnose.
- Strap Clamp and adaptor sold separately.
|
No. 569 11 3/4" Tapping Block
- 113/4” solid plastic block with a long, U-shaped handle for greater control.
- Use with a hammer to tap the sides or ends of the boards to eliminate gaps. Reduces risk of damage.
- Relieved on one side and one end to fit over the tongue of the board and contact squarely against the side.
- Dimensions: 3” wide x 113/4’ long x 3/4” thick.
|
No. 570 Clear Can
- Great way to store nails and quickly dispense them on the job.
- Resealable lid is threaded on the clear plastic body and is easily removed to add nails.
- Squeezing the clear plastic body opens the lid to dispense the right amount of nails.
- After releasing, lid closes and won’t spill. Lid and bottom made from durable thick ribbed vinyl.
|
No. 575 Multi-Undercut Saw
- Compact, 8 AMP undercut saw works best for fast undercutting of jambs. Also cuts walls and inside corners.
- Height of cut adjustable from flush to 1” above floor level. Handle folds for undercutting toe-kicks.
- Dual-angle depth gauge allows cutting at “straight on” or 45° angles. Maximum depth of cut: 1 1/4".
- Comes with carbide blade, carrying case, blade wrench, and instructions.
|
No. 576 LVP Angle Tapping Block
- Lifts the LVP plank to the angle where it can be tapped and locked tight.
- Large upper plastic block contacts just below the face of the plank. Lower plastic contact plate extends to contact the core.
- Comes with three 1mm shims and two 3mm shims for planks up to 10mm thick.
- Extra contact plates and shims sold separately.
|
No. 580 Aluminum Drives
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
- Oval head seats in metal moldings with countersunk holes.
- Semi-square body compresses against pre-drilled 1/8” hole.
- Fastener dim.: 1/8” dia. X 5/8” long. Hole: 1/8” dia. x 3/4” deep.
|
No. 605 Deluxe Knee Kicker
- High profile body more easily spans over stretcher tubes, plus thicker rubber bumper.
- Recessed trigger provides 5 length settings from 18 ½” to 22 ½”.
- Visual pin depth dial provides nine depth settings for various carpets.
- Power rods support the pin plate and improve force transfer to the carpet.
|
No. 614 7" Pad Staple Saver Box
- Protective plastic box for 7” pad staple boxes.
- Made from durable telescoping tubes.
- Detented internal closure mechanism holds the lid on tight.
- Protects staple boxes. Saving staples saves money!
|
No. 617 Staple Saver Box (5418)
- Designed specifically to hold Duo-Fast No. 5418 Electric Tacker Staples.
- Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
- Protects boxes and staples in the tool box.
- Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
|
No. 618 Staple Saver Box (7512)
- Designed specifically to hold Duo-Fast® No. 7512 Hammer Tacker Staples.
- Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
- Protects boxes and staples in your tool box.
- Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
|
No. 619 Shur-Fast® Staples (5M)
- Unique thermoplastic coating and precision ground “sharp point” (SP) 60° angle points.
- Efficiently penetrate hardwoods for greater holding power.
- Preferred for use in Crain electric tackers for reduced misfiring and jamming.
- 9/16” Leg - 3/16” crown - 20 GA. Shur-Fast® is a registered trademark of the Shur-Fast® corporation.
|
No. 627 Carpet Edge Sealing Tip
- Precision glue tip only for popular glue guns at an upright angle in a convenient pulling motion.
- Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
- During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
- Standard thread (7/16" - 20) fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes.
|
No. 628 1/4" Nozzle
- 1/4” diameter nozzle with crimped end. Good for seam edge sealing.
- Thin opening (1/32” high x 7/32” wide) delivers narrow cross section of glue.
- Works in Crain Nos. 203, 204 or 207 Glue Guns or others with standard thread.
- Thread size: 7/16" major diameter- 20 threads per inch.
|
No. 629 1/8" Nozzle
- Extended 1/8” tube (.085” inside diameter) nozzle.
- Works well for sealing the edges of carpet seams.
- Works in Crain No. 203, 204 or 207 Glue Guns or others with standard thread.
- Thread size: 7/16" major diameter- 20 threads per inch.
|
No. 635 Opto Power Tacker
- Ruggedized control board includes electronic sensor that fires in response to motion of a tough sliding trigger.
- Eliminates the delicate mechanical microswitch that frequently required repair. Powerful 11 AMP solenoid drives into hardwoods.
- Long, slender nose more easily parts yarns and penetrates down to the backing for stapling.
- Short height, narrow profile, and rounded cap help it get into tight areas.
|
No. 666 Dust Pan
- Professional grade dust pan stamped from a single sheet of 20 gauge steel.
- Beveled lip is 12” wide for sweeping in debris.
- Formed with large corrugated ribs in the pan and at corners for extra stiffness and durability.
- Painted blade with baked-on enamel finish.
|
No. 670 Hardwood Plank Jack
- Jack is powered by a threaded pushrod that can produce up to 2000 lbs. of force.
- It does not have backlash or dog breakage problems associated with dog and ratchet jacks.
- Turn the ratcheting handle and this jack pushes and holds. Push down on handle to quickly adjust length.
- Works along walls or fastens down for use in the middle of the room using holes in the base.
|
No. 673 13" Wood Cutter
- Cuts plank flooring materials up to ¾” thick. Comes fully assembled.
- Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
- Includes wheels allowing the cutter to be easily moved from a kneeling position.
- Movable fence positions planks for straight or 45° diagonal cuts plus cut guide for repeat cuts
|
No. 675 24" Carpet Tile Cutter
- Cuts carpet tiles, soft vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Works on materials up to ¾” thick.
- Includes wheels allowing the cutter to be easily moved from a kneeling position.
- Movable fence and tile guide can be set for repetitive straight or diagonal cuts.
- Comes fully assembled. Repl. blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 676.
|
No. 679 9" Wood Cutter
- Cuts plank flooring up to 3/4” thick. Cuts up to 9” wide planks.
- Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
- Movable fence positions the material on either side of the blade for increased blade life.
- Comes fully assembled. Replacement blade: No. 681 9” Wood Cutter Blade.
|
No. 684 Extension Cord
- 25 foot long 16 gauge 3 conductor grounded extension cord.
- Constructed for use with power tools indoors or outdoors.
- Rated for usage up to 13 AMPs at 125 volts.
- Plug and receptacle are molded on the cordage for durability.
|
No. 687 Stand-Up Carpet Peeler Pin
- One each steel replacement pin for the No. 686 Stand-Up Carpet Peeler.
- This pin is driven beneath the carpet and peels it back using the leverage of the tool.
- Made from hardened steel with sharp point.
- Easily punctures and gets beneath glued-down carpet.
|
No. 701 4” x 6” Vinyl Blade
- Hardened, high-carbon steel blade has a 6” long sharpened edge.
- Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
|
No. 702D 4” x 6” Double-Edge Vinyl Blade
- Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
- Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
|
No. 703 5” x 6” Carpet Blade
- Hardened, high-carbon steel blade has a 6” long sharpened edge.
- 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on side only.
|
No. 704D 5” x 6” Double-Edge Carpet Blade
- Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
- 5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
|
No. 705 3” x 10” Multi-Purpose Blade
- Hardened, high-carbon steel blade has a 10” long sharpened edge.
- Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions 3” tall x 10” wide x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
|
No. 706D 3” x 10” Double-Edge Multi-Purpose Blade
- Hardened, high-carbon steel blade has two 10” long sharpened edges, providing double the blade life.
- Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
- Works on Crain No. 700 and No. 710 stripper machines.
- Dimensions: 3” wide x 10” long x .079 thick. Sharp edge is ground to a 30° bevel on both sides.
|
No. 707 3” x 16” Hard-Set Adhesive Blade
- Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
- 3” width produces a stiffer blade for removing hard-setting adhesive residues.
- Good for removing epoxy adhesives, thin-set mortar, or cement-based patch.
- Dimensions: 3” tall x 16” wide x .079” thick. Sharp edge ground to 30° bevel on one side only.
|
No. 708 5” x 16” Soft-Set Adhesive Blade
- Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
- 5” width produces a blade with more flex for removing soft-setting adhesive residue.
- Good for removing latex or urethane-based adhesives, or gypsum-based patch.
- Dimensions: 5” wide x 16” long x .079” thick. Sharp edge ground to 30° bevel on one side only.
|
No. 710 Power Stripper
- Power Channel construction produces forward stripping blade motion with more focused energy.
- Cam action of the 1 HP motor is channeled straight ahead using steel channels and ball bearings.
- Blade carrier forms ultra-low blade angle allowing the blade to get beneath the material to be removed.
- Includes 5 1/2” x 3 1/8” x 1/4” Spud Blade for light tile and wood removal, 3” x 10” multi blade, and 35 lb. weight.
|
No. 711 Spud Blade
- Heavy-duty extra-thick stripper blade for removal of ceramic tile or wood floors.
- Narrow 3 1/8” ground edge takes up narrow sections as is often required on wood floor takeup.
- Long 5 1/2” body provides reach to prevent the blade carrier from contacting surrounding material.
- For use on the Crain No. 710 Power Stripper only. Dimensions: Length: 5 1/2" x Width: 3 1/8" x 1/4" thick.
|
No. 712 #12 Open End Thimble, Small
- English size #12 (U.S.A. size #0) small open-end sewing thimble.
- Works well on small-sized fingers.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the finger and exposes fingertip for gripping.
|
No. 713 #13 Open End Thimble, Medium
- English size #13 (U.S.A. size #00) medium open-end sewing thimble.
- Works well on medium-sized fingers.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the finger and exposes fingertip for gripping.
|
No. 714 #14 Open End Thimble, Large
- English size #14 large open-end sewing thimble.
- Works well on large-sized fingers.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the finger and exposes fingertip for gripping.
|
No. 715 #00 Open End Thimble, Thumb
- Extra-large open-end sewing thimble.
- Works well on the thumb.
- Outer surface has coarse grate for pushing the needle point.
- Open end helps it stay on the thumb and exposes the end of the thumb for gripping.
|
No. 718 Power Scraper
- Light and highly maneuverable machine with ½ horsepower motor can take up heavy adhesive residue, vinyl or VCT.
- Power channel construction forces the blade forward with more focused energy.
- Collapses quickly for easy carrying. The all-steel frame and handle provides rigidity and durability.
- Includes No. 701 4" x 6" Vinyl Blade, No. 705 3" x 10" Multi-Purpose Blade and narrow No. 719 3½" x 3¾" Thin Spud Blade for tough take ups.
|
No. 719 3 1/2" x 3 3/4" Thin Spud Blade
- Hardened, high-carbon steel blade has a 3 1/2” sharpened edge.
- Takes up a narrow section of material. Works well on tough take-up jobs because it reduces resistance.
- Works on Crain No. 710 or No. 718 stripper machines.
- Dimensions: 3 3/4" tall x 3 1/2" wide x .079" thick. Ground to a 30° bevel on one side only.
|
