Product List

No. 880
No. 880 Vinyl Mitre
  • Makes clean, ultra-straight cuts in vinyl trims much faster than with a knife.
  • Cut pieces come together perfectly to form more attractive corners.
  • Tool includes a gauge for cutting the trim at a 45° angle to form a corner, or straight for butt cuts.
  • Razor sharp blade is replaceable (No. 881).
No. 881
No. 881 Replacement Blades (3)
  • Pack of 3 replacement blades for the No. 880 Vinyl Mitre.
  • Blades create 45° cuts in vinyl trims for more attractive corners.
  • Razor-sharp edges make clean, accurate cuts in the trim so that cut pieces come together perfectly.
  • Comes in a plastic box that snaps closed for storage.
No. 898
No. 898 Iron Combo Case Only
  • All-steel case for carrying and protection 3 or 6 inch irons.
  • Inner partition for a roll of tape and space to loosely lay the iron cord.
  • Case top is connected by piano-style hinge, and includes plated steel folding handle.
  • Includes heavy-duty latch with lockable hasp.
No. 903
No. 903 3" Universal Iron Tray
  • Holds Crain 3 inch irons.
  • Holds other popular 3 inch irons.
  • Spring clips are riveted to the tray for durability.
  • Durable all-steel construction with angled clips for hands-free reinsertion of the iron.
No. 905
No. 905 Heat Bond Iron
  • Ultra-low profile and narrow handle make it easier to bring the seam together.
  • Dual indicator lights show power-on and heating status.
  • Rotating 12’ HSJO cord assembly with flexible strain relief improves cord life.
  • Base includes non-stick coating. Includes durable riveted iron tray.
No. 906
No. 906 Heat Bond Iron Kit
  • Includes No. 905 iron, 25 foot extension cord, and steel case.
  • Case holds the iron plus a spare roll of seam tape.
  • Case is made with a durable, smooth-acting piano-style hinge.
  • Case is made with a plated steel handle and lockable hasp for security.
No. 910
No. 910 Sharpening Stone
  • Works well for resharpening curved carpet and vinyl knives.
  • Medium Crystolon silicon carbide grit.
  • Sized 1 1/4" wide by 10" long x 3/4" thick.
  • No handle is included with this stone.
No. 912
No. 912 12” x 8” Steel Square
  • An 8” x 12” steel square that’s useful for patterned vinyl flooring layout work.
  • Legs include rulers on front and back marked in 1/16” graduations.
  • Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
  • Dimensions - body: 12" long x 1 1/2" wide, tongue: 8" long x 1" wide.
No. 915
No. 915 24” x 16” Steel Square
  • 24” x 16” steel square that’s useful for patterned vinyl flooring layout work.
  • Legs include rulers on front and back marked in 1/8” graduations.
  • Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
  • Dimensions - body: 24" long x 2" wide, tongue: 16" long x 1 1/2".
No. 930
No. 930 Laminated Sharpening Stone
  • Works well for resharpening curved carpet and vinyl knives with resharpenable blades.
  • Made from Crystolon silicon carbide.
  • Grit is coarse on one side, fine on the other.
  • Stone size: 1 1/4" wide by 10" long x 3/4" thick. Handle length: 4 3/4" long.
    Handle diameter: 1 1/8" dia.
No. 945
No. 945 Electronic Heat Bond Iron
  • Precision electronic thermostat maintains set temperatures +/- 15°F ranging from 240 to 420°F.
  • Provides consistent heat and uniform melting.
  • Ultra-low profile base makes it easier to bring the seam together.
  • Rotating 12 ft. HSJO cord with flexible strain relief extending cord out of the seam area.
No. 946
No. 946 Electronic Iron Kit
  • Includes No. 945 Electronic Heat Bond Iron, 25 foot extension cord, and steel case.
  • Case holds the iron plus a spare roll of seam tape.
  • Case is made with a durable, smooth-acting piano-style hinge.
  • Case is made with a plated steel handle and lockable hasp for security.
No. 950
No. 950 Professional Installers Tool Kit
  • Provides basic tools of carpet installation, including:
  • 24” tool box, knee kicker, wall trimmer, cushion back cutter
  • strip cutter, tool pouch, chalk line & chalk, seam sealer bottle
  • razor & utility knives, molding lifter, hammer, stair tool, and
    nap shears.
No. 955
No. 955 Pull Hand Groover
  • Cuts a U-shaped groove at the seam line for welding using a pulling action.
  • Makes starter grooves for a power groover. Grooves in tight areas and places floors aren’t level.
  • Adjustable fin tracks in the seam line and controls grooving depth, permitting faster work.
  • Comes with 3 blades, one pre-loaded in the tool, and two stored in the handle.
No. 956
No. 956 Pull Hand Groover Blades (3)
  • Pack of three U-shaped replacement blades for the Crain No. 955 Pull Hand Groover.
  • Precision formed from high carbon steel, heat treated, and hand sharpened.
  • Locator hole above screw hole keeps blade rigidly in place on Crain No. 955 groover.
  • Standard shape fits other popular hand groovers.
No. 961
No. 961 Triangular Welding Tip
  • Triangular speed welding tip for the Crain No. 960 Heat Weld Gun.
  • For use with triangular or “half moon” welding rod.
  • Air outlet is precisely formed to focus hot air over the seam area.
  • Standard sized inlet diameter fits the pencil tip nozzle outlet of popular heat weld guns.
No. 962
No. 962 Round Welding Tip
  • Round speed welding tip for the Crain No. 960 Heat Weld Gun.
  • For use with round 4 mm welding rod.
  • Air outlet is precisely formed to focus hot air over the seam area.
  • Standard sized inlet diameter fits the pencil tip nozzle outlet of most other popular heat weld guns.
No. 963
No. 963 Pencil-Tip Nozzle
  • Adapts our No. 960 Heat Weld Gun to our No. 961 Triangular or No. 962 Round Welding Tips.
  • Angled outlet is convenient for holding the heat gun and keeping the speed tip on the rod.
  • Useful in areas where speed tips can’t go such as coved areas.
  • Standard diameter inlet and outlet outlet fits most popular heat weld guns and speed tips.
No. 965
No. 965 Skiving Knife w/Blade
  • Trims excess heat welding rod at the seam without gouging high spots.
  • Includes sharp, flexible blade that is replaceable and built-in pivoting trim guide.
  • On first pass, trim with guide under the blade, then pivot guide out and trim second pass.
  • Eliminates difficult resharpening of quarter moon knives and gouging high spots.
No. 966
No. 966 Skiving Knife Repl. Blade
  • One each replacement blade for the No. 965 Skiving Knife.
  • Blade is flexible to eliminate gouging of high spots.
  • Blade is replaceable to eliminate difficult resharpening of quarter moon knives.
  • Used for trimming excess heat welding rod at the seam areas.
No. 967
No. 967 Skiving Knife Repl. Blades (5)
  • Pack of five replacement blades for the No. 965 Skiving Knife.
  • Blades are flexible to eliminate gouging of high spots.
  • Blades are replaceable to eliminate difficult resharpening of quarter moon knives.
  • Used for trimming excess heat welding rod at the seam areas.
968
No. 968 Floor Following Groover
  • Cuts a groove of consistent depth for heat welding solid vinyl flooring.
  • Maintains consistent grooving depth when floors aren’t level up to 1/4" variation over 1 foot of seamline.
  • Spring-loaded floor following dust shroud improves dust control.
  • Includes 12 tooth 130mm carbide-tipped blade (No. 971) and case. Diamond grit blade sold separately (No. 972).
No. 969
No. 969 Heat Weld Gun
  • Comes with a Leister Triac ST heat gun for consistent and reliable heat output.
  • A single dial on the back of the heat gun controls temperature from 104° - 1290°F.
  • Standard 1 1/4” air outlet fits a wide variety of nozzles.
  • Comes with pencil tip nozzle, triangular welding tip, round welding tip, and carrying case.
No. 971
No. 971 12 Tooth Carbide Blade
  • Replacement carbide tipped blade for the Crain No. 970 Power Groover.
  • 12 tooth 130 mm blade works on other groovers that take this size blade.
  • Cuts a trapezoidal shaped groove in the material. Blade is resharpenable.
  • Not for use on metal impregnated safety floors (see No. 972 Diamond Groover Blade).
No. 972
No. 972 Diamond Groover Blade
  • Heavy grit diamond abrasive blade for the Crain No. 970 Power Groover.
  • Use on metal impregnated safety floors only. Makes an approx. 3.4 mm wide groove.
  • Continuous rim diamond grit brazed on the entire outside diameter.
  • 130 mm diameter works on other groovers that take this sized blade.
No. 979
No. 979 Universal Welding Tip
  • Versatile tip works with 3 mm round, 5 mm round, half-moon, or triangular welding rod.
  • Adjusting screw at the rod inlet adapts the inlet to the various rod shapes.
  • Grooved brass pressure roller is also adaptable to the various rod shapes.
  • Hot air inlet is sized to fit the Crain No. 960 or No. 980 Heat Weld Guns, and other popular models.
No. 984
No. 984 Hand Groover Repl. Blades (10)
  • Pack of ten replacement blades for the No. 983 Hand Groover.
  • Blades form a U-shaped groove at the seamline for welding.
  • Blades have U-shaped edges ground on two sides.
  • Blades come in a plastic box with a lid that snaps shut for storage.
No. 985
No. 985 Quarter Moon Knife
  • Trims excess welding rod from the seam area after cooling making it flush with the floor.
  • Used in a two-step trimming process with the No. 986 Trim Guide.
  • Use the trim guide under the blade on first pass, then remove the trim guide on second pass.
  • Knife is resharpenable and comes with protective pouch.
No. 986
No. 986 Trim Guide
  • Depth control guide for the No. 985 Quarter Moon Knife.
  • Used with the knife to trim excess welding rod in a two-step process.
  • Insert guide under the knife to remove the bulk of the material on a first pass.
  • Remove guide on second pass and the knife trims the remaining excess flush to surrounding floor.
No. 987
No. 987 Pressure Roller
  • Used for welding areas where a speed tip does not work well such coved areas.
  • Welding rod is threaded through the hollow handle and put under the roller.
  • Roller has a grove for guiding and pressure the welding rod into the seam.
  • As the roller presses and holds the rod, a heat gun with pencil-tip nozzle welds it.
No. 988
No. 988 Vinyl Welding Kit
  • A kit of the basic tools needed for vinyl welding at a great price!
  • Includes: Leister Triac ST heat gun, pencil tip nozzle, triangular tip and round tip.
  • Also includes: power groover, pull hand groover, skiving knife, selvage trimmer, recess scriber, hook handle utility knife, and cleaning brushes.
  • Includes metal carrying case that holds all the tools.
No. 995
No. 995 Deluxe 1000° Heat Gun w/Case
  • Flameless electric heat gun producing hot air up to 1000°F for softening, forming and cutting sheet vinyl and VCT.
  • Adjustable intake cover adjusts temperature from 750°F - 1000°F. Fan output is 27 CFM.
  • 3 way switch switches between off, cold, or hot. Cold used to properly cool element.
  • Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
No. 996X
No. 996X Hook Blades (15)
  • Pack of 15 high-quality German-made hook blades. Hook shape good for cutting over concrete.
  • Very good for following score lines on linoleum and making long rough cuts in sheet vinyl.
  • The blades come in a plastic box with a hinged lid that snaps closed for storage.
  • Usable with most utility knives and Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.
No. 997
No. 997 Personna® Deep Hook Blades (10)
  • Pack of 10 Personna® deep hook blades. These blades can be used in most utility knives.
  • Hook blades keep the cutting edge off the floor when cutting concrete.
  • Hook blades also good for following score lines in linoleum and making long rough cuts in sheet vinyl.
  • Blade dim.: length: 2.0", width: .75", thickness: .025". Use in Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.

Pages