Cuts 12” tile straight. Includes two guides for repeat cuts.
Highly accurate for precisely matching edges. Straightness of cut: +/-.005”.
With floor guide against last field tile, and tile against wall, cuts amount needed.
Also includes fast-acting blade height adjustment knobs, and carrying case.
Carrying case for Crain No. 001 Model “A” Tile Cutter.
Streamlined, easy-to-carry design also saves space.
Custom-formed interior protects the cutter in transit.
Features durable metal latches and recessed handle. Includes case only.
Specialized sheetgoods knife with unique blade carrier for mounting blades at different angles.
Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
Takes Crain No. 012 (Gundlach No. 12-WB) Standard or No. 013 (Gundlach No. 13-WB) Heavy Blades.
Takes Crain No. 026A Airway Hook Blades (Gundlach No. 26-AB) with blade screw passing through square hole.
Gundlach No. 6 Airway Knife uses specialty blades for vinyl. Comes with a No. 025A straight blade.
Takes Crain No. 025A (Gundlach No. 25-AB Straight) or No. 026A (Gundlach No. Hook) blades.
Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
Body has long, angled blade holder and finger contours to enhance grip. Opens for blade storage.
Cuts up to 18 inch vinyl tiles straight, or 12 inch tiles diagonally.
Steel reinforced blade carrier and large, rigid base ensure straight, accurate cuts.
Includes straight guide, diagonal guide, and self-measuring floor guide.
With floor guide against last field tile, and tile against wall, cuts amount needed.
Pack of 12 Standard Blades (Gundlach No. 12-WB) for No. 005 Ward Handle (Gundlach No. 5).
Specialized sheetgoods installation blades with regular profile compared to No. 013 Heavy Blade.
Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
Packaged in a plastic tube with resealable lid for storage.
Pack of 12 Heavy Blades (Gundlach No. 13-WB) for No. 005 Ward Handle (Gundlach No. 5).
Specialized sheetgoods installation blades with regular profile compared to No. 013 Heavy Blade.
Blades mountable at steep angles for stiff commercial vinyls and thick linoleum, or less steep for regular materials.
Packaged in a plastic tube with resealable lid for storage.
18” long dollies for moving and unrolling up to 16” rolls of vinyl on the jobsite.
Three 18” long heavy gauge tubular steel rollers mounted on double ball bearings to form a rolling bed.
Simply pull on the sheet and the material feeds off the roll.
Four non-marking rubber wheels are mounted on the sturdy cast aluminum end frames.
36” long dollies for moving and unrolling up to 16” rolls of vinyl on the jobsite.
Three 36” long heavy gauge tubular steel rollers mounted on double ball bearings to form a rolling bed.
Simply pull on the sheet and the material feeds off the roll.
Four non-marking rubber wheels are mounted on the sturdy cast aluminum end frames.
Pair of heavy-duty furniture or appliance moving dollies adjustable in length from 24” – 32”.
Each dolly has two 8” x 10” load pads and 4 pivoting casters. Total 16 soft urethane casters.
Loads are easily moved or change direction. Maximum capacity: 1000 lbs.
Welded steel load plates and telescoping tubes. Soft urethane casters won’t scratch most floors.
11” x 16” dolly for moving heavy boxes of VCT and other tile around the jobsite.
Rolls and turns with up to 5 boxes of VCT on its deck or approximately 300 lbs. of material.
Includes 5 swiveling casters including one in the middle to help it turn and rotate.
Casters have hardened steel brackets and soft urethane rollers that don’t scratch on most floors.
Lightweight 24” toolbox made from durable structural foam materials.
Pull along while walking using long, top mounted pull handle.
Inner tray has angled recesses allowing steam from the carpet seam to escape.
Includes folding handle, side handles, 3 steel latches, and central hasp to lock.
Vial of 12 Gundlach No. 25-AB Straight Blades for the Gundlach No. 6 Airway Knife (Crain No. 006).
Specialty blades for vinyl installation.
Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
Packaged in a clear plastic vial with a re-sealable plastic lid for storage.
Vial of 12 Gundlach No. 25-AB Hook Blades for the Gundlach No. 6 Airway Knife (Crain No. 006).
Specialty blades for vinyl installation.
Blades have square cutout that fits on a square boss in the knife to eliminate blade wobble.
Packaged in a clear plastic vial with a re-sealable plastic lid for storage.
3” wide spreader for spreading base adhesive across the back of 4” wide vinyl or rubber cove base.
1 /8 ” x 1 /8 ” V-shaped notches typically right size for base adhesive (check mfg. recommendation).Blade is made from brushed spring steel with the right amount of flex for spreading adhesive.
Blade is riveted to a wide contoured plastic handle.
4” wide spreader for spreading base adhesive across the back of 6” wide vinyl or rubber cove base.
1 /8 ” x 1 /8 ” V-shaped notches typically right size for base adhesive (check mfg. recommendation).Blade is made from brushed spring steel with the right amount of flex for spreading adhesive.
Blade is riveted to a wide contoured plastic handle.
Top quality 3” wide spreader used for spreading base adhesive on the back of 4” wide cove base.
Features polished stainless steel blade and attractive lacquered wood handle.
1 /8 ” x 1 /8 ” V-shaped notches typically the right size for this adhesive (check mfg. recommendation).Blade has just the right amount of flex for spreading adhesive.
Top quality 4” wide spreader used for spreading base adhesive on the back of 6” wide cove base.
Features polished stainless steel blade and attractive lacquered wood handle.
1 /8 ” x 1 /8 ” V-shaped notches typically the right size for this adhesive (check mfg. recommendation).Blade has just the right amount of flex for spreading adhesive.
Replacement carbide wheel for the Crain No. 045 Super Quarry Tile Cutter only.
Dimensions: 7 /8 ” diameter x .080” thick.
Center hole: .260” diameter
No fasteners are included with this carbide wheel. This wheel will not fit other Crain tile cutters.
Specialty linoleum knife with 2 1 /2 ” deep hook blade made from high carbon steel.
Permanent riveted handle and knife combination.
Wood handle is contoured for enhanced grip and has a dark varnished finish.
This is the Dexter No. X752 1 /2 (EDP No. 52140) Linoleum Knife.
Specialty vinyl knife with 2 1 /2 ” deep hook blade made from high carbon steel.
Permanent riveted handle and knife combination.
Wood handle is contoured for enhanced grip and has a dark varnished finish.
This is the Dexter No. VX752 1 /2 (EDP No. 52160) Vinyl Knife.
The Dexter No. 7 Custom Handle is one of the best available knives for vinyl installation.
Angled blade holder puts blade at an optimal angle, and keeps knuckles off the floor.
Body has the classic Dexter contour, and pivots open for blade storage by removing end cap.
Takes standard utility and hook blades.
Protective case with wheels holds 75 or 100 lb. rollers.
Eliminates hand carrying of the roller.
Eliminates picking up debris on the roller sections.
Includes large handles on top for lifting when necessary, and durable metal latches.
75 lb. roller with all-steel frame and zinc-plated roller sections for durability.
Smooth, radiused roller sections reduce scratching and indentation.
Outer sections have recesses for fasteners to prevent wall damage.
Case with wheels for transport eliminates hand-carrying and picking up debris on sections.
100 lb. roller with all-steel frame and zinc-plated roller sections for durability.
Smooth, radiused roller sections reduce scratching and indentation.
Outer sections have recesses for fasteners to prevent wall damage.
Case with wheels for transport eliminates hand-carrying and picking up debris on sections.
Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
Oval head seats in metal moldings with countersunk holes.
Semi-square body compresses against pre-drilled 1 /8 ” hole.
Fastener dim.: 1 /8 ” dia. X 7 /8 ” long. Hole: 1 /8 ” dia. x 7 /8 ” deep.
Irwin® STRAIT-LINE® standard white marking chalk for marking out cuts of carpet.
Leaves a temporary mark with high visibility.
Cap includes a folding extended nozzle for fast, precise refills.
Includes 8 oz. of chalk per bottle.
Irwin® STRAIT-LINE® standard blue marking chalk for marking out cuts of carpet.
Leaves a temporary mark with high visibility.
Cap includes a folding extended nozzle for fast, precise refills.
Includes 8 oz. of chalk per bottle.
Hacksaw blade made by bonding carbide to a 10” steel rod.
In a hacksaw, these blades can cut curves and straight lines in ceramic tile, brick, or marble.
Works in tight areas, and cuts equally well on both outward and inward strokes of the saw.
Hacksaw not included.
Irwin® STRAIT-LINE® standard white marking chalk for marking out cuts of carpet.
Leaves a temporary mark with high visibility.
Cap includes a folding extended nozzle for fast, precise refills.
Includes 5 lbs. of chalk per jug.
Resharpenable knife with long hook edge, deep hook edge, and contoured wood handle.
Long hook edge has sharp point for precision cuts, particularly to follow a scored line.
Deep hook edge works well for long rough cuts in sheetgoods.
Edges are extremely sharp, stay sharp longer, and are easily resharpenable.
Resharpenable 3” blade with greater thickness for rigidity and durability.
Gentle hook forms a sharp point at the end that does the cutting.
Superior German steel alloy holds its edge after resharpening long after others have dulled.
Wood handle is contoured for comfortable grip.
Used for miscellaneous pattern layout scribing for sheet vinyl installation.
Also used for marking score lines on vinyl tile.
5 ¾” long handle has precision chuck and screw-on cap for holding replaceable needles.
Takes standard Crain No. 129 Scriber Needles.
Kit for scribing inside corners includes cove scriber, cove template, and pin vise.
Cove scriber scribes lines on the felt for positioning the cove template.
Cove template scribes the inside cove pattern onto the vinyl.
Cove scriber also scribes a top edge on the vinyl to fit the cap metal. Repl. needles: No. 129
Versatile 6” bar scriber works both as a wall scriber and seam scriber.
Includes rounded end guide for wall scribing and bottom guide for seam scribing.
The 6” bar provides approximately 5” of length adjustment using the steel thumbscrew.
Needle adjusts to material thickness using a screw in the bar (Repl. needle: No. 129).
Versatile 8” bar scriber works both as a wall scriber and seam scriber.
Includes rounded end guide for wall scribing and bottom guide for seam scribing.
Housing has a hole in the bottom for a second needle for circles or feature strips.
8” bar for approx. 6” of length adjustment. Needle adjusts to material thickness. (Repl. needle: No. 129)
Six foot steel carpet straight edge.
Precision ground for straightness ± .005".
Provides the accuracy necessary to prepare carpet seam edges.
Includes 45° angle on one end and hanging hole.
Four foot steel carpet straight edge.
Precision ground for straightness ± .005".
Provides the accuracy necessary to prepare carpet seam edges.
Includes 45° angle on one end and hanging hole.
18” long flexible steel straight edge.
Bends easily, but returns to its original flat condition.
Includes a 45° angle on one end, and a hanging hole on the opposite end.
Finished with bright red paint. Dimensions: 18" long x 2" wide x 1 /32 " thick.
32” long flexible steel straight edge.
Bends easily, but returns to its original flat condition.
Includes a 45° angle on one end, and a hanging hole on the opposite end.
Finished with bright red paint. Dimensions: 32" long x 2" wide x /32 " thick.
Pack of four replacement blades for the Crain No. 174 Instant Repair Tool.
When used in the tool, they cut circular holes in carpet for repairs.
Four blades included in the pack can replace all four blades in the tool if desired.
Blade dimensions: length: 1.035", width: .50", thickness: .020".
39” long flexible steel straight edge.
Bends easily, but returns to its original flat condition.
Includes a 45° angle on one end, and a hanging hole on the opposite end.
Finished with bright red paint. Dimensions: 39" long x 2" wide x /32 " thick.
Includes both a serpent edge on one side and a straight edge on the other.
Serpent edge produces less visible seams on “sculptured” pattern carpet.
Straight edge is precision ground +/-.005” for cutting carpet seam edges from the back.
Made from 75” long 1 /8 ” thick galvanized steel.
Includes both a serpent edge on one side and a straight edge on the other.
Serpent edge produces less visible seams on “sculptured” pattern carpet.
Straight edge is precision ground +/-.005” for cutting carpet seam edges from the back.
Made from 36” long 1 /8 ” thick galvanized steel.
Tubular steel frame includes full-sized 20” wide x 60” long bed.
Handles rolls up to 1,000 lbs. 60” length supports long rolls.
Includes four steel eyelets for tying down the load and reinforcing center plates.
16” pneumatic tubed tires are tall and wide enough to roll over gravel or up curbs.
Irwin® aluminum chalk line features durable aluminum housing and a steel rewind handle.
The polyester line delivers 5 - 6 strikes per pull. Holds approx. 2 oz. of chalk.
Handle locks the line for use as plumb bob.
Line length: 100 feet.
Prying lip is ultra-thin to get underneath the staples.
Pivoting upper jaw activates automatically to hold the staple against the prying lip.
Large leverage handle is ergonomically contoured.
Highly effective for removing staples, especially pad staples.
For use in Crain No. 194 Outside Corner Scriber ONLY.
Dimensions: .058" outside diameter and 9 /16 " length with sharp point.
Made from high carbon steel for long useful life.
Packaged 50 needles per container in a durable plastic box with lid that snaps shut.
Pack of 50 replacement needles used in most Crain dividers and scribers.
Not for use in Crain No. 194 Outside Corner Scriber.
Dimensions: .063" in diameter, 7 /8 " In length, and have a sharp point for scribing.
Use in these Crain tools: Nos. 109, 110, 111, 112, 188, 240, 355, 380, 382
Popular and proven Rapid® design has only four moving parts to minimize jams.
Clearing jams is easy by releasing a quick-access pin to remove magazine and expose staple channel.
Uses Crain No. 141C 3 /8 " leg chisel point or No. 142D 3 /8 " leg divergent point staples.
Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
High speed 3X rewind handle for fast retrieval of line.
Metal rewind handle can also activate a clutch to release line without spinning.
Refills by inserting chalk bottle nozzle into the “Big Mouth” grommet.
100 ft. twisted synthetic line. Chalk capacity: 3 oz.
For use in our No. 130 Rapid® Staple Hammer.
Points are ground to a chisel point.
Dimensions: 3 /8 " leg and 3 /8 " crown. Packaged 5000 staples per box.
Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
For use in our No. 130 Rapid® Staple Hammer.
Points are ground to a divergent point.
Dimensions: 3 /8 " leg and 3 /8 " crown. Packaged 5000 staples per box.
Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
Large capacity 2 oz. syringe with 2” long 13 gauge needle.
Used for repairing bubbles in glued down carpet or vinyl, NOT for hardwood repairs.
For use with liquid adhesive such as latex, NOT thick hardwood adhesive.
Sale prohibited in: CT, MD, NJ, DE, MA, NY, ME, NH, RI
Multi-purpose seam sealer bottle for residential stretch-in or commercial jobs.
Plastic applicator includes a lip that hooks on the carpet on residential jobs.
Instructions on the bottle explain how cut off lip for commercial jobs.
Holds 8 oz. of sealer, but is a bottle only and does not include sealer.
Rapid® Classic 1 design with an added steel guide to adjust the throat opening from 1 /8 ” to 13 /16 ”.
With guide adjusted, it staples at a constant distance from the edge of the carpet.
Guide is very helpful for edge binding of carpets. Uses Crain No. 148 5 /16 ” Staples.
Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
For use in our No. 147 Rapid® Edge Binding Stapler.
Dimensions: 5 /16 " leg and 1 /2 " crown.
Packaged 5000 staples per box.
Rapid® is a registered trademark of Isaberg Rapid® AB Sweden.
Folds square for stretching off outside corners.
Put legs at a 135° angle and lock the pivot for stretching off a post.
In the flat position, the tail spans 20 inches.
Rubber pads help it stay put under load. Wheels help it move fast after the stretch.
Driving head only of our fixed head stretcher.
Push button stretch lock is located conveniently on the handle.
Visual pin depth adjustment knob located conveniently on the head.
No screws or screwdrivers are needed to adjust the pin depth.
20 oz. rubber mallet with while solid rubber head and hardwood handle.
Use to tape down metal moldings without scuffing, denting or scratching.
Head has two large hammering surfaces that spread the force of impact.
Works well with stair tools to prevent glancing and deflection.
Driving head only for our swivel head stretcher.
Swivel head provides swivel 60° of free swivel for patterned carpet.
Built-in lock pin locks the swivel head in five helpful positions.
Push-button conveniently located on the handle for partial stretches.
Tucks carpet into the corner of stair treads, or at the wall between the base and the tack strip.
Tool is a full four inches wide to tuck more carpet with each hammer blow.
Soft cushion grip absorbs vibration and is textured for grip.
Outer edges are angled back to prevent wall contact and tuck all the way into a corner.
Tucks carpet into the corner of stair treads, or at the wall between the base and the tack strip.
Blade is only 2 7 /8 ” wide to deliver more concentrated force when malleted.
Outer edges are angled back to prevent wall contact and tuck all the way into a corner.
Forged from an impact-resistant steel alloy, and nickel-plated.
Bent blade of this stair tool can tuck carpet beneath a toe space.
Also helpful for tucking carpet underneath Z-bar and under heat registers.
Blade is only 2 7 /8 ” wide to deliver more concentrated force when malleted.
Forged from an impact-resistant steel alloy, and nickel-plated.
Steel pry bar gets behind wood base and moldings to pry them off with minimum damage.
Both ends have slim, wide profile prying surfaces that are polished smooth for safe insertion.
Both ends have sharp, beveled nail slots for removing nails and brads with small heads and staples.
Made from forged and hardened steel and nickel plated.
Vaughan 15” Superbar is the classic heavy-duty pry bar.
Includes “shepherd’s crook” rocker end for prying power, and flat end for getting under nails.
Includes three beveled nail slots.
Both ends polished for insertion behind moldings and base.
Used to press and hold carpet in the gully as the stretch is released.
Causes pins to set better in the carpet’s backing and tucks the carpet.
Flexible blade works as 1 /16 inch x 1 /16 inch “U” notch trowel.
Ergonomic blue plastic handle.
Used to press and hold the carpet in the gully as the stretch is released.
Causes pins to set better in the carpet’s backing and tucks the carpet.
Blade has no notches for better performance as a tucking tool.
Thicker 16 gauge plated steel will not bend under load.
Long nose hammering tool extends beneath toe-kicks to drive tack strip nails.
Hammering tip is magnetized to hold a nail in position.
Forged alloy steel body with bonded rubber-like handle.
Rubber-like handle reduces impact vibration transmitting to hand and wrist.
Precision magnetic tip positions and drives nails into difficult areas.
Good for fastening tack strip to concrete using hard to hold stubby nails.
Saves fingers from being hammered.
Made with a 5 ½” long stainless steel body and a powerful magnetic insert.
Cuts a three inch diameter circle for removing stained areas from a carpet.
Uses four blades to cut the carpet cleanly.
Sharp central pivot pin is spring-loaded to adjust automatically to different thicknesses of carpet.
Includes plastic cap to protect the body and pin in storage.
Multi-purpose steel blade can tuck carpet near fragile tiles or toilets.
Blade also includes a sharp hook edge for heavy cutting, and front edge for scraping.
Front edge includes a notch for removing door pins.
Durable aluminum body with steel tapping end. Blades are replaceable: Order No. 177.
Compact miter box includes straight and 45° angles needed by flooring installers and saves space in the tool box.
Steel guides are highly accurate and case-hardened to resist wear even when used with hacksaw.
Wood base allows clean cuts through aluminum trims without dulling the hacksaw blade.
Base includes synthetic rubber non-slip pad that helps the tool stay put and won’t mark most surfaces.
Made with a powerful torsion spring and two grippers oriented inwardly to pull seams together.
Helpful on glue-down carpet installations to pull and hold seams together.
Inward pulling force can be controlled with the amount of hand pressure.
Spring arms are vinyl-coated for comfort. Nap grips are replaceable. Sold in set of two.
Includes a pack of 12 carpet trimmer blades. For use in popular carpet wall trimmers.
Blades are bevel ground on the top surface only. Install in the trimmer with bevel side up.
Prevents trimmer from rising in the cut, resulting in an accurate height of cut and easier tucking.
Blades come in a plastic box with hinged lid that snaps closed for storage.
Includes a pack of 100 Personna® carpet trimmer blades. For use in popular carpet wall trimmers.
Blades are bevel ground on the top surface only. Install in the trimmer with bevel side up.
Prevents trimmer from rising in the cut, resulting in an accurate height of cut and easier tucking.
Blades are individually wrapped in paper and come in a laminated paper box.
Offset handles easily held parallel with the floor for trimming carpet tufts.
Duckbill rides on top of the carpet to position the top blade.
Finger loops are oversized. Right side loop accommodates two fingers for ease of use.
Handles are vinyl-coated for ease of grip.
Highly accurate seam scriber that provides ease of adjustment and good grip and control.
Offset distance from the guide to the needle adjusts using a precision thumbwheel.
Hinged base folds for easy insertion of the tool at the overlapped seam.
Needle height is adjustable. Replacement needles: No. 129
Utility and hook blade knife with multiple added contours for improved grip.
Wide contoured midsection transitions to a narrow rear hook in proportion to the palm and fingers.
Rear hook gives the little finger improved advantage for greater pulling power.
Body pivots open for fast access to replacement blades by loosening the folding thumbscrew.
Offset handles easily held parallel with the floor for trimming carpet tufts.
Duckbill rides on top of the carpet to position the top blade.
Smaller one inch loops for precision control.
Handles are vinyl-coated for ease of grip.
Insert the point into the back of the Z-bar, then run it down the length.
Angled leg offsets the handle from the carpet to prevent knuckles from rubbing on the carpet.
Also useful for light carpet stretching in tight areas.
Sharp, high carbon steel point, with rounded hard plastic handle.
Outside corner scriber for outside cove vinyl corners. Works also on rubber and vinyl base.
Scribes a line on the side of the corner that remains to be trimmed.
Uses the previously trimmed side as a guide using a guide leg with rounded end.
Adjustable for various material thicknesses. Replacement needles: No. 128
Sharp, high-carbon steel point penetrates the carpet’s backing for lifting it off the tack strip.
Also helpful for light carpet stretching in tight areas.
Point has opposite flat steel head seated in the hard plastic handle for hammering.
Rounded handle fits the palm comfortably.
Extra thick polyurethane skin for increased durability.
Polyurethane skin helps prevent build-up of sharp items like splinters that can scratch floors.
Designed for floor installers, these pads provide protection for kneeling and knee kicking.
Made from flexible neoprene. Machine-washable. Inner knee pad is replaceable.
Provides protection for both kneeling and knee kicking, so they stay on at all times.
Extra wide straps don’t pinch even when wearing shorts.
Contour conforms with the knee whether walking, kneeling or kicking.
Made from flexible yet durable neoprene that’s machine-washable. Inner pad is replaceable.
Genuine sponge-rubber knee pads.
½” wide straps include fast and durable hinge-activated buckles.
To fasten, insert the angled end of the strap and press the lever down.
Buckles hold tight with no carpet fuzz hassle like with hook and loop fasteners.
Polyurethane skin prevents build-up of sharp items such as splinters that scratch floors.
Polyurethane is also highly resistant to tearing and penetration, providing extra durability.
Designed for floor installers, these pads provide protection for kneeling and knee kicking.
Made from flexible neoprene. Machine-washable. Inner knee pad is replaceable.
Genuine sponge-rubber knee pads.
The ½” thick rubber provides good comfort and durability.
Elastic straps are 1 ½” wide to reduce pinching.
Straps include fast-acting hook and loop fasteners.
10 inch long glue sticks with standard 7 /16 ” diameter (approx.).
They come in a resealable heavy-duty clear plastic bag for storage.
Each bag includes one pound of glue or 19 sticks.
For use in Crain Nos. 203, 204 or 207 Glue Guns. CAUTION: Melted glue temp. up to 400°F.
4 inch long glue sticks with standard 7 /16 ” diameter (approx.).
They come in a resealable heavy-duty clear plastic bag for storage.
Each bag includes 8 oz. of glue or 24 sticks.
For use in Crain Nos. 203, 204 or 207 Glue Guns. CAUTION: Melted glue temp. up to 400°F.
80 watt UL listed glue gun.
Comes with Crain No. 629 1 /8 ” Nozzle with small diameter extension tube.
1 /8 ” nozzle is helpful for precision carpet seam edge sealing.Also comes with standard nozzle. Works with standard 7 /16 ” diameter glue sticks.
100 watt glue gun with a carpet edge sealing tip (No. 627) and conventional 1/8” nozzle (No. 629).
Carpet edge sealing tip works at an upright handle that allows a convenient pulling motion.
Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
Ultra-thick padding for greater kneeling comfort.
Tough leather wear surface minimizes build-up of sharp objects that can scratch floors.
Padding is riveted to the leather.
Durable wide straps with steel buckles.
High powered 220W gun quickly melts glue sticks for high output applications.
Use for gluing tack strip and other accessory trims to concrete with acrylic glue sticks.
Gun has variable temperature control from 284°F - 428°F and comes with carrying case.
Takes standard 7/16" diameter glue sticks (Crain No. 201 10" regular, No. 202 4" regular, or No. 208 10" acrylic).
Quickly bond tack strip, wood, metal trims and vinyl moldings to concrete, tile, stone or wood floors.
A fast alternative to aluminum drives or contact cement, they set up after 60 – 80 seconds.
Includes 19 each 10” long sticks (1 lb. of adhesive) in a self-closing bag for storage.
Sticks are standard 7 /16 ” diameter for use in a wide variety of glue guns.
Provides more time to position materials (approx. 3 minutes).
Helpful to position starter boards in hardwood installation.
Helpful to position long trim pieces.
10” long sticks, standard 7/16" diameter. Comes 20 sticks (1 lb.) per resealable bag.
Slotted razor blade carpet knife with multiple added contours for improved grip.
Wide contoured mid-section transitions to a narrow rear hook in proportion to palm and fingers.
Rear hook gives the little finger improved advantage for greater pulling power.
Body pivots open by loosening the folding thumbscrew for fast access to blades.
1 /8 ” solid carbide drill bit with two usable ends.Makes a 1 /8 ” hole in concrete for fastening aluminum drives.
Requires Crain No. 225 1 /8 ” Hexagon Adaptor for the drill chuck.
Drill RPM must be maintained between 1700 to 3500 RPM.
3 /16 ” solid carbide drill bit with two usable ends.Makes a 3 /16 ” hole in concrete for fastening aluminum drives.
Requires Crain No. 226 3 /16 ” Hexagon Adaptor for the drill chuck.
Drill RPM must be maintained between 1700 to 3500 RPM.
Adapts 1 /8 ” solid carbide drill bits to a standard electric drill chuck.
Works with Crain No. 223 1 /8 ” Solid Carbide Drill Bits.
Shank diameter is 1 /4 ”.
Internal collet tightens down on the drill bit to hold it in the adaptor.
Adapts 3 /16 ” solid carbide drill bits to a standard electric drill chuck.
Works with Crain No. 224 3 /16 ” Solid Carbide Drill Bits.
Shank diameter is 1 /4 ”.
Internal collet tightens down on the drill bit to hold it in the adaptor.
Heavy-duty scraper with 66” long solid steel body.
Provides the weight needed to force through and scrape up glued-down flooring materials.
Beveled blade carrier deflects material build-up. Case hardened to reduce bending.
Includes replaceable 2” wide high carbon steel blade that holds an edge and withstands impact.
Heavy-duty two inch wide blade for use in the No. 230 Deluxe Floor Scraper.
Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
Includes one each blade only.
Wider three inch blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material.
Made from .090” thick high carbon steel to hold its edge and withstand repeated impact.
Tough enough to force through glued-down flooring, and sharp enough to scrape up adhesive residue.
Includes one each blade only.
Inexpensive, 6” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
Evenly spreads 5 beads of adhesive for optimal application onto 6” wide cove base.
5 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
Inexpensive, 3” disposable cove nozzle fits the applicator tip of common base adhesive cartridges.
Evenly spreads three beads of adhesive for optimal application onto 3” wide cove base.
3 holes spaced to maximize adhesion and minimize overflow. Hole diameters sized for equal output.
End flange fits behind the nozzle slot of most guns to prevent nozzle from coming off.
Uses standard quart cove base adhesive cartridges.
Smooth pushrod delivers continuous feed and pressure. Releases using easy-access thumb lever.
Handy cartridge tip cutter is built in to the handle.
Riveted 5 ½” seal puncture needle pivots out from the body to break the cartridge seal.
Uses standard 1 /10 gallon cove base adhesive cartridges.
Smooth pushrod delivers continuous feed and pressure.
Rod pressure is released for reloading or for stopping the flow using easy-access thumb lever.
Durable and economical all-steel construction.
Trims excess carpet at the wall leaving right amount for tucking.
Deluxe trimmer has top-loading blade carriers for fast blade changes.
Wide throat area results in smooth flow of carpet to the blades.
Six shims for height adjustment and four throat adjustments for various carpets.
Trims excess carpet at the wall, leaving just the right amount for tucking.
To change blades, remove the blade carrier.
Blades are easily accessible from the top of the blade carrier.
Shims are relieved for easy reinsertion of the blade carrier, and each has four sockets for throat adjustment.
Rounded wall runner for trimming vinyl sheet goods or cut pile carpets.
Anti-friction boot prevents scratching when used to trim vinyl.
Spring-loaded center knob for blade height adjustment.
Takes slotted razor blades for trimming vinyl, or hook blades for trimming carpet.
Troxell Super-Soft knee pads size regular/medium in royal blue color.
Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
Straps fasten to the front face of the pad using hook and loop fasteners.
Troxell Super-Soft knee pads size large in royal blue color.
Durable neoprene construction with polyurethane protective coating. High density closed cell foam inner pad.
Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
Straps fasten to the front face of the pad using hook and loop fasteners.
Troxell “Leather Head” knee pads, size: large.
Durable neoprene construction with leather cover. High density closed cell foam inner pad.
Wide flexible straps won’t pinch the back of the leg even when wearing shorts.
Straps fasten to the front face of the pad using hook and loop fasteners.
Slices glued-down carpet into strips for faster removal, and great for rough cutting carpet off roll.
Comes with sharp, hardened steel point with precision slot to guide utility blade.
Point punctures glued-down carpet for fast starts. As pushed it rides on subfloor, lifting carpet to the blade.
Heavy-duty fiberglass handle adjusts from 50” – 85” for optimal angle. Takes hook or utility blades.
Sharp, hardened replacement point for the No. 265 Stand-Up Cutter with precision slot for utility blade.
Quickly punctures glued-down carpet for fast starts.
As the point is pushed, it rides on the subfloor and lifts carpet to the blade where it is cut.
Includes one each replacement point only. No blades are included.
Silver metal corners for covering a sheet vinyl outside corner.
Covers up problems and are an excellent solution for repairs.
Made approximately 6” long to cover the corner from floor height up to 6”.
Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
Silver metal corners for covering a sheet vinyl inside corner.
Covers up problems and are an excellent solution for repairs.
Made approximately 6” long to cover the corner from floor height up to 6”.
Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
Gold metal corners for covering a sheet vinyl outside corner.
Covers up problems and are an excellent solution for repairs.
Made approximately 6” long to cover the corner from floor height up to 6”.
Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
Gold metal corners for covering a sheet vinyl inside corner.
Covers up problems and are an excellent solution for repairs.
Made approximately 6” long to cover the corner from floor height up to 6”.
Easily trimmed shorter using snips. Bottom portion contour matches shape of standard cove.
Moves appliances up to 800 lbs. using high pressure air jets, reducing risk of floor damage and injuries.
Slide the load plates under the load, turn on the blower, adjust the lift control valve, and the air plates lift the load.
Air plates glide the load over hard surfaces. Includes four polypropylene pads to move over carpet.
Includes 2 load plates, 2 HP. Motor and strap, lift control valve, T-connector and hoses, 4 carpet pads, and carrying bag.
Single carrying bag only for Crain No. 280 H.D. Air Lifter.
Padded center compartment protects the motor
Air plates and polypropylene carpet pads tuck in the sides, and hoses and other components in the bottom.
Trim, contoured design saves space and is easily carried. Durable polyester canvas.
45° blade angle of this knife is optimal for scoring and breaking rigid core LVP/LVT.
Elevated handle provides knuckle clearance.
Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
Extra blades can be stored in the handle. Comes with 10 blades. Blades: No. 286C or No. 287.
Specialty blades for No. 285 Personna LVT/LVP Knife.
Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
Pack of 100 blades, incl. 10 "pocket packs" of 10 blades each. Blade dimensions: length: 1.625", width: .75", thickness: .025".
Specialty blades for No. 285 Personna LVT/LVP Knife.
Blades feature a wide beveled edge that scores smoothly with less resistance than utility blades.
Utility blades, by comparison, have a sharp bevel that can slice too deep and stick.
Blister card includes 10 blades. Blade dimensions: length: 1.625", width: .75", thickness: .025".
Takes Accutec® wide-beveled LVP scoring blades.
Long blade carrier provides knuckle clearance, while hook handle produces pressure and pulling power.
Also takes utility blades, hook blades, and Crain No. 321 hook for tough vinyl.
Pivots open for blade storage.
Excels on carpets with zig-zag tufting including commercial loop pile and Berber carpets.
Blade runs directly behind row guide, keeping it away from hydra-shift stopovers.
Reduces shearing of yarns to produce better looking seams.
Also works as a Z-bar or a vinyl molding trimmer.
Pack of 100 Personna® heavy-duty utility blades which are individually wrapped in paper and packaged in a laminated paper box.
These blades can be used in most standard utility knives that take heavy-duty utility blades.
Use in Crain Tools Nos. 070, 189, 247, No. 265, No. 290, No. 300, No. 304, No. 727, No. 728, No. 730, and No. 732.
Blade dimensions: length: 2.40", width: .75", thickness: .025". Individually wrapped blades packaged in laminated paper box.
A multi-purpose tool for cutting and hammering down tackless strip.
Polished head includes 3 ½” blade and hammering head.
Hickory hardwood handle is contoured for gripping.
Durable Vaughan quality product made in the USA!
Pack of 10 blades for the discontinued Crain No. 298 Top Cutter.
When used with the Top Cutter, this elongated blade can double cut carpet from the face.
For use with the Crain No. 298 Top Cutter only.
Blade dimensions: length: 3.00", width: .745", thickness: .025".
Great for rough cutting of carpet off the roll.
Versatile design takes slotted razor, utility, or Crain No. 300Y blades.
With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarns.
Large thumb knob permits simple, fast blade changes.
Pack of 10 replacement blades for the Crain No. 300 Loop Pile Cutter. Packaged in a plastic box with hinged lid that snaps shut.
Blades have 2 holes for a blade screw on early models of the No. 300 (black plastic body), but also work in later models.
When used in the No. 300, they cut the carpet from the backing, reducing the shearing of yarns and wadding up of carpet.
Blades are reversible for added life. Blade dimensions: length: 2.31", width: .75", thickness: .025".
Precision blade pockets on left and right side hold slotted blades without screws.
Trims seam edges close to the carpet’s tufting to produce better seams.
30° blade angle cuts cushion-back carpets cleanly.
Beveled front guide follows the carpet’s rows. Soft grip handle provides comfort and control.
Offset blade clamp allows fast blade depth adjustment and blade changes. Takes standard slotted razor blades.
Front guide has rounded notches to help find rows in difficult carpet including Berbers, hydrashift and commercial level loop.
30° blade angle cleanly trims the carpet's edges for seaming.
Soft grip handle provides control and comfort.
Includes base for cutting over pad or other carpet that protects material underneath.
Blade carrier is adjustable in height so that it locks down on the rows of carpet.
Dual blade pockets on left and right sides, and large thumb knob to lock in the blades.
“Triple tight” 3 thumb knob construction helps produce accurate cuts.
Versatile and durable carpet cutter with steel row guide for improved accuracy.
Takes slotted razor, utility, or Crain No. 300Y blades. Dual springs hold the carpet down.
With utility or Crain No. 300Y blades, it cuts from the backing, without shearing or wadding of yarn.
Steel foot plate reduces wear for long-term durability.
Pack of 100 Personna® regular-duty (.015" thick) round-edge slotted razor blades.
Reduced thickness fits older model Crain tools that take thinner blades (Crain No. 124, 301, 302).
Not recommended for newer Crain tools designed for heavy-duty slotted blades (Nos. 308C/309C - .017” thick).
Blades individually wrapped and come in a laminated paper box. Blade dim.: length: 2.25", width: .75", thick: .015".
Pack of 100 Personna® heavy-duty (.017 thick) round edge slotted razor blades.
Rounded corners of round edge blades ride on the subfloor without digging in and increasing resistance.
Blades are individually wrapped in paper and are packed in a laminated paper box.
Blade dimensions: length: 2.25", width: .75", thickness: .017".
Pack of 100 Personna® heavy-duty (.017 thick) square edge slotted razor blades which are individually wrapped in paper.
Square edge blades provide a sharp, precise point for starting a cut with the knife.
Square edge blades cut to full depth when used in seam cutters such as Crain No. 301 or No. 302.
Blades are packed in a laminated paper box. Blade dimensions: length: 2.25", width: .75", thickness: .017".
Double-needle dividers with rounded radius arm and large wing nut.
Legs span from ½” to 6” apart. Needles press fit into the legs.
Rounded arm provides smooth adjustment and solid hold.
Comes with two needles in the tool and two replacement needles.
Pack of two replacement needles for The No. 310 Dividers.
Approximately 7 /8 ” long and 0.060” in diameter.
Each needle has a sharp point for scribing.
These needles press fit into either leg of the No. 310 Dividers.
Accurately trims sheetgoods net to the wall.
Adjustable front guide holds the material in position against the wall.
Adjustable rear guide keeps the trimmer running parallel with the wall for smooth trimming.
Low profile hand contours help to keep the tool flat against the floor in use. Repl. blades: No. 321.
Pack of three hook blades for the No. 321 Vinyl Wall Trimmer.
Reversible blade includes two cutting hook edges.
Blades come in a plastic box with hinged lid for storage.
Blade dimensions: length: 2.30", width: .50", thickness: .025".
Pivots open by pressing the spring-loaded rear button to access the slotted razor blades.
Contoured red handle includes knurling on both sides for improved grip.
Large radiused fin behind the blade carrier for thumb pressure and improved control.
This carpet knife takes slotted razor blades.
20 oz. claw hammer for hammering down and pulling up tack strip.
Forged, induction hardened steel head includes magnetic nail holder.
Durable fiberglass handle is jacketed for overstrike protection.
Handle includes contoured grip. Fully featured and excellent value.
Hand roller for vinyl with three rubber rollers.
Rollers produce good pressure without scratching or scuffing.
Rolls a 7 ½” section each pass. Recessed axle works close to walls without scratching.
Twist-lock tube assembly adjusts handle length from 17” to 27”.
Six foot straight edge for making seams in sheet vinyl and like materials.
Precision edges are ground for straightness with accuracy of +/-.003”.
Made from special spring steel that will return to its flat condition even after being bent.
One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 6' x 3" x 1 /8 ".
Four foot straight edge for making seams in sheet vinyl and like materials.
Precision edges are ground for straightness with accuracy of +/-.003”.
Made from special spring steel that will return to its flat condition even after being bent.
One end is formed at a 45° angle for pattern work. Painted blue to reduce rusting. Dim.: 4' x 3" x 1 /8 ".
Replacement blade for the No. 336 Undercut Saw for hand undercutting of wood door jambs.
Blade includes studs for mounting to the bracket of the No. 336 Undercut Saw.
Trapezoidal shape provides clearance.
Includes 12” row of 10 point teeth on both sides. Made from high carbon steel for good blade life.
Hand undercutting saw with heavy-duty wood handle, steel bracket, and replaceable 12” blade.
Trapezoidal high carbon steel blade includes a row of 10 point teeth on both sides.
Saw includes a front knob for working with both hands to increase cutting power.
Good for cutting wood door jambs by hand. Replacement blade: No. 335.
8” duster brush made with durable blended horsehair bristles.
Tends not to scratch on most floors.
Wooden handle is very tough and impact-resistant.
Bristle area: 8” long x 2 ½” wide. Handle length: 5”. Great for use with dust pan (Crain No. 666).
One replacement blade for the Crain No. 338 Flex Undercut Saw.
Flexible blade bends at the floor for hand undercutting wood door jambs.
Both sides of blade have a 9 inch double row of staggered, ultra-fine induction hardened teeth.
Blade provides easier starts, fast cutting, and smooth results.
Trims the factory selvage, so the sheet can be accurately scribed and seamed.
Insert the selvage edge in the guidance slot, and the blade is properly positioned.
Simply pull the tool through the material and the selvage is removed.
Replaceable U-shaped blade makes a clean, square cut.
One each replacement blade for the No. 340 Selvage Trimmer.
Trims the factory selvage so the sheet can be accurately scribed and seamed.
U-shaped blade ensures a smooth, accurate cut.
Trimmed edge will be perpendicular to the floor to match an adjacent edge.
One each replacement blade for the No. 340 Selvage Trimmer.
Trims the factory selvage so the sheet can be accurately scribed and seamed.
U-shaped blade ensures a smooth, accurate cut.
Trimmed edge will be perpendicular to the floor to match an adjacent edge.
Includes one each replacement blade for the Crain No. 344 Score Tool.
Marks a score line on plastic laminate or cementitious backer board materials.
After scoring, the material breaks along the desired score line cleanly and easily.
Blade includes two carbide tips and is reversible in the handle of the No. 344 Score Tool.
Hand roller for plastic laminate installation.
3” wide solid rubber roller produces 30 – 45 PSI for positive bonding.
Rubber roller material is non-marking.
Offset handle and recessed axle allow the roller to work close to the wall without scratching.
Seam roller for hand rolling vinyl with square edge and long nine inch wooden handle.
Square edge and offset bracket allow the roller to work up close to walls.
Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
Ball bearing construction produces smooth rolling action.
Seam roller for hand rolling vinyl with square edge and shorter six inch wooden handle.
Square edge and offset bracket allow the roller to work up close to walls.
Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
Ball bearing construction produces smooth rolling action.
Seam roller for hand rolling vinyl with round edge and long nine inch wooden handle.
Round edge of this roller allows it to work up close to vinyl flash coving.
Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
Ball bearing construction produces smooth rolling action.
Seam roller for hand rolling vinyl with round edge and shorter six inch wooden handle.
Round edge of this roller allows it to work up close to vinyl flash coving.
Roller face has an ultra-smooth, zinc-plated surface finish to minimize scratching.
Ball bearing construction produces smooth rolling action.
Top quality hand stripper with 12” long handle and zinc alloy head and blade clamp for durability.
Blade clamp is fastened with 3 case hardened slotted head screws.
Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
Pack of 10 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
The .020” thickness provides the right flexibility for fine floor prep. work.
These blades work especially well for removing adhesive residue from concrete floors.
Vial of ten blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
Bulk pack of 100 blades for the No. 350 Floor Stripper and No. 360 Pro Stripper.
The .020” thickness provides the right flexibility for fine floor prep. work.
These blades work especially well for removing adhesive residue from concrete floors.
Vial of 100 blades with resealable cap. Dimensions: Length: 4.00", Width: .560", thickness: .020".
Hand saw for removing old or damaged grout. Angled steel bracket keeps hand from contacting the floor.
Comes with carbide blade coated with carbide grit for cutting out grout between tiles. Minimum grout joint width 1 /8 ”.
Comes with steel-toothed blade for heavy cleanout work after using the carbide blade.
Both blades can be used for thick grout joints or using steel blade to protect walls when sawing near walls.
Replacement blades for the Crain No. 353 Grout Saw. Minimum grout joint width 1 /8 ”.
Includes one carbide blade coated with carbide grit, and one steel-tooth blade.
Steel-toothed blade can be used along with carbide blade for wide grout lines.
Steel-toothed blade can be used along with carbide blade to protect walls when grout line is close to wall.
Leather pocket pouch sized 4 ½” wide to slide easily into a pants back pocket.
Small items like a knife or row finder wedge securely in the 3” wide x 4 ½” deep inner pocket.
Outer flap hooks over the pants pocket to protect it and help keep the pouch from sliding out.
Durable stitched and riveted construction. Includes 2” belt slots. Outer dimensions: 4 ½” x 7 ½”.
Tungsten carbide hole saw cuts clean 1 3/8” holes for pipe clearance.
Works well on ceramic and soft-bodied quarry tile.
Replaceable ¼” masonry bit holds a center. Internal spring ejects the cut piece out.
Works with a drill (not included).
Top quality hand stripper with 20” handle for two handed operation and additional reach.
Head and blade clamp made from durable zinc alloy. Blade clamp fastens with 3 case-hardened slotted screws.
Oversized vinyl grip has a rounded knob on top to fit comfortably in the palm.
Comes with one No. 351 .020” thick floor stripper blade which works well for fine floor prep.
Steel body includes a wedge with forked edge on one end and a push pin on the other.
For hinges that are open at the bottom, insert the pin and tap to push the pin up.
Otherwise, insert the fork-shaped edge under the pin and hammer to lift the pin.
Once lifted, the fork is used to lift the pin all the way out.
Wedge-shaped tool with forked shaped edge and capture spring to hold the pin.
Capture spring holds the greasy pin on the fork so it won’t fall on the carpet.
For hinges that are open at the bottom, insert the pin end and tap to force the pin up.
Otherwise, insert the fork-shaped edge under the pin and hammer wedge up.
Double-ended tool with a pointed end for cut pile and a beveled end for loop pile.
Pointed end has a narrow point to penetrate the row and a wider conical surface to spread the tufts.
Beveled end spreads loops of loop pile and Berber carpets without snagging.
Reduces nap shear. Made from solid steel and nickel plated.
Ultra-straight spring steel row finder with smooth, rounded notches.
Rounded ends easily enter the rows of Berber and loop pile carpets without catching loops.
Move back and forth in a sawing action to open the row.
Textured plastic handle provides good grip.
Ultra-straight spring steel row finder with smooth, rounded notches.
The pointed ends easily enter the rows of dense cut pile or plush carpets.
Move back and forth in a sawing action to open the row.
Textured plastic handle provides good grip.
Sturdy steel frame with 3 ½” throat depth and high-impact plastic pistol grip handle.
Comes with steel cutting blade.
Frame accepts 10” or 12” blades. Blades are mountable in line with frame or at 90°, 180°, or 270° angles.
Frame is plated to resist rust.
Includes two each 12” carbon steel hacksaw blades for use with No. 368 Deluxe Hacksaw.
Blades have 32 teeth per inch.
Good for cutting aluminum cap metal and other accessory trims using the No. 176 Miter Box.
Can also be used to cut mild steel, cast iron or copper.
Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
Top portion adjusts the needle height based on material thickness.
Bottom portion adjusts offset between needle the guide being used. Offset range: about 2”.
Includes rounded end guide for walls and bottom guide for seam scribing. Replacement needles: (No. 371).
Includes one replacement needle for No. 370 Recess Scriber or No. 375 18” Scribing Tool.
Needle diameter: approx. 0.063”
Needle length: 1 1 /2 ”
Needle is sharp on one end for scribing.
Accurately scribes longer widths from 2” to 16”. Needles are replaceable (No. 371).
Knurled two part brass thumb knob for all necessary adjustment without a screwdriver.
Top portion adjusts the needle height based on material thickness.
Bottom portion adjusts offset from the rounded end guide for walls or bottom guide for seam scribing.
Stand-up telescoping tube scraper with wide 8” blade for heavier removal work.
Telescoping tubular handle adjusts from 39” to 59” using a simple twist lock mechanism.
Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
Great for stand-up scraping work. Comes with a No. 376 .037” thick blade, and blade cover.
Shorter version of the Big Scraper with telescoping tubes and wide 8” blade for use while kneeling.
Telescoping tubular handle adjusts from 19” to 26” using a simple twist-lock mechanism.
Scraper head is steel-reinforced. Blade clamp fastened with 4 case hardened slotted head screws.
Great to scrape wider sections while kneeling. Comes with No. 376 .037” thick blade, and blade cover.
Pack of 3 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
Wide 8” blade removes the widest section of material of any Crain scraper blade.
Good for hand scraping of heavier adhesive residue.
Comes in plastic vial of 3 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
Pack of 9 replacement blades for the Crain No. 375 Big Scraper or No. 375S Short Big Scraper.
Wide 8” blade removes the widest section of material of any Crain scraper blade.
Good for hand scraping of heavier adhesive residue.
Comes in plastic vial of 9 blades with resealable cap. Dimensions: 8" long x .750" wide x .037" thick.
Forged steel bent leg with sharpened point and adaptable straight leg for marking.
Adaptable straight leg takes a scriber with needle or inking leg.
Scribes up to 14” span. Bent center leg permits easier scribing along walls.
Knurled steel thumb screws & needle holders. Repl. needle: No. 129. Inking leg: 1380-P
Rounded body fits comfortably in the user’s hand.
Bent leg and removable straight leg spans up to six inches.
Adjusts using a folding thumbscrew. Bent leg allows easier wall scribing.
Both legs have knurled steel caps to hold replacement needles (No. 129).
Hand scraper with metal knob handle for hammering with a rubber mallet to scrape hard spots.
Knob also has rounded edges to fit the palm.
Long 18” handle, steel reinforced head, and blade clamp with three case hardened screws.
Comes with a wide 5” blade (No. 391) with .037” thickness of our Big Scraper blades for heavy removal work.
Pack of ten replacement blades for the Crain No. 390 Inertial Scraper.
Wide 5” blades are made with the same .037” thickness as our heavy-duty Big Scraper blades.
Stout blades can scrape up hard spots.
Come in a plastic vial of ten blades with resealable cap.
Replacement carbide wheel for Crain Nos. 030, 031, 032X, and 033X Ceramic Tile Cutters.
Wheel dimensions: approximately 1 /2 ” in diameter x .075” thick.
Wheel center hole: 1 /4 ” diameter.
Replacement fasteners including a steel bushing, washer, screw and lock nut are included.
Converts between 4 most needed Phillips and slotted screwdriving tips, and provides 2 nutdriver sockets.
Includes #1 and #2 Phillips tips, 3 /16 " and 5 /16 " slotted tips, and 1 /4 " and 3 /16 " nutdrivers
Made with high-impact plastic ribbed handle for sure grip.
Heat-treated alloy steel socketed drive shaft.
Square leather pouch hangs from the belt.
Deep 3 ¾” x 5 ½” rectangular pocket with 1” wide opening to quickly insert larger items.
2 ¼” wide slots go onto most belts.
Durable riveted construction. Outer dimensions: 4 ¼ x 7”.
1 /16 ” open x 1 /16 ” flat x 1 /16 ” deep square-notched trowel.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade. Add "L" to the No. 420 for left-handed model (i.e. No. 420L).
1 /16 ” open x 1 /16 ” flat x 1 /16 ” deep square-notched trowel. Blade is notched on the left side of the blade for left-handed users.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /16 ” open x 1 /4 ” flat x 1 /16 ” deep V-notched trowel.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /16 ” open x 1 /32 ” flat x 1 /32 ” deep U-notched trowel.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade. Add "L" to the No. 422 for left-handed model (i.e. No. 422L).
1 /8 ” open x 1 /16 ” flat x 1 /8 ” deep V-notched trowel.The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade. Add "L" to the No. 423 for left-handed model (i.e. No. 423L).
1 /8 ” open x 1 /16 ” flat x 1 /8 ” deep V-notched trowel. Blade is notched on the left side of the blade for left-handed users.The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
3 /32 ” open x 3 /32 ” flat x 3 /32 ” deep V-notched trowel.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /4 ” open x 3 /16 ” deep V-notched trowel.The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /4 ” open x 1 /4 ” flat x 1 /4 ” deep square-notched trowel.The front edge is square and notched for "cutting in" or spreading adhesive in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /2 ” open x 1 /2 ” deep V-notched trowel.The front edge is square and notched for "cutting in" or spreading adhesive or mortar in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /4 ” open x 1 /4 ” flat x 3 /8 ” deep square-notched trowel.The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /2 ” open x 1 /2 ” flat x 1 /2 ” deep square-notched trowel.The front edge is square and notched for "cutting in" or spreading mortars or adhesives in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /8 ” open x 1 /16 ” flat x 1 /8 ” deep U-notched trowel.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1 /16 ” open x 1 /16 ” flat x 1 /16 ” deep V-notched trowel.Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
3/16” open x 1/2” flat x 1/4” deep V-notched trowel.
Front edge is square and is notched for "cutting in" or spreading adhesive in tight areas like corners.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
1/8” open x 1/16” flat x 1/8” deep V-notched trowel.
Front edge is angled back 10° for clearance when spreading close to the wall.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
4” wide x 14” long trowel with no notches.
Useful for spreading patch.
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
Made with two pivoting axles each with seven steel star wheel wheel rollers (14 total).
As the roller is moved forward and backward, the axles pivot outwardly then inwardly.
This action mixes carpet fibers and pulls the seam edges together.
Star wheels press the carpet’s backing into the adhesive.
Solid axle with ten steel star rollers.
Star wheels effectively press the carpet’s backing into the hot melt adhesive.
Welded steel handle bracket is plated.
Rounded handle fits well in the palm of the hand.
Made with wide ribbed roller sections.
Wide surface area on the ribbed surfaces protect delicate fibers better than star wheels.
Ribs produce concentrated pressure forcing carpet backing into the adhesive.
Best roller for fine denier saxony, plush, and velvet carpets.
Solid axle spans six inches wide and has 18 steel star wheel rollers.
Provides adequate pressure even with 6” tape.
Steel bracket and handle stem are welded and plated for durability.
Hard plastic handle is rounded to fit well in the palm of the hand.
4" wide x 16" long trowel with no notches for spreading patch.
All four corners are rounded at a 2” radius to prevent them from gouging the patch
Wooden handle is curved for comfortable grip.
Handle bracket is welded to the spring steel blade.
Recessed trigger for length adjustment in five settings from 17¾" to 21¾".
Visual pin depth dial provides nine different depth settings.
Power rods through pin plate provide support and improved force transfer.
Three nap grips, pin plate with 16 pins, standard thickness bumper.
Long 1 7 /8 ” blades cut wide architectural strip straight in a single cut.
Cuts regular strip straight or diagonally in a single cut.
Blade stabilizer prevents splaying of the blades to increase cutting efficiency.
Handle includes blade storage, travel adjustment, and locker for closing in storage.
Package of 12 replacement blades for the Crain No. 450 Deluxe Strip Cutter.
Cuts wide architectural strip straight in one cut.
Cuts regular strip straight or diagonally in one cut.
Packaging includes clear plastic box that snaps shut for storage.
Heavy-duty cloth bag slips over standard sized tack strip boxes.
Extra protection prevents boxes from tearing open to protect the strip.
Reinforced end panel with heavy-duty zipper and double-stitched handle.
Projects a professional image and improves efficiency.
Includes three 2 ½” rows of star wheels mounted on a durable steel body.
Produces pressure on the seam to press the backing into the adhesive.
The three rows of star wheels mix yarns to reduce visibility.
Long, rounded body is optimal for hand pressure.
Economical impact-resistant safety glasses.
Soft sides create comfortable fit against the face.
Include elastic strap.
Clear direct ventilated frame permits peripheral vision.
Angled handles easily position the blades for trimming off carpet tufts.
Extra-long 3” blades.
Finger loops are oversized for large fingers.
Right side loop accommodates multiple fingers for easy activation.
Includes the driving head, tail block, transfer tube and head case.
Head case additionally holds an Auto-Lok tube and three extension tubes (not included).
Head case has wheels for easy transport.
Head case is made from tough blow-molded plastic with recessed latches and handles.
Includes three extension tubes, Auto-Lok tube, and tube case.
Tube case has recesses that hook on our head cases with wheels for easy transport.
Made from tough yet lightweight high-density blow-molded plastic.
Recessed latches and handles improve durability.
Includes the tube case only. Holds an Auto-Lok tube and up to three additional extension tubes.
Tube case has recesses that hook on our head cases with wheels for easy transport.
Made from tough yet lightweight high-density blow-molded plastic.
Recessed latches and handles improve durability.
Power handle has built-in stretch lock for partial stretches.
Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
Pin depth adjustment knob adjusts without screws or screwdrivers.
Double case design distributes weight and provides room for extra components. Built-in wheels for transport.
Includes both head and tube cases.
Holds the driving head, transfer tube, tail block, Auto-Lok tube, and 7 more extension tubes.
Head case includes wheels, and tube case hooks on the head case for easy transport.
Cases split to distribute weight. Also holds Roberts 10-239.
Power handle has built-in stretch lock for partial stretches.
Comes with Auto-Lok tube, 3 extension tubes, transfer tube, and folding tail block.
Pin depth adjustment knob adjusts without screws or screwdrivers.
Space saving single case design includes wheels for transport.
For use on Crain No. 499 and 500 Power Stretchers.
Recommended when stretching Berber, loop pile, and low-level commercial carpets.
Wire nap grips are less likely to pull or snag loops.
Installs easily. Nap grips are replaceable.
Provides ultra-fast length adjustment for a connected train of extension tubes!
Push back on the tubes to extend, push buttons and pull back to shorten.
Adds up to 4 feet 8 inches to the stretcher in convenient 1½ inch increments.
Works with standard-sized diameter tubes.
Adds up to 4 feet 8 inches of length.
Holes are punched rather than drilled for durability and precision.
Buttons are rounded for smooth tube adjustment.
Works with other standard size diameter poles.
Includes the head case only.
Holds the driving head, transfer tube, tail block, Auto-Lok tube, and up to 3 additional extension tubes.
Case has wheels for easy transport.
Tough yet lightweight blow-molded plastic. Latches and handles are recessed for added durability.
Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
Visual pin depth dial provides nine settings for various carpets.
Power rods through pin plate provide support and improved force transfer.
Three nap grips, pin plate with 16 pins, standard thickness bumper.
Provides a full and uniform stretch across the stair tread.
Begin at the top of the stairs and work downwards.
Stretch then tuck the stair below. Prevents sore knees!
Comes with carrying case.
Top hand lever permits fast extension or retraction of the stretcher tail.
Bottom floor lever unlocks when the stretcher head is lifted off the floor, allowing head to extend or retract.
Floor lever includes lock pin to lock the floor lever as desired (including for transport).
Works with other Junior Power Stretchers with standard size poles (1 3 /4 " inside diameter).
Replacement part for No. 512 Mini-Stretcher or No. 514 Mini-Stretcher w/Seam Att.
When attached, works as seam repair stretcher by pulling carpet together.
Can also be used for pattern matching when attached.
Top knob provides fast adjustment of pin depth.
Dual pivoting gripper heads for precision pattern matching.
Restretch with the open top wall blade for fast tucking
Quick change pushbuttons for attaching gripper heads and wall blade on either end.
Comes with carrying case. Tall seam repair legs are sold separately (No. 519).
Lightweight and rustproof.
Adds up to 4 feet 8 inches of length to a stretcher in 4 inch increments.
Score line on inner and outer tubes to align buttons with holes during length adjustment.
Works with other standard sized tubes.
Lightweight and rustproof.
Adds up to 8 feet 8 inches of length to a stretcher in 4 inch increments.
Score line on inner and outer tubes to align buttons with holes during length adjustment.
Works with other standard sized tubes.
Stretches carpet across the stair tread and forms it around the nosing.
Hook the teeth in the carpet near the nosing, then pull down on the handle.
A pulling action is generated that stretches the carpet.
Bottom edge tucks up under the nosing. Recesses allow easy stapling.
Two tall seam repair legs only for Crain No. 515 Mini-Stretcher.
They create a 9” high by 10” wide working area to run a seaming iron beneath the stretcher.
Legs include quick release pin to connect to the stretcher and holes for fastening to pin plate assembly.
Stretcher and pin plate assemblies are sold separately.
60° of free swivel for patterned carpet. Head locks at straight, 15° or 30° angles.
Power handle has built-in stretch lock for partial stretches.
Comes with Lever Extension tube, 3 extension tubes, and transfer tube.
Comes with folding tail block. Available in double cases only.
For use on Crain No. 520 Swivel-Lock Stretchers.
Recommended when stretching Berber, loop pile, and low-level commercial carpets.
Wire nap grips are less likely to pull or snag loops.
Installs easily. Nap grips are replaceable.
Includes three replacement blades for the Crain Seammate doorway seaming tool.
Each blade has a 23” long razor sharp edge for scoring the carpet’s backing at the doorway seam location.
Marks a straight line on the carpet’s backing which can be trace cut with a knife.
Blade dimensions: length: 23.27", width: .560", thickness: .020".
Wider head with 4 gripper inserts and an extra row of pins moves more carpet each kick.
Extra thick bumper absorbs more impact for comfort.
Durable telescoping steel tube construction with 4 length adjustments (21” - 25”).
Visual pin depth dial provides nine settings for various carpets.
Gouges out the back side of the base material for tight wrapped corners.
Double-tipped reversible blade includes both “V-tip” and “U-tip”.
Use V-tip for tight 90° corners, and U-tip on fuller corners.
Gouging depth is adjustable using a simple set screw.
Double-tipped replacement blade only for the No. 530 Rubber Base Gouge.
Gouges out the back side of the cove base to produce tight wrapped corners
Use V-tip for tight 90° corners, and U-tip on fuller corners.
Reversible blade conveniently sockets into the handle.
Forms a 5 /32 ” wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners.
Groove removes excess fullness at the corner that can cause the base to pucker and gap.
Grooving depth adjustable using knurled steel nut. Rounded wood handle comfortably fits the palm.
Blade is replaceable and resharpenable (No. 533).
Includes one each replacement blade only for the Crain No. 532 Topset Gouge.
Forms a 5 /32 ” wide groove on the back side of vinyl or rubber cove base.
Produces tight-wrapped corners by reducing excess fullness which can cause gaps and puckering.
Blade is resharpenable.
Three foot aluminum straight edge useful for most carpet installation purposes.
Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
Includes 45° angle on one end, and a hanging hole on the other.
Economical and lightweight. Dimensions: 36" long x 2 1 /2 " wide x 3 /16 " thick.
Six foot aluminum straight edge useful for most carpet installation purposes.
Serrated slip-proof bottom helps it stay put on the carpet’s backing while cuts are made.
Includes 45° angle on one end, and a hanging hole on the other.
Economical and lightweight. Dimensions: 72" long x 2 1 /2 " wide x 3 /16 " thick.
Top quality compound leverage metal snips great for making straight cuts in aluminum accessory trims.
Alloy steel blades make up to 1 11 /16 ” long cuts and provide durability for long term performance.
Handles include “soft-touch” grips which reduce twisting in the hand under forceful squeezing.
Can cut sheet metal when necessary.
Economical hammer tacker for stapling pad takes 5000 series pad staples, ½” crown x 5/16” leg.
Bottom-loading magazine makes loading staples or clearing jams easy.
All-steel driving mechanism is durable.
Thick rubber grip provides comfort and control.
Adjustable stapling tool that works close to walls generally within the width of one board.
Adjusts to different engineered plank thicknesses from 3 /8 ” to 3 /4 ” with the adjustable foot plate.
Insert a staple in the channel and hammer into the subfloor using the unique offset driver.
Tool includes separator for separating individual staples. Takes 18 gauge (1 /4 " crown) staples.
Replacement carbide-tipped blade for use on Crain No. 545 or No. 555 undercut saws.
36 tooth blade approximately 5 ½” diameter blade.
For use cutting wood base, moldings, door jams and drywall only.
Not for use in cutting metal, masonry, ceramic tile, or stone.
Steel pull bar designed to take heavy hammering when necessary to pull planks together.
Boxed “knuckle-shaped” hammering head is welded to the body.
3 /16 ” thick body is made 3” wide to reduce bending down the length as tool is hammered.16 1 /2 ” long overall for 14 1 /2 ” working room when used near wall. Felt pads reduce scratching.
Maintains expansion gap between the wall and the plank even when the wall is undercut.
With the V-shape, one end goes in the gap, and the other braces on the face of the plank.
Two ends have different thicknesses, one 3 /16 ” and the other 1 /4 ” for manufacturer’s specifications.
Eliminates tipping problems with other spacers. Comes in a pack of 10 spacers.
Block for tapping and moving planks while also protecting the edges of the plank.
Block is sized 3” wide x 7” long x ¾” thick. Bottom is relieved on a side and an end.
Put the block on a plank at a relieved edge and it can tap the plank against its outer edge.
Reduces risk of chipping the plank. Large plastic handle makes it easy to move and position.
Used to space planks from the wall to form the expansion gap necessary with plank floors.
Provides variable spacing when the wall adjacent to the planks is not straight.
Large threaded pushrod is turned using the oversized ergonomic twist knob.
Knob has a steel hex insert for a hex wrench. Pressure pad has rubber insert to protect walls.
Pulls planks together across lengths of up to 19 feet.
Nylon strap coils internally as strap is retracted and stays out of the way.
Long base hooks onto planks even under toe spaces.
Includes large knob for rapid retraction after clamping is complete.
Adaptor to Crain No. 565 18’ Strap Clamp holds bullnose in place as the glue dries, or for hands-free nailing.
Slides on the base of the clamp to create a large, radiused clamping surface conforming to 1” bullnose material.
Radiused clamping surface includes a felt pad to prevent scratching the bullnose.
Strap Clamp and adaptor sold separately.
113 /4 ” solid plastic block with a long, U-shaped handle for greater control.
Use with a hammer to tap the sides or ends of the boards to eliminate gaps. Reduces risk of damage.
Relieved on one side and one end to fit over the tongue of the board and contact squarely against the side.
Dimensions: 3” wide x 113 /4 ’ long x 3 /4 ” thick.
Great way to store nails and quickly dispense them on the job.
Resealable lid is threaded on the clear plastic body and is easily removed to add nails.
Squeezing the clear plastic body opens the lid to dispense the right amount of nails.
After releasing, lid closes and won’t spill. Lid and bottom made from durable thick ribbed vinyl.
Compact, 8 AMP undercut saw works best for fast undercutting of jambs. Also cuts walls and inside corners.
Height of cut adjustable from flush to 1” above floor level. Handle folds for undercutting toe-kicks.
Dual-angle depth gauge allows cutting at “straight on” or 45° angles. Maximum depth of cut: 1 1 /4 ".
Comes with carbide blade, carrying case, blade wrench, and instructions.
Lifts the LVP plank to the angle where it can be tapped and locked tight.
Large upper plastic block contacts just below the face of the plank. Lower plastic contact plate extends to contact the core.
Comes with three 1mm shims and two 3mm shims for planks up to 10mm thick.
Extra contact plates and shims sold separately.
Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
Oval head seats in metal moldings with countersunk holes.
Semi-square body compresses against pre-drilled 1 /8 ” hole.
Fastener dim.: 1 /8 ” dia. X 5 /8 ” long. Hole: 1 /8 ” dia. x 3 /4 ” deep.
High profile body more easily spans over stretcher tubes, plus thicker rubber bumper.
Recessed trigger provides 5 length settings from 18 ½” to 22 ½”.
Visual pin depth dial provides nine depth settings for various carpets.
Power rods support the pin plate and improve force transfer to the carpet.
Designed specifically to hold Duo-Fast No. 5418 Electric Tacker Staples.
Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
Protects boxes and staples in the tool box.
Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
Designed specifically to hold Duo-Fast® No. 7512 Hammer Tacker Staples.
Durable plastic telescoping square tubes with detented internal closure mechanism that holds tight.
Protects boxes and staples in your tool box.
Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
Unique thermoplastic coating and precision ground “sharp point” (SP) 60° angle points.
Efficiently penetrate hardwoods for greater holding power.
Preferred for use in Crain electric tackers for reduced misfiring and jamming.
9 /16 ” Leg - 3 /16 ” crown - 20 GA. Shur-Fast® is a registered trademark of the Shur-Fast® corporation.
Precision glue tip only for popular glue guns at an upright angle in a convenient pulling motion.
Carpet edges that are pre-sealed with hot melt dry quickly and resist fraying.
During seaming, the hot iron reactivates the hot melt, bonding the edges to reduce peaking.
Standard thread (7/16" - 20) fits the Crain Nos. 203, No. 204, No. 207 glue guns and other popular makes.
1 /4 ” diameter nozzle with crimped end. Good for seam edge sealing.Thin opening (1 /32 ” high x 7 /32 ” wide) delivers narrow cross section of glue.
Works in Crain Nos. 203, 204 or 207 Glue Guns or others with standard thread.
Thread size: 7 /16 " major diameter- 20 threads per inch.
Extended 1 /8 ” tube (.085” inside diameter) nozzle.
Works well for sealing the edges of carpet seams.
Works in Crain No. 203, 204 or 207 Glue Guns or others with standard thread.
Thread size: 7 /16 " major diameter- 20 threads per inch.
Ruggedized control board includes electronic sensor that fires in response to motion of a tough sliding trigger.
Eliminates the delicate mechanical microswitch that frequently required repair. Powerful 11 AMP solenoid drives into hardwoods.
Long, slender nose more easily parts yarns and penetrates down to the backing for stapling.
Short height, narrow profile, and rounded cap help it get into tight areas.
Professional grade dust pan stamped from a single sheet of 20 gauge steel.
Beveled lip is 12” wide for sweeping in debris.
Formed with large corrugated ribs in the pan and at corners for extra stiffness and durability.
Painted blade with baked-on enamel finish.
Cuts plank flooring materials up to ¾” thick. Comes fully assembled.
Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
Includes wheels allowing the cutter to be easily moved from a kneeling position.
Movable fence positions planks for straight or 45° diagonal cuts plus cut guide for repeat cuts
Cuts carpet tiles, soft vinyl tiles, LVT planks, and rubber tiles 24” straight or 18” on a diagonal. Works on materials up to ¾” thick.
Includes wheels allowing the cutter to be easily moved from a kneeling position.
Movable fence and tile guide can be set for repetitive straight or diagonal cuts.
Comes fully assembled. Repl. blade: No. 676 Carpet Tile Cutter Blade. Wood cutting blade available: No. 676.
Cuts plank flooring up to 3/4” thick. Cuts up to 9” wide planks.
Cuts a variety of solid hardwood, engineered wood, laminate, and LVT planks. Maximum Janka hardness: 1290.
Movable fence positions the material on either side of the blade for increased blade life.
Comes fully assembled. Replacement blade: No. 681 9” Wood Cutter Blade.
25 foot long 16 gauge 3 conductor grounded extension cord.
Constructed for use with power tools indoors or outdoors.
Rated for usage up to 13 AMPs at 125 volts.
Plug and receptacle are molded on the cordage for durability.
One each steel replacement pin for the No. 686 Stand-Up Carpet Peeler.
This pin is driven beneath the carpet and peels it back using the leverage of the tool.
Made from hardened steel with sharp point.
Easily punctures and gets beneath glued-down carpet.
Hardened, high-carbon steel blade has a 6” long sharpened edge.
Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
Works on Crain No. 700 and No. 710 stripper machines.
Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
Stubby 4” width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs.
Works on Crain No. 700 and No. 710 stripper machines.
Dimensions: 4” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
Hardened, high-carbon steel blade has a 6” long sharpened edge.
5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
Works on Crain No. 700 and No. 710 stripper machines.
Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on side only.
Hardened, high-carbon steel blade has two 6” long sharpened edges, providing double the blade life.
5” width provides some degree of flex that performs well on glued-down carpet removal jobs.
Works on Crain No. 700 and No. 710 stripper machines.
Dimensions: 5” wide x 6” long x .079” thick. Sharp edge is ground to a 30° bevel on both sides.
Hardened, high-carbon steel blade has a 10” long sharpened edge.
Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
Works on Crain No. 700 and No. 710 stripper machines.
Dimensions 3” tall x 10” wide x .079” thick. Sharp edge is ground to a 30° bevel on one side only.
Hardened, high-carbon steel blade has two 10” long sharpened edges, providing double the blade life.
Takes up a wider section when the floor comes up easily. Also good for removing adhesive residue.
Works on Crain No. 700 and No. 710 stripper machines.
Dimensions: 3” wide x 10” long x .079 thick. Sharp edge is ground to a 30° bevel on both sides.
Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
3” width produces a stiffer blade for removing hard-setting adhesive residues.
Good for removing epoxy adhesives, thin-set mortar, or cement-based patch.
Dimensions: 3” tall x 16” wide x .079” thick. Sharp edge ground to 30° bevel on one side only.
Hardened, high-carbon steel blade has a 16” long sharpened edge. For use on Crain No. 700 or No. 710.
5” width produces a blade with more flex for removing soft-setting adhesive residue.
Good for removing latex or urethane-based adhesives, or gypsum-based patch.
Dimensions: 5” wide x 16” long x .079” thick. Sharp edge ground to 30° bevel on one side only.
Power Channel construction produces forward stripping blade motion with more focused energy.
Cam action of the 1 HP motor is channeled straight ahead using steel channels and ball bearings.
Blade carrier forms ultra-low blade angle allowing the blade to get beneath the material to be removed.
Includes 5 1 /2 ” x 3 1 /8 ” x 1 /4 ” Spud Blade for light tile and wood removal, 3” x 10” multi blade, and 35 lb. weight.
Heavy-duty extra-thick stripper blade for removal of ceramic tile or wood floors.
Narrow 3 1 /8 ” ground edge takes up narrow sections as is often required on wood floor takeup.
Long 5 1 /2 ” body provides reach to prevent the blade carrier from contacting surrounding material.
For use on the Crain No. 710 Power Stripper only. Dimensions: Length: 5 1 /2 " x Width: 3 1 /8 " x 1 /4 " thick.
English size #12 (U.S.A. size #0) small open-end sewing thimble.
Works well on small-sized fingers.
Outer surface has coarse grate for pushing the needle point.
Open end helps it stay on the finger and exposes fingertip for gripping.
English size #13 (U.S.A. size #00) medium open-end sewing thimble.
Works well on medium-sized fingers.
Outer surface has coarse grate for pushing the needle point.
Open end helps it stay on the finger and exposes fingertip for gripping.
English size #14 large open-end sewing thimble.
Works well on large-sized fingers.
Outer surface has coarse grate for pushing the needle point.
Open end helps it stay on the finger and exposes fingertip for gripping.
Extra-large open-end sewing thimble.
Works well on the thumb.
Outer surface has coarse grate for pushing the needle point.
Open end helps it stay on the thumb and exposes the end of the thumb for gripping.
Accepts economical 8” long scraper blades for Crain No. 375 Big Scraper (No. 376 or No. 377).
Excellent solution for light stripping such as adhesive or sheet vinyl.
Bolts onto the blade carrier for Crain No. 710 Power Stripper or No. 718 Power Scraper.
Blade clamp fastens with 4 hardened slotted head scraper screws. Heat treated and plated.
Light and highly maneuverable machine with ½ horsepower motor can take up heavy adhesive residue, vinyl or VCT.
Power channel construction forces the blade forward with more focused energy.
Collapses quickly for easy carrying. The all-steel frame and handle provides rigidity and durability.
Includes No. 701 4" x 6" Vinyl Blade, No. 705 3" x 10" Multi-Purpose Blade and narrow No. 719 3½" x 3¾" Thin Spud Blade for tough take ups.
Hardened, high-carbon steel blade has a 3 1 /2 ” sharpened edge.
Takes up a narrow section of material. Works well on tough take-up jobs because it reduces resistance.
Works on Crain No. 710 or No. 718 stripper machines.
Dimensions: 3 3 /4 " tall x 3 1 /2 " wide x .079" thick. Ground to a 30° bevel on one side only.
Slim body hinges open for access to blade storage.
Takes slotted razor blades.
Body includes knurling on both sides for improved grip.
Fin behind the blade carrier for thumb pressure improves control.
Slotted razor blade carpet knife with rear-loading magazine for quick access to blades.
Loosen the folding thumbscrew to release the magazine.
Wide contours for more open, less constricted ergonomic grip.
Precision blade holder holds blades tight at varying blade extension when needed.
Slotted razor blade carpet knife pivots open for quick access to blades.
Loosen folding thumbscrew, and the knife pivots open.
Knife body features wide contours for more open, less constricted ergonomic grip.
Precision blade holder holds blades tight at varying blade extension when needed.
Utility or hook blade knife with hinged body that opens rapidly using a double-lead thumbscrew.
Body can be opened by rolling the wheel across a surface for access to blade storage.
Contoured for enhanced grip with precision blade holder to hold blades tight.
Comes with plastic blade carrier that fits inside a pocket.
A utility blade knife that folds for storage in your pocket.
Durable blade holder locks rigidly.
When opened, body locks rigidly and reliably.
Body is contoured for gripping and includes a blade storage compartment.
Classic utility or hook blade knife with knurled body for solid grip.
Compact design and precision blade holder for detailed cutting in sheet vinyl materials.
Pivots open for blade storage using the folding thumbscrew.
Takes hook or utility blades. Blades: No. 295 (utility) or No. 996 (hook).
More knurling up front plus finger contours for better grip and precise cutting.
Pivots open quickly for blade storage by loosening the folding thumbscrew.
Replacement blades are easily removed by a teeter-totter action generated by internal ridges.
Precision blade clamp with magnet takes hook or utility blades.
Slim profile and heavy knurling on the body and up front provide better grip for precise cutting.
Precision blade clamp with magnet takes standard slotted razor blades (Crain No. 308C).
Extra blades are easily retrieved from storage in the body by loosening the folding thumbscrew and pivoting open.
Blades are easily removed by a teeter totter action generated by internal ridges.
Relieved blade holder exposes a longer cutting surface of the slotted razor blade.
Cuts thick carpet pad more efficiently.
Handle is angled upward to prevent dragging of the knuckles on the pad.
Body pivots open for blade storage by loosening the folding thumbscrew.
Flameless electric heat gun producing hot air up to 750°F for softening, forming and cutting sheet vinyl and VCT.
Adjustable intake cover adjusts temperature from 500°F - 750°F. Fan output is 27 CFM.
3 way switch switches between off, cold, or hot. Cold used to properly cool element.
Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
Carrying case only for Crain No. 745 and No. 995 Deluxe Heat Guns.
Also holds all previous Nos. 740 & 990 Crain Deluxe heat guns (red aluminum housing).
Custom formed interior supports and protects the heat gun in transportation and storage.
Made with dual latches, piano-style hinges, and recessed handle for durability.
Economical hammer tacker for stapling pad takes 7500 series pad staples, 15/32” crown x 3/8” leg.
Bottom-loading magazine makes loading staples or clearing jams easy.
All-steel driving mechanism is durable.
Thick rubber grip provides comfort and control.
Inexpensive 1200 watt heat gun produces adjustable hot air from 250° - 1000°F.
Temperature is adjustable by turning a large knob at the back of the gun.
Three-position switch controls the power and amount of air output at high, low or power off.
Pistol-grip handle is designed to stand the gun upright to prevent damaging the floor.
21 /8 inch long, 16 gauge straight sewing needles.
Made especially for carpet seaming.
Rounded on the eyelet end, sharp on the other.
Sold in pack of 25 needles only.
3 inch long, 16 gauge straight sewing needles.
Made especially for carpet seaming.
Rounded on the eyelet end, sharp on the other.
Sold in pack of 25 needles only.
4 inch, 17 gauge curved sewing needles.
Sometimes called “mattress needles”, but also good for sewing carpet.
Rounded on the eyelet end, sharp on the other.
Sold in pack of 12 needles only.
Three ply waxed 100% polyester hand stitching thread.
Color is natural (beige) similar to the color of carpet backing.
Wax coating passes smoothly through the material being sewn.
Stretches more than linen thread, which may show more seam when used for that purpose.
Waxed three cord natural linen thread.
Wax coating helps thread pass smoothly through the carpet being sewn.
Color is natural (beige) similar to the color of the carpet’s backing.
Works well for hand sewing carpets including seams.
Extended spindle, low-profile head, and flush-mounted blade cuts up to inner wall of a toe-kick.
Hinged depth adjustment plate has five settings for common underlayment thicknesses including 1 /4 ", 3 /8 ", ½", 3 /8 " or ¾".
Comes with No. 787 3 3 /8 " Carbide-Tipped Blade for wood cutting. No. 789 Toe-Kick Saw Diamond Blade sold separately for cutting out tile or grout.
Clutch mechanism that may disengage to reduce kickback.
Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
Oval head seats in metal moldings with countersunk holes.
Semi-square body compresses against pre-drilled 1 /8 ” hole.
Fastener dim.: 1 /8 ” dia. X 7 /8 ” long. Hole: 1 /8 ” dia. x 1” deep.
Solid aluminum nails for fastening tack strip onto concrete, tile, or stone.
Oval head seats in metal moldings with countersunk holes.
Semi-square body compresses against pre-drilled 3 /16 ” hole.
Fastener dim.: 3 /16 ” dia. X 7 /8 ” long. Hole: 3 /16 ” dia. x 1” deep.
Replacement carbide-tipped blade for Crain Model No. 775, 785 or No. 795 Toe-Kick Saws.
3 3 /8 ” diameter with 18 carbide teeth and precision countersunk arbor to flush mount blade screw.
Cuts to fixed depth of 3 /4 ” using the saw.
For cutting wood only. Do not use on any metal, ceramic tile, brick, or stone materials.
2 3 /4 ” diameter carbide-tipped blade for use on Crain No. 785 and No. 795 Toe-Kick Saws only.
When used on these saws, it cuts to a shallower fixed depth of 3 /8 ”. For cutting wood only.
16 carbide teeth, countersunk arbor for flush mounting the blade screw, and two drive holes.
Not for use on Model No. 775 Toe-Kick Saw. Don’t use on metal, ceramic tile, concrete or stone.
Accessory diamond blade for use on Crain Model No. 775, No. 785, or No. 795 Toe-Kick Saws.
2 5 /8 ” diameter continuous rim diamond dry cutting blade for cutting ceramic tile or removing grout.
Cuts to fixed depth of 3 /8 ” using the saw.
For use on ceramic tile, brick, concrete, stone, or removing grout only. Not for use on metals.
Economical steel-toothed blade for discontinued Crain Model Nos. 800 and 810 Super Saws.
Includes 100 steel teeth.
Arbor hole countersunk for flush mounting blade screw. Body has 2 drive holes for blade driver.
For use on wood or dry wall only. Do not use on any metal, ceramic tile, concrete or stone.
Carbide-tipped blade for use on discontinued Model Nos. 800 and 810 Super Saws.
Blade has 40 carbide teeth for a smooth cut and long blade life. For use on wood or dry wall only.
Arbor hole countersunk for flush mounting blade screw. Body has two holes for blade driver.
For cutting wood or dry wall only. Do not use on any metal, ceramic tile, concrete, or stone.
Replacement 6 ½” diameter masonry blade for Crain No. 800, 810, 812, 820 and 825 undercut saws.
Dry cutting composition blade for undercutting masonry walls or hearths.
Produces seven to ten feet of undercutting depending on material and depth of cut.
For use in undercutting masonry materials only. Not for use on any kind of metal.
Carbide-tipped replacement blade for Crain No. 812 Super Saw or No. 825 Heavy-Duty Undercut Saw.
Large 6 ½” diameter blade can fully undercut inside corner areas.
40 carbide teeth and precision-formed steel body produces smooth, accurate cuts.
Not for use on any metal, masonry, stone, or ceramic tile materials.
Accessory 6 ½” diamond blade for the Crain No. 812, No. 820, or No. 825 undercut saws.
Dry-cutting segmented abrasive cutting diamond blade.
Provides superior blade life cutting masonry, ceramic tile, or stone.
Not for use on any metal or wood materials.
Undercuts doors in place, inside corners, and masonry walls and hearths. Vacuum fitting for dust collection.
Diamond blade available as accessory for undercutting tile and stone walls (No. 822).
Dual lead screws provide slip proof height adjustment. Aluminum ratchet handle is highly durable.
Comes with carbide tipped blade (No. 836), masonry blade (No. 805) and carrying case.
Carbide-tipped replacement blade for the No. 835 Heavy-Duty Undercut Saw.
Large 6 ½” diameter blade can fully undercut inside corner areas.
40 carbide teeth produce smooth, accurate cuts.
Not for use on any metal, masonry, stone, or ceramic tile materials.
Bolts onto Crain No. 825 and No. 835 Heavy-Duty Undercut Saws to capture more sawdust and channel towards vacuum port.
Spring-loaded shroud adjusts automatically to the height of cut and follows the floor contour.
Also includes a pivoting depth gauge to control the depth of cut.
Dust cover must be removed to cut inside corners. Do not use the saw without dust cover or depth gauge in place.
The pulling claw features a compound leverage jaw and large contoured handle.
Works great for pulling up glued-down flooring materials. Withstands heavy hand pulling.
Spring-loaded jaw opens automatically to insert an edge of the material. Just insert material and pull.
The harder you pull, the harder the roller activated upper jaw clamps on the material.
Handle assembly only for family of Metal Mitre interchangeable die sets used to make corners in cap metal.
Compound leverage handle generates enough force to punch notched shapes out of aluminum cap.
Die sets fasten onto the cast iron die holder with two fasteners. No die set is included.
Accepts these die sets: No. 846, No. 848, No. 850, or as replacement handle for No. 870 Vinyl Notcher.
Interchangeable Metal Mitre die set only with thick .135” punch for heavier carpet or wall board cap.
Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
NOTE: this punch is too thick to enter the narrow channels of laminate and vinyl cap metal.
For use on aluminum cap metal only. Repl. punch: 1846-A. No handle is included with this die set.
Combo including a handle and die set with thick .135” punch for heavy carpet or wall board cap.
Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
NOTE: punch for this combo is too thick to enter the narrow channels of laminate and vinyl cap metal.
Interchangeable die set only with .090” thick punch for most vinyl and carpet cap with at least 3 /32 ” opening.
Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
For use on aluminum cap metal only. Repl. punch: 1848-A. No handle is included with this die set.
Combo including a handle and die set with relieved .090” thick punch for most vinyl and carpet cap.
Works on cap metals with at least 3/32” opening. For use on aluminum cap metals only.
Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
Interchangeable die set only with .050” thick punch for vinyl and laminate cap with at least 1 /16 ” opening.
Can be used on any Metal Mitre handle (No. 845) to punch out 90° notches necessary to form a corner.
Slender punch for narrow channels. Adapts to handles for the following combos: Nos. 847, 849, 851, 870.
For use on aluminum cap metal only. Repl. punch: 1850-A. No handle is included with this die set.
Combo including a handle and die set with slender .050” thick punch for most vinyl and laminate cap.
Slender punch works on cap metals with at least 1/16” opening. For use on aluminum cap only.
Makes corner shapes fast from aluminum cap metals by punching out 90° notches necessary to form a corner.
Compound leverage handle generates the force needed. Handle works with Nos. 846, 848, 850 die sets.
Makes fast angle cuts in quarter round, eliminating need for a chop saw.
Stout 2 ½” long high carbon steel blade is strong enough and sharp enough to shear cut wood.
Table includes gauge for making 22.5° angle cuts for "soft corners" and 45° angle for square corners.
Extra-long vinyl coated handles provide adequate leverage for cutting.
One each replacement blade for No. 855 Wood Miter that makes angle cuts in wood quarter round.
Stout 2 ½” long blade.
Sharp enough and strong enough to shear cut wood materials cleanly.
Blade is made from high carbon steel for long life.
Specialty combo handle and die set with heavy .156” thick punch for use on vinyl T-moldings only.
Quickly cuts out a relief notch from the insert of the T-molding with 1 /4 ” bottom and 45° side angles.
After relief notch is removed, the T-molding easily forms tight radius bends, such as for corners.
Sold as combo handle and die set only. Die Set for No. 870 is not sold separately.
Makes clean, ultra-straight cuts in vinyl trims much faster than with a knife.
Cut pieces come together perfectly to form more attractive corners.
Tool includes a gauge for cutting the trim at a 45° angle to form a corner, or straight for butt cuts.
Razor sharp blade is replaceable (No. 881).
Pack of 3 replacement blades for the No. 880 Vinyl Mitre.
Blades create 45° cuts in vinyl trims for more attractive corners.
Razor-sharp edges make clean, accurate cuts in the trim so that cut pieces come together perfectly.
Comes in a plastic box that snaps closed for storage.
All-steel case for carrying and protection 3 or 6 inch irons.
Inner partition for a roll of tape and space to loosely lay the iron cord.
Case top is connected by piano-style hinge, and includes plated steel folding handle.
Includes heavy-duty latch with lockable hasp.
Holds Crain 3 inch irons.
Holds other popular 3 inch irons.
Spring clips are riveted to the tray for durability.
Durable all-steel construction with angled clips for hands-free reinsertion of the iron.
Ultra-low profile and narrow handle make it easier to bring the seam together.
Dual indicator lights show power-on and heating status.
Rotating 12’ HSJO cord assembly with flexible strain relief improves cord life.
Base includes non-stick coating. Includes durable riveted iron tray.
Includes No. 905 iron, 25 foot extension cord, and steel case.
Case holds the iron plus a spare roll of seam tape.
Case is made with a durable, smooth-acting piano-style hinge.
Case is made with a plated steel handle and lockable hasp for security.
Works well for resharpening curved carpet and vinyl knives.
Medium Crystolon silicon carbide grit.
Sized 1 1 /4 " wide by 10" long x 3 /4 " thick.
No handle is included with this stone.
An 8” x 12” steel square that’s useful for patterned vinyl flooring layout work.
Legs include rulers on front and back marked in 1 /16 ” graduations.
Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
Dimensions - body: 12" long x 1 1 /2 " wide, tongue: 8" long x 1" wide.
24” x 16” steel square that’s useful for patterned vinyl flooring layout work.
Legs include rulers on front and back marked in 1/8” graduations.
Graduations permanently impressed in the hardened steel body. Clear coating resists rusts.
Dimensions - body: 24" long x 2" wide, tongue: 16" long x 1 1/2".
Works well for resharpening curved carpet and vinyl knives with resharpenable blades.
Made from Crystolon silicon carbide.
Grit is coarse on one side, fine on the other.
Stone size: 1 1 /4 " wide by 10" long x 3 /4 " thick. Handle length: 4 3 /4 " long.
Handle diameter: 1 1 /8 " dia.
Provides basic tools of carpet installation, including:
24” tool box, knee kicker, wall trimmer, cushion back cutter
strip cutter, tool pouch, chalk line & chalk, seam sealer bottle
razor & utility knives, molding lifter, hammer, stair tool, and
nap shears.
Cuts a U-shaped groove at the seam line for welding using a pulling action.
Makes starter grooves for a power groover. Grooves in tight areas and places floors aren’t level.
Adjustable fin tracks in the seam line and controls grooving depth, permitting faster work.
Comes with 3 blades, one pre-loaded in the tool, and two stored in the handle.
Pack of three U-shaped replacement blades for the Crain No. 955 Pull Hand Groover.
Precision formed from high carbon steel, heat treated, and hand sharpened.
Locator hole above screw hole keeps blade rigidly in place on Crain No. 955 groover.
Standard shape fits other popular hand groovers.
Round speed welding tip for the Crain No. 960 Heat Weld Gun.
For use with round 4 mm welding rod.
Air outlet is precisely formed to focus hot air over the seam area.
Standard sized inlet diameter fits the pencil tip nozzle outlet of most other popular heat weld guns.
Adapts our No. 960 Heat Weld Gun to our No. 961 Triangular or No. 962 Round Welding Tips.
Angled outlet is convenient for holding the heat gun and keeping the speed tip on the rod.
Useful in areas where speed tips can’t go such as coved areas.
Standard diameter inlet and outlet outlet fits most popular heat weld guns and speed tips.
Trims excess heat welding rod at the seam without gouging high spots.
Includes sharp, flexible blade that is replaceable and built-in pivoting trim guide.
On first pass, trim with guide under the blade, then pivot guide out and trim second pass.
Eliminates difficult resharpening of quarter moon knives and gouging high spots.
One each replacement blade for the No. 965 Skiving Knife.
Blade is flexible to eliminate gouging of high spots.
Blade is replaceable to eliminate difficult resharpening of quarter moon knives.
Used for trimming excess heat welding rod at the seam areas.
Pack of five replacement blades for the No. 965 Skiving Knife.
Blades are flexible to eliminate gouging of high spots.
Blades are replaceable to eliminate difficult resharpening of quarter moon knives.
Used for trimming excess heat welding rod at the seam areas.
Cuts a groove of consistent depth for heat welding solid vinyl flooring.
Maintains consistent grooving depth when floors aren’t level up to 1 /4 " variation over 1 foot of seamline.
Spring-loaded floor following dust shroud improves dust control.
Includes 12 tooth 130mm carbide-tipped blade (No. 971) and case. Diamond grit blade sold separately (No. 972).
Comes with a Leister Triac ST heat gun for consistent and reliable heat output.
A single dial on the back of the heat gun controls temperature from 104° - 1290°F.
Standard 1 1 /4 ” air outlet fits a wide variety of nozzles.
Comes with pencil tip nozzle, triangular welding tip, round welding tip, and carrying case.
Replacement carbide tipped blade for the Crain No. 970 Power Groover.
12 tooth 130 mm blade works on other groovers that take this size blade.
Cuts a trapezoidal shaped groove in the material. Blade is resharpenable.
Not for use on metal impregnated safety floors (see No. 972 Diamond Groover Blade).
Heavy grit diamond abrasive blade for the Crain No. 970 Power Groover.
Use on metal impregnated safety floors only. Makes an approx. 3.4 mm wide groove.
Continuous rim diamond grit brazed on the entire outside diameter.
130 mm diameter works on other groovers that take this sized blade.
Precision guide wheels track in the seam to cut a groove for welding.
Groove curves with the clip-on foot plate.
Rear blade grooves up close to the wall.
Cuttings flow out the handle. Handle opens for cleaning. Comes with protective bag.
Versatile tip works with 3 mm round, 5 mm round, half-moon, or triangular welding rod.
Adjusting screw at the rod inlet adapts the inlet to the various rod shapes.
Grooved brass pressure roller is also adaptable to the various rod shapes.
Hot air inlet is sized to fit the Crain No. 960 or No. 980 Heat Weld Guns, and other popular models.
Trims excess welding rod from the seam area after cooling making it flush with the floor.
Used in a two-step trimming process with the No. 986 Trim Guide.
Use the trim guide under the blade on first pass, then remove the trim guide on second pass.
Knife is resharpenable and comes with protective pouch.
Depth control guide for the No. 985 Quarter Moon Knife.
Used with the knife to trim excess welding rod in a two-step process.
Insert guide under the knife to remove the bulk of the material on a first pass.
Remove guide on second pass and the knife trims the remaining excess flush to surrounding floor.
Used for welding areas where a speed tip does not work well such coved areas.
Welding rod is threaded through the hollow handle and put under the roller.
Roller has a grove for guiding and pressure the welding rod into the seam.
As the roller presses and holds the rod, a heat gun with pencil-tip nozzle welds it.
A kit of the basic tools needed for vinyl welding at a great price!
Includes: Leister Triac ST heat gun, pencil tip nozzle and round tip.
Also includes: power groover, pull hand groover, skiving knife, selvage trimmer, recess scriber, hook handle utility knife, hand roller, and cleaning brushes.
Includes metal carrying case that holds all the tools.
Flameless electric heat gun producing hot air up to 1000°F for softening, forming and cutting sheet vinyl and VCT.
Adjustable intake cover adjusts temperature from 750°F - 1000°F. Fan output is 27 CFM.
3 way switch switches between off, cold, or hot. Cold used to properly cool element.
Long lasting, replaceable mica element and brushes. Comes with adjustable stand and carrying case.
Pack of 15 high-quality German-made hook blades. Hook shape good for cutting over concrete.
Very good for following score lines on linoleum and making long rough cuts in sheet vinyl.
The blades come in a plastic box with a hinged lid that snaps closed for storage.
Usable with most utility knives and Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.
Pack of 10 Personna® deep hook blades. These blades can be used in most utility knives.
Hook blades keep the cutting edge off the floor when cutting concrete.
Hook blades also good for following score lines in linoleum and making long rough cuts in sheet vinyl.
Blade dim.: length: 2.0", width: .75", thickness: .025". Use in Crain Tool Nos.: 189, 247, 265, 727, 728, 730, 732.
Posts navigation
